High-performance Global Routing for Trillion-gate Systems-on-Chips.

Due to aggressive transistor scaling, modern-day CMOS circuits have continually increased in both complexity and productivity. Modern semiconductor designs have narrower and more resistive wires, thereby shifting the performance bottleneck to interconnect delay. These trends considerably impact timing closure and call for improvements in high-performance physical design tools to keep pace with the current state of IC innovation. As leading-edge designs may incorporate tens of millions of gates, algorithm and software scalability are crucial to achieving reasonable turnaround time. Moreover, with decreasing device sizes, optimizing traditional objectives is no longer sufficient. Our research focuses on (i) expanding the capabilities of standalone global routing, (ii) extending global routing for use in different design applications, and (iii) integrating routing within broader physical design optimizations and flows, e.g., congestion-driven placement. Our first global router relies on integer-linear programming (ILP), and can solve fairly large problem instances to optimality. Our second iterative global router relies on Lagrangian relaxation, where we relax the routing violation constraints to allowing routing overflow at a penalty. In both approaches, our desire is to give the router the maximum degree of freedom within a specified context. Empirically, both routers produce competitive results within a reasonable amount of runtime. To improve routability, we explore the incorporation of routing with placement, where the router estimates congestion and feeds this information to the placer. In turn, the emphasis on runtime is heightened, as the router will be invoked multiple times. Empirically, our placement-and-route framework significantly improves the final solution’s routability than performing the steps sequentially. To further enhance routability-driven placement, we (i) leverage incrementality to generate fast and accurate congestion maps, and (ii) develop several techniques to relieve cell-based and layout-based congestion. To broaden the scope of routing, we integrate a global router in a chip-design flow that addresses the buffer explosion problem.PHDComputer Science and EngineeringUniversity of Michigan, Horace H. Rackham School of Graduate Studieshttp://deepblue.lib.umich.edu/bitstream/2027.42/98025/1/jinhu_1.pd

Algorithmic techniques for physical design : macro placement and under-the-cell routing

