Portability, compatibility and reuse of MAC protocols across different IoT radio platforms

To cope with the diversity of Internet of Things (loT) requirements, a large number of Medium Access Control (MAC) protocols have been proposed in scientific literature, many of which are designed for specific application domains. However, for most of these MAC protocols, no multi-platform software implementation is available. In fact, the path from conceptual MAC protocol proposed in theoretical papers, towards an actual working implementation is rife with pitfalls. (i) A first problem is the timing bugs, frequently encountered in MAC implementations. (ii) Furthermore, once implemented, many MAC protocols are strongly optimized for specific hardware, thereby limiting the potential of software reuse or modifications. (iii) Finally, in real-life conditions, the performance of the MAC protocol varies strongly depending on the actual underlying radio chip. As a result, the same MAC protocol implementation acts differently per platform, resulting in unpredictable/asymmetrical behavior when multiple platforms are combined in the same network. This paper describes in detail the challenges related to multi-platform MAC development, and experimentally quantifies how the above issues impact the MAC protocol performance when running MAC protocols on multiple radio chips. Finally, an overall methodology is proposed to avoid the previously mentioned cross-platform compatibility issues. (C) 2018 Elsevier B.V. All rights reserved

TCP for Wireless Environments

Computer networks have experienced an explosive growth over the past few years, which has lead to some severe congestion problems. Reliable protocols like TCP works well in wired networks where loss occurs mostly because of congestion. However, in wireless networks, loss occurs because of bit rates and handoffs too. TCP responds all losses by congestion control and avoidance algorithms, which results in degradation of TCP\u27s End-To-End performance in wireless networks. This paper discusses different issues and problems regarding use of TCP in wireless networks and provides comprehensive survey of various schemes to improve performance of TCP in Wireless Networks

Different Transmission Control Protocol Variants in Wireless Environments

Computer networks have experienced an explosive growth over the past few years, which has lead to some severe congestion problems. Reliable protocols like TCP works well in wired networks where loss occurs mostly because of congestion. However, in wireless networks, loss occurs because of bit rates and handoffs too. TCP responds all losses by congestion control and avoidance algorithms, which results in degradation of TCP’s End-To-End performance in wireless networks. This paper discusses different issues and problems regarding use of TCP in wireless networks and provides comprehensive survey of various schemes to improve performance of TCP in Wireless Networks

Priority Based Buffering over Multiple Lossy Links Using TCP Aware Layer Buffering

Wireless military information systems require high reliability, which is difficult to achieve in adverse conditions. To provide high reliability, one must overcome packet loss across multiple wireless hops. Buffering packets in a lossy environment is well explored; however, the ability to selectively buffer TCP traffic across multiple lossy links is a new area of research. This document seeks to explore the delivery of high priority traffic in a lossy environment and conclude that prioritized buffing can increase the probability that a high priority download will finish, where others will fail. It is shown that buffering provides six times the throughput in a network with each link experiencing 25% loss. Prioritizing TCP packet flows provides a varied outcome, as it cannot overcome the TCP mechanisms, when the packet loss recovery time is greater than the retransmission timeout event. However, the future work in chapter 6 may provide roadmap to gaining control authority of the challenged network

Performance Modelling and Optimisation of Multi-hop Networks

A major challenge in the design of large-scale networks is to predict and optimise the total time and energy consumption required to deliver a packet from a source node to a destination node. Examples of such complex networks include wireless ad hoc and sensor networks which need to deal with the effects of node mobility, routing inaccuracies, higher packet loss rates, limited or time-varying effective bandwidth, energy constraints, and the computational limitations of the nodes. They also include more reliable communication environments, such as wired networks, that are susceptible to random failures, security threats and malicious behaviours which compromise their quality of service (QoS) guarantees. In such networks, packets traverse a number of hops that cannot be determined in advance and encounter non-homogeneous network conditions that have been largely ignored in the literature. This thesis examines analytical properties of packet travel in large networks and investigates the implications of some packet coding techniques on both QoS and resource utilisation. Specifically, we use a mixed jump and diffusion model to represent packet traversal through large networks. The model accounts for network non-homogeneity regarding routing and the loss rate that a packet experiences as it passes successive segments of a source to destination route. A mixed analytical-numerical method is developed to compute the average packet travel time and the energy it consumes. The model is able to capture the effects of increased loss rate in areas remote from the source and destination, variable rate of advancement towards destination over the route, as well as of defending against malicious packets within a certain distance from the destination. We then consider sending multiple coded packets that follow independent paths to the destination node so as to mitigate the effects of losses and routing inaccuracies. We study a homogeneous medium and obtain the time-dependent properties of the packet’s travel process, allowing us to compare the merits and limitations of coding, both in terms of delivery times and energy efficiency. Finally, we propose models that can assist in the analysis and optimisation of the performance of inter-flow network coding (NC). We analyse two queueing models for a router that carries out NC, in addition to its standard packet routing function. The approach is extended to the study of multiple hops, which leads to an optimisation problem that characterises the optimal time that packets should be held back in a router, waiting for coding opportunities to arise, so that the total packet end-to-end delay is minimised

