Adapting to climate risks and extreme weather: guide for mining - minerals industry professionals

AbstractExtreme weather events in Australia over recent years have highlighted the costs for Australian mining and mineral processing operations of being under-prepared for adapting to climate risk. For example, the 2010/2011 Queensland floods closed or restricted production of about forty out of Queensland’s fifty coal mines costing more than $2 billion in lost production.Whilst mining and mineral professionals have experience with risk management and managing workplace health and safety, changes to patterns of extreme weather events and future climate impacts are unpredictable. Responding to these challenges requires planning and preparation for events that many people have never experienced before. With increasing investor and public concern for the impact of such events, this guide is aimed at assisting a wide range of mining and mineral industry professionals to incorporate planning and management of extreme weather events and impacts from climate change into pre-development, development and construction, mining and processing operations and post-mining phases. The guide should be read in conjunction with the research  final report which describes the research process for developing the guide and reflects on challenges and lessons for adaptation research from the project.The Institute for Sustainable Futures, University of Technology Sydney (UTS) led the development of the guide with input from the Centre for Mined Land Rehabilitation, University of Queensland and a Steering Committee from the Australasian Institute of Mining and Metallurgy’s Sustainability Committee and individual AusIMM members, who volunteered their time and experience. As the situation of every mining and mineral production operation is going to be different, this guide has been designed to provide general information about the nature of extreme weather events, and some specific examples of how unexpectedly severe flooding, storm, drought, high temperature and bushfire events have affected mining and mineral processing operations. A number of case studies used throughout the guide also illustrate the ways forward thinking operations have tackled dramatically changing climatic conditions.Each section of the guide outlines a range of direct and indirect impacts from a different type of extreme weather, and provides a starting point for identifying potential risks and adaptation options that can be applied in different situations. The impacts and adaptation sections provide guidance on putting the key steps into practice by detailing specific case examples of leading practice and how a risk management approach can be linked to adaptive planning. More information about specific aspects of extreme weather, planning and preparation for the risks presented by these events, and tools for undertaking climate related adaptation is provided in the ‘Additional Resources’ section

Feasibility study on manganese nodules recovery in the Clarion-Clipperton Zone

The sea occupies three quarters of the area on the earth and provides various kinds of resources to mankind in the form of minerals, food, medicines and even energy. “Seabed exploitation” specifically deals with recovery of the resources that are found on the seabed, in the form of solids, liquids and gasses (methane hydrates, oil and natural gas). The resources are abundant; nevertheless the recovery process from the seabed, poses various challenges to mankind. This study starts with a review on three types of resources: polymetallic manganese nodules, polymetallic manganese crusts and massive sulphides deposits. Each of them are rich in minerals, such as manganese, cobalt, nickel, copper and some rare earth elements. They are found at many locations in the deep seas and are potentially a big source of minerals. No commercial seabed mining activity has been accomplished to date due to the great complexities in recovery. This book describes the various challenges associated with a potential underwater mineral recovery operation, reviews and analyses the existing recovery techniques, and provides an innovative engineering system. It further identifies the associated risks and a suitable business model.Chapter 1 presents a brief background about the past and present industrial trends of seabed mining. A description of the sea, seabed and the three types of seabed mineral resources are also included. A section on motivations for deep sea mining follows which also compares the latter with terrestrial mining.Chapter 2 deals with the decision making process, including a market analysis, for selecting manganese nodules as the resource of interest. This is followed by a case study specific to the location of interest: West COMRA in the Clarion-Clipperton Zone. Specific site location is determined in order to estimate commercial risk, environmental impact assessment and logistic challenge.Chapter 3 lists the existing techniques for nodule recovery operation. The study identifies the main components of a nodules recovery system, and organizes them into: collector, propulsion and vertical transport systems.Chapter 4 discusses various challenges posed by manganese nodules recovery, in terms of the engineering and environment. The geo-political and legal-social issues have also been considered. This chapter plays an important role in defining the proposed engineering system, as addressing the identified challenges will better shape the proposed solution.Chapter 5 proposes an engineering system, by considering the key components in greater details. An innovative component, the black box is introduced, which is intended to be an environmentally-friendly solution for manganese nodules recovery. Other auxiliary components, such as the mother ship and metallurgical processing, are briefly included. A brief power supply analysis is also provided.Chapter 6 assesses the associated risks, which are divided into sections namely commercial viability, logistic challenges, environmental impact assessment and safety assessment. The feasibility of the proposed solution is also dealt with.Chapter 7 provides a business model for the proposed engineering system. Potential customers are identified, value proposition is determined, costumer relation is also suggested. Public awareness is then discussed and finally a SWOT analysis is presented. This business model serves as an important bridge to reach both industry and research institutes.Finally, Chapter 8 provides some conclusions and recommendation for future work