With the increase of chip component density and new manufacturability constraints imposed by modern technology nodes, the role of algorithms for electronic design automation is key to the successful implementation of integrated circuits. Two of the critical steps in the physical design flows are macro placement and ensuring all design rules are honored after timing closure. This thesis proposes contributions to help in these stages, easing time-consuming manual steps and helping physical design engineers to obtain better layouts in reduced turnaround time. The first contribution is under-the-cell routing, a proposal to systematically connect standard cell components via lateral pins in the lower metal layers. The aim is to reduce congestion in the upper metal layers caused by extra metal and vias, decreasing the number of design rule violations. To allow cells to connect by abutment, a standard cell library is enriched with instances containing lateral pins in a pre-selected sharing track. Algorithms are proposed to maximize the numbers of connections via lateral connection by mapping placed cell instances to layouts with lateral pins, and proposing local placement modifications to increase the opportunities for such connections. Experimental results show a significant decrease in the number of pins, vias, and in number of design rule violations, with negligible impact on wirelength and timing. The second contribution, done in collaboration with eSilicon (a leading ASIC design company), is the creation of HiDaP, a macro placement tool for modern industrial designs. The proposed approach follows a multilevel scheme to floorplan hierarchical blocks, composed of macros and standard cells. By exploiting RTL information available in the netlist, the dataflow affinity between these blocks is modeled and minimized to find a macro placement with good wirelength and timing properties. The approach is further extended to allow additional engineer input, such as preferred macro locations, and also spectral and force methods to guide the floorplanning search. Experimental results show that the layouts generated by HiDaP outperforms those obtained by a state-of-the-art EDA physical design software, with similar wirelength and better timing when compared to manually designed tape-out ready macro placements. Layouts obtained by HiDaP have successfully been brought to near timing closure with one to two rounds of small modifications by physical design engineers. HiDaP has been fully integrated in the design flows of the company and its development remains an ongoing effort.A causa de l'increment de la densitat de components en els xip i les noves restriccions de disseny imposades pels últims nodes de fabricació, el rol de l'algorísmia en l'automatització del disseny electrònic ha esdevingut clau per poder implementar circuits integrats. Dos dels passos crucials en el procés de disseny físic és el placement de macros i assegurar la correcció de les regles de disseny un cop les restriccions de timing del circuit són satisfetes. Aquesta tesi proposa contribucions per ajudar en aquests dos reptes, facilitant laboriosos passos manuals en el procés i ajudant als enginyers de disseny físic a obtenir millors resultats en menys temps. La primera contribució és el routing "under-the-cell", una proposta per connectar cel·les estàndard usant pins laterals en les capes de metall inferior de manera sistemàtica. L'objectiu és reduir la congestió en les capes de metall superior causades per l'ús de metall i vies, i així disminuir el nombre de violacions de regles de disseny. Per permetre la connexió lateral de cel·les, estenem una llibreria de cel·les estàndard amb dissenys que incorporen connexions laterals. També proposem modificacions locals al placement per permetre explotar aquest tipus de connexions més sovint. Els resultats experimentals mostren una reducció significativa en el nombre de pins, vies i nombre de violacions de regles de disseny, amb un impacte negligible en wirelength i timing. La segona contribució, desenvolupada en col·laboració amb eSilicon (una empresa capdavantera en disseny ASIC), és el desenvolupament de HiDaP, una eina de macro placement per a dissenys industrials actuals. La proposta segueix un procés multinivell per fer el floorplan de blocks jeràrquics, formats per macros i cel·les estàndard. Mitjançant la informació RTL disponible en la netlist, l'afinitat de dataflow entre els mòduls es modela i minimitza per trobar macro placements amb bones propietats de wirelength i timing. La proposta també incorpora la possibilitat de rebre input addicional de l'enginyer, com ara suggeriments de les posicions de les macros. Finalment, també usa mètodes espectrals i de forçes per guiar la cerca de floorplans. Els resultats experimentals mostren que els dissenys generats amb HiDaP són millors que els obtinguts per eines comercials capdavanteres de EDA. Els resultats també mostren que els dissenys presentats poden obtenir un wirelength similar i millor timing que macro placements obtinguts manualment, usats per fabricació. Alguns dissenys obtinguts per HiDaP s'han dut fins a timing-closure en una o dues rondes de modificacions incrementals per part d'enginyers de disseny físic. L'eina s'ha integrat en el procés de disseny de eSilicon i el seu desenvolupament continua més enllà de les aportacions a aquesta tesi

Algorithmic techniques for physical design : macro placement and under-the-cell routing