A Trust Based Fuzzy Algorithm for Congestion Control in Wireless Multimedia Sensor Networks (TFCC)

Network congestion has become a critical issue for resource constrained Wireless Sensor Networks (WSNs), especially for Wireless Multimedia Sensor Networks (WMSNs)where large volume of multimedia data is transmitted through the network. If the traffic load is greater than the available capacity of the sensor network, congestion occurs and it causes buffer overflow, packet drop, deterioration of network throughput and quality of service (QoS). Again, the faulty nodes of the network also aggravate congestion by diffusing useless packets or retransmitting the same packet several times. This results in the wastage of energy and decrease in network lifetime. To address this challenge, a new congestion control algorithm is proposed in which the faulty nodes are identified and blocked from data communication by using the concept of trust. The trust metric of all the nodes in the WMSN is derived by using a two-stage Fuzzy inferencing scheme. The traffic flow from source to sink is optimized by implementing the Link State Routing Protocol. The congestion of the sensor nodes is controlled by regulating the rate of traffic flow on the basis of the priority of the traffic. Finally we compare our protocol with other existing congestion control protocols to show the merit of the work.Comment: 6 pages, 5 figures, conference pape

CoAP congestion control for the Internet of Things

“© © 2017 IEEE. Personal use of this material is permitted. Permission from IEEE must be obtained for all other uses, in any current or future media, including reprinting/republishing this material for advertising or promotional purposes, creating new collective works, for resale or redistribution to servers or lists, or reuse of any copyrighted component of this work in other works.” August Betzler, Javier Isern, Carles Gomez, Ilker Demirkol, Josep Paradells, "Experimental evaluation of congestion control for CoAP communications without end-to-end reliability", Ad Hoc Networks, pp. , 2016, ISSN 15708705. DOI: 10.1109/MCOM.2016.7509394CoAP is a lightweight RESTful application layer protocol devised for the IoT. Operating on top of UDP, CoAP must handle congestion control by itself. The core CoAP specification defines a basic congestion control mechanism, but it is not capable of adapting to network conditions. However, IoT scenarios exhibit significant resource constraints, which pose new challenges on the design of congestion control mechanisms. In this article we present CoCoA, an advanced congestion control mechanism for CoAP being standardized by the Internet Engineering Task Force CoRE working group. CoCoA introduces a novel round-trip time estimation technique, together with a variable backoff factor and aging mechanisms in order to provide dynamic and controlled retransmission timeout adaptation suitable for the peculiarities of IoT communications. We conduct a comparative performance analysis of CoCoA and a variety of alternative algorithms including state-of-the-art mechanisms developed for TCP. The study is based on experiments carried out in real testbeds. Results show that, in contrast to the alternative methods considered, CoCoA consistently outperforms the default CoAP congestion control mechanism in all evaluated scenarios.Peer ReviewedPostprint (author's final draft

Towards efficient coexistence of IEEE 802.15.4e TSCH and IEEE 802.11

A major challenge in wide deployment of smart wireless devices, using different technologies and sharing the same 2.4 GHz spectrum, is to achieve coexistence across multiple technologies. The IEEE~802.11 (WLAN) and the IEEE 802.15.4e TSCH (WSN) where designed with different goals in mind and both play important roles for respective applications. However, they cause mutual interference and degraded performance while operating in the same space. To improve this situation we propose an approach to enable a cooperative control which type of network is transmitting at given time, frequency and place. We recognize that TSCH based sensor network is expected to occupy only small share of time, and that the nodes are by design tightly synchronized. We develop mechanism enabling over-the-air synchronization of the Wi-Fi network to the TSCH based sensor network. Finally, we show that Wi-Fi network can avoid transmitting in the "collision periods". We provide full design and show prototype implementation based on the Commercial off-the-shelf (COTS) devices. Our solution does not require changes in any of the standards.Comment: 8 page