Reactive control and reasoning assistance for scientific laboratory instruments

Scientific laboratory instruments that are involved in chemical or physical sample identification frequently require substantial human preparation, attention, and interactive control during their operation. Successful real-time analysis of incoming data that supports such interactive control requires: (1) a clear recognition of variance of the data from expected results; and (2) rapid diagnosis of possible alternative hypotheses which might explain the variance. Such analysis then aids in decisions about modifying the experiment protocol, as well as being a goal itself. This paper reports on a collaborative project at the NASA Ames Research Center between artificial intelligence researchers and planetary microbial ecologists. Our team is currently engaged in developing software that autonomously controls science laboratory instruments and that provides data analysis of the real-time data in support of dynamic refinement of the experiment control. the first two instruments to which this technology has been applied are a differential thermal analyzer (DTA) and a gas chromatograph (GC). coupled together, they form a new geochemicstry and microbial analysis tool that is capable of rapid identification of the organiz and mineralogical constituents in soils. The thermal decomposition of the minerals and organics, and the attendance release of evolved gases, provides data about the structural and molecular chemistry of the soil samples

Real options and investment under uncertainty: What do we know?

No abstract available for this paper.

Risk assessment of blasting operations in open pit mines using FAHP method

Purpose. In the mining blasting operation, fragmentation is the most important output. Fly rock, ground vibration, air blast, and environmental effects are detrimental effects of blasting operations. Identifying and ranking the risk of blasting operations is considered as the most important stage in project management. Methods. In this research, the problem of identifying and ranking the factors constituting the risk in blasting operations is considered with the methodology of the Fuzzy Analytical Hierarchy Process (FAHP). Criteria and sub-criteria have been determined based on historical research studies, field studies, and expert opinions for designing a hierarchical process. Findings. Based on FAHP scores, non-control of the sub-criterion of health and safety (C3), blast operation results (C18) and knowledge, and skill and staffing (C2) with a score of 0.377, 0.334, and 0.294 respectively are the most effective sub-criterion for the creation of blasting operations risk. According to the score, the sub-criterion C18 is the most effective sub-criterion in providing the blasting operations risk. Effects and results of blasting operations (D8), with a score of 0.334 as the most effective criterion, and natural hazards (D10), with a score of 0.015, were the last priorities in the factors causing blasting operations risk. Originality. Regarding the risk rating of blasting operations, the control of the sub-criteria C3, C18, and C2, and the D8 criterion, is of particular importance in reducing the risk of blasting operations and improving project management. Practical implications. The evaluation of human resource performance and increase in the level of knowledge and skills and occupational safety and control of all outputs of blasting operations is necessary. Therefore, selecting the most important project risks and taking actions to remove them is essential for risk management.Мета. Визначення ризиків проведення вибухових робіт та їх оцінка на основі використанням нечіткого методу аналізу ієрархій (НМАІ) для покращення управління якістю проектів. Методика. В рамках даного дослідження, проблеми визначення та оцінки ризиків вибухових робіт розглядалися із застосуванням нечіткого методу аналізу ієрархій. На базі аналізу історичних даних і польового дослідження з урахуванням експертних оцінок були визначені критерії та підкритерії для побудови ієрархій. Результати. За результатами НМАІ, неконтролюючий підкритерій здоров’я та безпеки (С3), підкритерій результатів вибухових робіт (С18), знань, умінь і кадрів (С2) зі значеннями 