With the increase of chip component density and new manufacturability constraints imposed by modern technology nodes, the role of algorithms for electronic design automation is key to the successful implementation of integrated circuits. Two of the critical steps in the physical design flows are macro placement and ensuring all design rules are honored after timing closure. This thesis proposes contributions to help in these stages, easing time-consuming manual steps and helping physical design engineers to obtain better layouts in reduced turnaround time. The first contribution is under-the-cell routing, a proposal to systematically connect standard cell components via lateral pins in the lower metal layers. The aim is to reduce congestion in the upper metal layers caused by extra metal and vias, decreasing the number of design rule violations. To allow cells to connect by abutment, a standard cell library is enriched with instances containing lateral pins in a pre-selected sharing track. Algorithms are proposed to maximize the numbers of connections via lateral connection by mapping placed cell instances to layouts with lateral pins, and proposing local placement modifications to increase the opportunities for such connections. Experimental results show a significant decrease in the number of pins, vias, and in number of design rule violations, with negligible impact on wirelength and timing. The second contribution, done in collaboration with eSilicon (a leading ASIC design company), is the creation of HiDaP, a macro placement tool for modern industrial designs. The proposed approach follows a multilevel scheme to floorplan hierarchical blocks, composed of macros and standard cells. By exploiting RTL information available in the netlist, the dataflow affinity between these blocks is modeled and minimized to find a macro placement with good wirelength and timing properties. The approach is further extended to allow additional engineer input, such as preferred macro locations, and also spectral and force methods to guide the floorplanning search. Experimental results show that the layouts generated by HiDaP outperforms those obtained by a state-of-the-art EDA physical design software, with similar wirelength and better timing when compared to manually designed tape-out ready macro placements. Layouts obtained by HiDaP have successfully been brought to near timing closure with one to two rounds of small modifications by physical design engineers. HiDaP has been fully integrated in the design flows of the company and its development remains an ongoing effort.A causa de l'increment de la densitat de components en els xip i les noves restriccions de disseny imposades pels últims nodes de fabricació, el rol de l'algorísmia en l'automatització del disseny electrònic ha esdevingut clau per poder implementar circuits integrats. Dos dels passos crucials en el procés de disseny físic és el placement de macros i assegurar la correcció de les regles de disseny un cop les restriccions de timing del circuit són satisfetes. Aquesta tesi proposa contribucions per ajudar en aquests dos reptes, facilitant laboriosos passos manuals en el procés i ajudant als enginyers de disseny físic a obtenir millors resultats en menys temps. La primera contribució és el routing "under-the-cell", una proposta per connectar cel·les estàndard usant pins laterals en les capes de metall inferior de manera sistemàtica. L'objectiu és reduir la congestió en les capes de metall superior causades per l'ús de metall i vies, i així disminuir el nombre de violacions de regles de disseny. Per permetre la connexió lateral de cel·les, estenem una llibreria de cel·les estàndard amb dissenys que incorporen connexions laterals. També proposem modificacions locals al placement per permetre explotar aquest tipus de connexions més sovint. Els resultats experimentals mostren una reducció significativa en el nombre de pins, vies i nombre de violacions de regles de disseny, amb un impacte negligible en wirelength i timing. La segona contribució, desenvolupada en col·laboració amb eSilicon (una empresa capdavantera en disseny ASIC), és el desenvolupament de HiDaP, una eina de macro placement per a dissenys industrials actuals. La proposta segueix un procés multinivell per fer el floorplan de blocks jeràrquics, formats per macros i cel·les estàndard. Mitjançant la informació RTL disponible en la netlist, l'afinitat de dataflow entre els mòduls es modela i minimitza per trobar macro placements amb bones propietats de wirelength i timing. La proposta també incorpora la possibilitat de rebre input addicional de l'enginyer, com ara suggeriments de les posicions de les macros. Finalment, també usa mètodes espectrals i de forçes per guiar la cerca de floorplans. Els resultats experimentals mostren que els dissenys generats amb HiDaP són millors que els obtinguts per eines comercials capdavanteres de EDA. Els resultats també mostren que els dissenys presentats poden obtenir un wirelength similar i millor timing que macro placements obtinguts manualment, usats per fabricació. Alguns dissenys obtinguts per HiDaP s'han dut fins a timing-closure en una o dues rondes de modificacions incrementals per part d'enginyers de disseny físic. L'eina s'ha integrat en el procés de disseny de eSilicon i el seu desenvolupament continua més enllà de les aportacions a aquesta tesi.Postprint (published version

Graphics Processing Unit-Based Computer-Aided Design Algorithms for Electronic Design Automation

The electronic design automation (EDA) tools are a specific set of software that play important roles in modern integrated circuit (IC) design. These software automate the design processes of IC with various stages. Among these stages, two important EDA design tools are the focus of this research: floorplanning and global routing. Specifically, the goal of this study is to parallelize these two tools such that their execution time can be significantly shortened on modern multi-core and graphics processing unit (GPU) architectures. The GPU hardware is a massively parallel architecture, enabling thousands of independent threads to execute concurrently. Although a small set of EDA tools can benefit from using GPU to accelerate their speed, most algorithms in this field are designed with the single-core paradigm in mind. The floorplanning and global routing algorithms are among the latter, and difficult to render any speedup on the GPU due to their inherent sequential nature. This work parallelizes the floorplanning and global routing algorithm through a novel approach and results in significant speedups for both tools implemented on the GPU hardware. Specifically, with a complete overhaul of solution space and design space exploration, a GPU-based floorplanning algorithm is able to render 4-166X speedup, while achieving similar or improved solutions compared with the sequential algorithm. The GPU-based global routing algorithm is shown to achieve significant speedup against existing state-of-the-art routers, while delivering competitive solution quality. Importantly, this parallel model for global routing renders a stable solution that is independent from the level of parallelism. In summary, this research has shown that through a design paradigm overhaul, sequential algorithms can also benefit from the massively parallel architecture. The findings of this study have a positive impact on the efficiency and design quality of modern EDA design flow

