Distributed control system for parallel-connected DC boost converters

The disclosed invention is a distributed control system for operating a DC bus fed by disparate DC power sources that service a known or unknown load. The voltage sources vary in v-i characteristics and have time-varying, maximum supply capacities. Each source is connected to the bus via a boost converter, which may have different dynamic characteristics and power transfer capacities, but are controlled through PWM. The invention tracks the time-varying power sources and apportions their power contribution while maintaining the DC bus voltage within the specifications. A central digital controller solves the steady-state system for the optimal duty cycle settings that achieve a desired power supply apportionment scheme for a known or predictable DC load. A distributed networked control system is derived from the central system that utilizes communications among controllers to compute a shared estimate of the unknown time-varying load through shared bus current measurements and bus voltage measurements.https://digitalcommons.mtu.edu/patents/1138/thumbnail.jp

Electrical performance characteristics of high power converters for space power applications

The first goal of this project was to investigate various converters that would be suitable for processing electric power derived from a nuclear reactor. The implementation is indicated of a 20 kHz system that includes a source converter, a ballast converter, and a fixed frequency converter for generating the 20 kHz output. This system can be converted to dc simply by removing the fixed frequency converter. This present study emphasized the design and testing of the source and ballast converters. A push-pull current-fed (PPCF) design was selected for the source converter, and a 2.7 kW version of this was implemented using three 900 watt modules in parallel. The characteristic equation for two converters in parallel was derived, but this analysis did not yield any experimental methods for measuring relative stability. The three source modules were first tested individually and then in parallel as a 2.7 kW system. All tests proved to be satisfactory; the system was stable; efficiency and regulation were acceptable; and the system was fault tolerant. The design of a ballast-load converter, which was operated as a shunt regulator, was investigated. The proposed power circuit is suitable for use with BJTs because proportional base drive is easily implemented. A control circuit which minimizes switching frequency ripple and automatically bypasses a faulty shunt section was developed. A nonlinear state-space-averaged model of the shunt regulator was developed and shown to produce an accurate incremental (small-signal) dynamic model, even though the usual state-space-averaging assumptions were not met. The nonlinear model was also shown to be useful for large-signal dynamic simulation using PSpice

Modeling and analysis of power processing systems: Feasibility investigation and formulation of a methodology

A review is given of future power processing systems planned for the next 20 years, and the state-of-the-art of power processing design modeling and analysis techniques used to optimize power processing systems. A methodology of modeling and analysis of power processing equipment and systems has been formulated to fulfill future tradeoff studies and optimization requirements. Computer techniques were applied to simulate power processor performance and to optimize the design of power processing equipment. A program plan to systematically develop and apply the tools for power processing systems modeling and analysis is presented so that meaningful results can be obtained each year to aid the power processing system engineer and power processing equipment circuit designers in their conceptual and detail design and analysis tasks

Advanced control methods on three-phase inverters in distributed energy resources

“This research is an endeavor to apply new and well-established control methodologies to improve transient response, stability and reliability of three-phase inverters in grid-connected and isolated mode of operation. In the course of studying the effect of these methodologies, model-based control is introduced and is extensively applied which is relatively a new approach. In addition, the application of this concept has been studied on developing “grid-forming” controls to allow wind and solar inverters to support voltage and frequency levels like traditional generators. This research encloses the details of three major works of this research and their possible contributions on improving the performance of three-phase inverters in gridconnected and isolated mode of operation. The first one employs the concept of adaptive control using multiple models and a hierarchical control approach to smoothly switch between isolated and grid-connected modes of operation. In the second work, the features of the first research work have been applied and more nourished to control a grid-forming unit. The interactions of this grid-supporting converter with a grid- forming unit is the main subject of discussion in this work. The last work applies the concept of internal-model control to introduce a new control methodology in power-synchronization method. This approach has tackled the non-minimum phase issue attributed to power-synchronization methodology and offers a robust solution. Furthermore, in this research, detailed stability analysis of all the proposed control structures have been presented. Along with all simulation verification, FPGA-Based Hardware-in-the-Loop (HIL) has been utilized to verify the performance of the discrete control structure. The details of plant modeling, controller design, HIL and experimental results are presented for all of the proposed schemes in each section”--Abstract, page iv

Analysis, Design and Control of a Modular Full-Si Converter Concept for Electric Vehicle Ultra-Fast Charging

L'abstract è presente nell'allegato / the abstract is in the attachmen

Current-limiting three-phase rectifiers

In this paper, a nonlinear controller is proposed for a three-phase rectifier so that its input current does not exceed a given limit. At the same time, the proposed controller can achieve accurate dc output voltage regulation and reactive power control independently from system parameters including the load during the normal operation. Using the generic dq transformation and the nonlinear model of the rectifier, the boundedness and the current-limiting property of the closed-loop system are proven using Lyapunov methods and the input-to-state stability theory. Moreover, an analytic framework for selecting the controller parameters is presented and the current limitation is proven for both the cases with L and LCL filters at the input of the rectifier. Different from existing approaches, the current-limiting property is achieved without external limiters, monitoring devices, or switches and is incorporated in the control dynamics, independently from the type of the load (linear or nonlinear). Extensive real-time simulation results are provided to verify the effectiveness of the proposed strategy

Modeling and Control of Single Phase Grid-Tie Converters

The penetration of renewable energy into the electric utility grid is growing worldwide. At the heart of these renewable sources is the power electronic systems used to convert the renewable source to an output that can be connected to the grid. In recent years, there has been a great deal of work in designing converters for grid-tie applications and is continuing to grow. With recent smart grid activities, it is not likely that this work will cease in the short term. Most of the recent research is in ancillary services that the converter can offer in addition to the normal energy transfer. With more advanced converters, the ability to provide reactive power and harmonic compensation has triggered many researchers to look at more advanced control schemes. The work in this thesis focuses on modeling and control of single phase grid connected converters with an emphasis on grid interactions and ancillary services. While there has been a great deal of work in the modeling and control area for general converter operation, there has been little analysis in the converter’s response to grid disturbances. There are very few resources that discuss the controller design as it relates to power quality. However, these are issues that must be considered in a real design and what separates the research and commercial level converters. In addition to control and modeling work, the author suggests two new transformerless converter topologies for photovoltaic applications. In general, these converters can be viewed as a hybrid converter topology comprised of a two level and multi-level structure. Both converters show conducted emissions improvements over the standard commercial transformerless converters while also meeting leakage current requirements

Modeling and Analysis of Power Processing Systems (MAPPS), initial phase 2

The overall objective of the program is to provide the engineering tools to reduce the analysis, design, and development effort, and thus the cost, in achieving the required performances for switching regulators and dc-dc converter systems. The program was both tutorial and application oriented. Various analytical methods were described in detail and supplemented with examples, and those with standardization appeals were reduced into computer-based subprograms. Major program efforts included those concerning small and large signal control-dependent performance analysis and simulation, control circuit design, power circuit design and optimization, system configuration study, and system performance simulation. Techniques including discrete time domain, conventional frequency domain, Lagrange multiplier, nonlinear programming, and control design synthesis were employed in these efforts. To enhance interactive conversation between the modeling and analysis subprograms and the user, a working prototype of the Data Management Program was also developed to facilitate expansion as future subprogram capabilities increase