0.377, 0.334 і 0.294 відповідно найбільш ефективні в появі ризику проведення вибухових робіт. Підкритерій С18 чинить найбільший вплив на ризик проведення вибухових робіт. Критерій результатів і наслідків вибухових робіт (D8) з найефективнішим значенням 0.334 та критерій природних катастроф (D10) зі значенням 0.015 є останніми пріоритетами серед чинників, які визначають ризик проведення вибухових робіт. Наукова новизна. Отримав доповнення та подальший розвиток науково-методичний підхід до визначення ризиків при проведенні вибухових робіт, заснований на їх ранжуванні з використанням системи виявлених критеріїв і підкритеріїв методом НМАІ. Практична значимість. Для успішного керування проектом важливо визначати найсерйозніші ризики проекту й вжити заходів щодо їх усунення. Відносно ранжирування ризиків проведення вибухових робіт управління підкритеріями C3, C18 і C2, а також критерієм D8, особливо важливо для зниження цих ризиків та покращення якості управління проектом.Цель. Определение рисков проведения взрывных работ и их оценка на основе использования нечеткого метода анализа иерархий (НМАИ) для улучшения управления качеством проектов. Методика. В рамках данного исследования, проблемы определения и оценки рисков взрывных работ рассматривались с применением нечеткого метода анализа иерархий. На базе анализа исторических данных и полевого исследования с учетом экспертных оценок были определены, критерии и подкритерии для построения иерархий. Результаты. По результатам НМАИ, неконтролирующий подкритерий здоровья и безопасности (С3), подкритерий результатов взрывных работ (С18), знаний, умений и кадров (С2) со значениями 0.377, 0.334 и 0.294 соответственно наиболее эффективны в появлении риска проведения взрывных работ. Подкритерий С18 оказывает самое большое влияние на риск проведения взрывных работ. Критерий результатов и последствий взрывных работ (D8) с самым эффективным значением 0.334 и критерий природных катастроф (D10) со значением 0.015 являются последними приоритетами среди факторов, которые определяют риск проведения взрывных работ. Научная новизна. Получил дополнение и дальнейшее развитие научно-методический подход к определению рисков при проведении взрывных работ, основанный на их ранжировании с использованием системы выявленных критериев и подкритериев методом НМАИ. Практическая значимость. Для успешного руководства проектом важно определять самые серьезные риски проекта и предпринять действия по их устранению. В отношении ранжирования рисков проведения взрывных работ управление подкритериями C3, C18 и C2, а также критерием D8, особенно важно для снижения этих рисков и улучшения руководства проектом.The authors would like to thank Mining Engineering Department, Islamic Azad University (South Tehran Branch) for supporting this research

Unconventional gas: potential energy market impacts in the European Union

In the interest of effective policymaking, this report seeks to clarify certain controversies and identify key gaps in the evidence-base relating to unconventional gas. The scope of this report is restricted to the economic impact of unconventional gas on energy markets. As such, it principally addresses such issues as the energy mix, energy prices, supplies, consumption, and trade flows. Whilst this study touches on coal bed methane and tight gas, its predominant focus is on shale gas, which the evidence at this time suggests will be the form of unconventional gas with the most growth potential in the short- to medium-term. This report considers the prospects for the indigenous production of shale gas within the EU-27 Member States. It evaluates the available evidence on resource size, extractive technology, resource access and market access. This report also considers the implications for the EU of large-scale unconventional gas production in other parts of the world. This acknowledges the fact that many changes in the dynamics of energy supply can only be understood in the broader global context. It also acknowledges that the EU is a major importer of energy, and that it is therefore heavily affected by developments in global energy markets that are largely out of its control.JRC.F.3-Energy securit

Development of an analytical model for the extraction of manganese from marine nodules