Timing-Driven Macro Placement

Placement is an important step in the process of finding physical layouts for electronic computer chips. The basic task during placement is to arrange the building blocks of the chip, the circuits, disjointly within a given chip area. Furthermore, such positions should result in short circuit interconnections which can be routed easily and which ensure all signals arrive in time. This dissertation mostly focuses on macros, the largest circuits on a chip. In order to optimize timing characteristics during macro placement, we propose a new optimistic timing model based on geometric distance constraints. This model can be computed and evaluated efficiently in order to predict timing traits accurately in practice. Packing rectangles disjointly remains strongly NP-hard under slack maximization in our timing model. Despite of this we develop an exact, linear time algorithm for special cases. The proposed timing model is incorporated into BonnMacro, the macro placement component of the BonnTools physical design optimization suite developed at the Research Institute for Discrete Mathematics. Using efficient formulations as mixed-integer programs we can legalize macros locally while optimizing timing. This results in the first timing-aware macro placement tool. In addition, we provide multiple enhancements for the partitioning-based standard circuit placement algorithm BonnPlace. We find a model of partitioning as minimum-cost flow problem that is provably as small as possible using which we can avoid running time intensive instances. Moreover we propose the new global placement flow Self-Stabilizing BonnPlace. This approach combines BonnPlace with a force-directed placement framework. It provides the flexibility to optimize the two involved objectives, routability and timing, directly during placement. The performance of our placement tools is confirmed on a large variety of academic benchmarks as well as real-world designs provided by our industrial partner IBM. We reduce running time of partitioning significantly and demonstrate that Self-Stabilizing BonnPlace finds easily routable placements for challenging designs – even when simultaneously optimizing timing objectives. BonnMacro and Self-Stabilizing BonnPlace can be combined to the first timing-driven mixed-size placement flow. This combination often finds placements with competitive timing traits and even outperforms solutions that have been determined manually by experienced designers

A Multiple-objective ILP based Global Routing Approach for VLSI ASIC Design

A VLSI chip can today contain hundreds of millions transistors and is expected to contain more than 1 billion transistors in the next decade. In order to handle this rapid growth in integration technology, the design procedure is therefore divided into a sequence of design steps. Circuit layout is the design step in which a physical realization of a circuit is obtained from its functional description. Global routing is one of the key subproblems of the circuit layout which involves finding an approximate path for the wires connecting the elements of the circuit without violating resource constraints. The global routing problem is NP-hard, therefore, heuristics capable of producing high quality routes with little computational effort are required as we move into the Deep Sub-Micron (DSM) regime. In this thesis, different approaches for global routing problem are first reviewed. The advantages and disadvantages of these approaches are also summarized. According to this literature review, several mathematical programming based global routing models are fully investigated. Quality of solution obtained by these models are then compared with traditional Maze routing technique. The experimental results show that the proposed model can optimize several global routing objectives simultaneously and effectively. Also, it is easy to incorporate new objectives into the proposed global routing model. To speedup the computation time of the proposed ILP based global router, several hierarchical methods are combined with the flat ILP based global routing approach. The experimental results indicate that the bottom-up global routing method can reduce the computation time effectively with a slight increase of maximum routing density. In addition to wire area, routability, and vias, performance and low power are also important goals in global routing, especially in deep submicron designs. Previous efforts that focused on power optimization for global routing are hindered by excessively long run times or the routing of a subset of the nets. Accordingly, a power efficient multi-pin global routing technique (PIRT) is proposed in this thesis. This integer linear programming based techniques strives to find a power efficient global routing solution. The results indicate that an average power savings as high as 32\% for the 130-nm technology can be achieved with no impact on the maximum chip frequency