Multivariable analytical models provide a descriptive (albeit approximate) mathematical relationship between a set of independent variables and one or more dependent variables. The current work develops an analytical model that extends a design of experiments for the leaching of manganese from marine nodules, using sulfuric acid (H2SO4) in the presence of iron-containing tailings, which are both by-products of conventional copper extraction. The experiments are configured to address the effect of time, particle size, acid concentration, Fe2O3/MnO2 ratio, stirring speed and temperature, under typical industrial conditions. The recovery of manganese has been modeled using a first order differential equation that accurately fits experimental results, noting that Fe2O3/MnO2 and temperature are the most critical independent variables, while the particle size is the least influential (under typical conditions). This study obtains representative fitting parameters, that can be used to explore the incorporation of Mn recovery from marine nodules, as part of the extended value chain of copper sulfide processing.The authors are grateful for the contribution of the Scientific Equipment Unit- MAINI of the Universidad Católica del Norte for aiding in generating data by automated electronic microscopy QEMSCAN®, and for facilitating the chemical analysis of the solutions. We are also grateful to the Altonorte Mining Company for supporting this research and providing slag for this study, and we thank Marina Vargas Aleuy, María Barraza Bustos and Carolina Ossandón Cortés of the Universidad Católica del Norte for supporting the experimental tests

Expert-based development of a standard in CO2 sequestration monitoring technology

Bureau of Economic Geolog

Sustainable seabed mining: guidelines and a new concept for Atlantis II Deep

The feasibility of exploiting seabed resources is subject to the engineering solutions, and economic prospects. Due to rising metal prices, predicted mineral scarcities and unequal allocations of resources in the world, vast research programmes on the exploration and exploitation of seabed minerals are presented in 1970s. Very few studies have been published after the 1980s, when predictions were not fulfilled. The attention grew back in the last decade with marine mineral mining being in research and commercial focus again and the first seabed mining license for massive sulphides being granted in Papua New Guinea’s Exclusive Economic Zone.Research on seabed exploitation and seabed mining is a complex transdisciplinary field that demands for further attention and development. Since the field links engineering, economics, environmental, legal and supply chain research, it demands for research from a systems point of view. This implies the application of a holistic sustainability framework of to analyse the feasibility of engineering systems. The research at hand aims to close this gap by developing such a framework and providing a review of seabed resources. Based on this review it identifies a significant potential for massive sulphides in inactive hydrothermal vents and sediments to solve global resource scarcities. The research aims to provide background on seabed exploitation and to apply a holistic systems engineering approach to develop general guidelines for sustainable seabed mining of polymetallic sulphides and a new concept and solutions for the Atlantis II Deep deposit in the Red Sea.The research methodology will start with acquiring a broader academic and industrial view on sustainable seabed mining through an online survey and expert interviews on seabed mining. In addition, the Nautilus Minerals case is reviewed for lessons learned and identification of challenges. Thereafter, a new concept for Atlantis II Deep is developed that based on a site specific assessment.The research undertaken in this study provides a new perspective regarding sustainable seabed mining. The main contributions of this research are the development of extensive guidelines for key issues in sustainable seabed mining as well as a new concept for seabed mining involving engineering systems, environmental risk mitigation, economic feasibility, logistics and legal aspects

Knowledge Communication in Product Development Projects

During the last decades, a number of studies have been concerned with com-munication related to new product development. These have looked at either intra-organizational communication between departments or communication between new product development teams and external stakeholders such as customers or suppliers. Only little research, however, has combined internal and external stakeholder communication and explored the role of technology uncertainty on communication. The purpose of this study is to examine how technology uncertainty affects project manager communication behavior during new product development. We carried out an embedded case study of a major NPD project in the automation industry. The findings indicate that technology uncertainty is positively related to communication frequency between project manager and project stakeholders during the early phase of NPD project. In addition we found a negative association between technology uncertainty and the breadth and depth of communication between project manager and stakeholders in early phase of the NPD project. These findings indicate that under high technology uncertainty, managers of NPD projects modify their communication behavior not only with respect to how frequently they communicate with stakeholders, but also to which stakeholders they communicate and how deeply they engage different stakeholders in different phases of the new product development project.