Flow-based Partitioning and Fast Global Placement in Chip Design

VLSI placement is one of the major steps in the chip design process and an interesting subject of research in industry and academia. Recent chips consist of several millions of circuits connected by millions of nets. The classical placement objective of finding positions for circuits and minimizing netlength among them is an ongoing issue in optimization of chip performance. The increasing instance sizes, the tightness of timing and routability constraints impose a real challenge to the design flows and the designers, which often cannot be addressed properly without considering them explicitly within the placement. Many of the complex design methodologies follow an iterative approach, using placement several times in this process. Thus, placement runtime has a severe impact on the turnaround time in chip development. The major contributios of this thesis deal with the global placement, a common relaxation of the placement problem, which computes rough positions of the circuits minimizing the total length of wires to interconnect the. Based on the idea of subsequent quadratic netlength minimization and partitioning, as in BonnPlace [BrennerStruzynaVygen:2008], we present several new algorithms, generalized data structures and a completely new implementation of this top-down placement scheme. We introduce and formalize the concept of movebounds which are position constraints on subsets of cells. Movebounds, which can be regarded as mandatory or soft constraints, provide a mechanism to explicitly incorporate movement constraints to the placement which result from issues of timing, power and routability. With inclusive movebounds, such restrictions can be assigned to groups of circuits without any influence to other placeable objects. The other constraints, namely the exclusive movebounds, are of particular interest for semi-hierarchical approaches, as they can be used to obtain a flat view of the design and prevent cells from being placed into hierarchy units. Both provide a toolbox to the designer and allow the control of particular circuit sets without netlist manipulations. We also present a top-down partitioning scheme and extend the legalization algorithm of [BrennerVygen:2004] to be able to deal with millions of cells and dozens of movebounds efficiently. The presented algorithm can handle different types of overlapping movebounds, even in legalization, and produces significantly better results than a modern industrial tool. We present a novel partitioning algorithm for global placement. Unlike previous iterative and recursive approaches, the new method provides a global view of the problem using a novel MinCostFlow model with extremely fast and highly parallelizable local realization steps. The new flow-based partitioning can address density targets much more accurately and lowers the risk of density violations. The presented MinCostFlow model does not depend on the number of cells, making it highly interesting for large and huge designs. Moreover, the embedded flow structure responds to the chip's floorplan much better than the classical global partitioning approach. Another significant advantage of this algorithm is the fact that it can be applied to any initial placement and guarantees a feasible (fractional) solution (if one exists), improving the tool's reliability, even with movebounds and starting from placements with significant density violations. Using this method we can extend the congestion-driven placement to a combined movement, density adjustment, and cell size inflation approach. This method is able to handle movebounds and guarantees to resolve density overloads properly. Flow-based partitioning creates the opportunity of applying local, density unaware, optimization steps within global placement and allows it to break the strict recursive structure of levels and save runtime. The extended flexibility and runtime improvement are not the only advantages. The proposed flow realization, which is a combination of local quadratic programs and local partitioning, does not only yield a runtime improvement, but also seems to merge connectivity information to partitioning in a much better way than the old recursive partitioning approach. The new flow-based partitioning helps to significantly improve the results of our placement also in terms of netlength. We provide fast data structures for hierarchically clustered netlists and extend the net models Clique and Star to be applied within the clustered netlists efficiently. We show how shared-memory parallelization can be used for speeding up various routines in placement, without the loss of repeatability. In addition, we commit ourselves to the clustering problem, finding circuit groups which should be placed in the vicinity of each other. In order to provide global information for a fast bottom-up clustering, we propose to incorporate connectivity information using random walks. To this end, we show how the hitting times can be efficiently retrieved from large netlist hypergraphs. Due to the proposed model, parallel computation on sparse, shared-memory matrices can be used for computing hitting times to several targets simultaneously. Combined with a bottom-up clustering, even our preliminary approach significantly outperforms the popular BestChoice} algorithm [Nam et al. 2005]. We conclude this thesis by providing several experimental results on a large testbed of real-world chips and benchmarks demonstrating the performance of our tool. Without movebounds, our tool performs as good as a state-of-the-art force directed placer, but is more than 5x faster. We achieve the same speedup over the old BonnPlace, but produce significantly better results, on average more than 8%. With movebounds, our placements are more than 30% shorter compairing to the force-directed placer and our tool is 9x-20x faster. Our tool also produces the best results on the latest ISPD 2006 placement benchmarks

Timing-Constrained Global Routing with Buffered Steiner Trees

This dissertation deals with the combination of two key problems that arise in the physical design of computer chips: global routing and buffering. The task of buffering is the insertion of buffers and inverters into the chip's netlist to speed-up signal delays and to improve electrical properties of the chip. Insertion of buffers and inverters goes alongside with construction of Steiner trees that connect logical sources with possibly many logical sinks and have buffers and inverters as parts of these connections. Classical global routing focuses on packing Steiner trees within the limited routing space. Buffering and global routing have been solved separately in the past. In this thesis we overcome the limitations of the classical approaches by considering the buffering problem as a global, multi-objective problem. We study its theoretical aspects and propose algorithms which we implement in the tool BonnRouteBuffer for timing-constrained global routing with buffered Steiner trees. At its core, we propose a new theoretically founded framework to model timing constraints inherently within global routing. As most important sub-task we have to compute a buffered Steiner tree for a single net minimizing the sum of prices for delays, routing congestion, placement congestion, power consumption, and net length. For this sub-task we present a fully polynomial time approximation scheme to compute an almost-cheapest Steiner tree with a given routing topology and prove that an exact algorithm cannot exist unless P=NP. For topology computation we present a bicriteria approximation algorithm that bounds both the geometric length and the worst slack of the topology. To improve the practical results we present many heuristic modifications, speed-up- and post-optimization techniques for buffered Steiner trees. We conduct experiments on challenging real-world test cases provided by our cooperation partner IBM to demonstrate the quality of our tool. Our new algorithm could produce better solutions with respect to both timing and routability. After post-processing with gate sizing and Vt-assignment, we can even reduce the power consumption on most instances. Overall, our results show that our tool BonnRouteBuffer for timing-constrained global routing is superior to industrial state-of-the-art tools

High-Performance Placement and Routing for the Nanometer Scale.

Modern semiconductor manufacturing facilitates single-chip electronic systems that only five years ago required ten to twenty chips. Naturally, design complexity has grown within this period. In contrast to this growth, it is becoming common in the industry to limit design team size which places a heavier burden on design automation tools. Our work identifies new objectives, constraints and concerns in the physical design of systems-on-chip, and develops new computational techniques to address them. In addition to faster and more relevant design optimizations, we demonstrate that traditional design flows based on ``separation of concerns'' produce unnecessarily suboptimal layouts. We develop new integrated optimizations that streamline traditional chains of loosely-linked design tools. In particular, we bridge the gap between mixed-size placement and routing by updating the objective of global and detail placement to a more accurate estimate of routed wirelength. To this we add sophisticated whitespace allocation, and the combination provides increased routability, faster routing, shorter routed wirelength, and the best via counts of published techniques. To further improve post-routing design metrics, we present new global routing techniques based on Discrete Lagrange Multipliers (DLM) which produce the best routed wirelength results on recent benchmarks. Our work culminates in the integration of our routing techniques within an incremental placement flow to improve detailed routing solutions, shrink die sizes and reduce total chip cost. Not only do our techniques improve the quality and cost of designs, but also simplify design automation software implementation in many cases. Ultimately, we reduce the time needed for design closure through improved tool fidelity and the use of our incremental techniques for placement and routing.Ph.D.Computer Science & EngineeringUniversity of Michigan, Horace H. Rackham School of Graduate Studieshttp://deepblue.lib.umich.edu/bitstream/2027.42/64639/1/royj_1.pd