26,026 research outputs found
Knowledge and tasks representation for an industrial robotic application
The paper presents an implementation of knowledge representation and task representation, based on ontologies for an Industrial Robotic Application. The industrial application is to insert up to 56 small pins, e.g., sealants, in a harness box terminal for the automotive industry. The number of sealants and their insertion pattern vary significantly with the production requests. Based on the knowledge representation of the robot and also based on the tasks to be performed, plans are built and then sent to the robot controller based on the seal pattern production order. Moreover, the robotic system is capable to perform re-planning when an insertion error is reported by a machine vision system. The ontology-based approach was used to define the robot, the machine vision system, and the tasks that were needed to be performed by the robotic system. The robotic system was validated experimentally by showing its capability to correct seal insertion errors, while re-planning.info:eu-repo/semantics/publishedVersio
Internet of robotic things : converging sensing/actuating, hypoconnectivity, artificial intelligence and IoT Platforms
The Internet of Things (IoT) concept is evolving rapidly and influencing newdevelopments in various application domains, such as the Internet of MobileThings (IoMT), Autonomous Internet of Things (A-IoT), Autonomous Systemof Things (ASoT), Internet of Autonomous Things (IoAT), Internetof Things Clouds (IoT-C) and the Internet of Robotic Things (IoRT) etc.that are progressing/advancing by using IoT technology. The IoT influencerepresents new development and deployment challenges in different areassuch as seamless platform integration, context based cognitive network integration,new mobile sensor/actuator network paradigms, things identification(addressing, naming in IoT) and dynamic things discoverability and manyothers. The IoRT represents new convergence challenges and their need to be addressed, in one side the programmability and the communication ofmultiple heterogeneous mobile/autonomous/robotic things for cooperating,their coordination, configuration, exchange of information, security, safetyand protection. Developments in IoT heterogeneous parallel processing/communication and dynamic systems based on parallelism and concurrencyrequire new ideas for integrating the intelligent “devices”, collaborativerobots (COBOTS), into IoT applications. Dynamic maintainability, selfhealing,self-repair of resources, changing resource state, (re-) configurationand context based IoT systems for service implementation and integrationwith IoT network service composition are of paramount importance whennew “cognitive devices” are becoming active participants in IoT applications.This chapter aims to be an overview of the IoRT concept, technologies,architectures and applications and to provide a comprehensive coverage offuture challenges, developments and applications
A Model-Driven Engineering Approach for ROS using Ontological Semantics
This paper presents a novel ontology-driven software engineering approach for
the development of industrial robotics control software. It introduces the
ReApp architecture that synthesizes model-driven engineering with semantic
technologies to facilitate the development and reuse of ROS-based components
and applications. In ReApp, we show how different ontological classification
systems for hardware, software, and capabilities help developers in discovering
suitable software components for their tasks and in applying them correctly.
The proposed model-driven tooling enables developers to work at higher
abstraction levels and fosters automatic code generation. It is underpinned by
ontologies to minimize discontinuities in the development workflow, with an
integrated development environment presenting a seamless interface to the user.
First results show the viability and synergy of the selected approach when
searching for or developing software with reuse in mind.Comment: Presented at DSLRob 2015 (arXiv:1601.00877), Stefan Zander, Georg
Heppner, Georg Neugschwandtner, Ramez Awad, Marc Essinger and Nadia Ahmed: A
Model-Driven Engineering Approach for ROS using Ontological Semantic
Automatic inspection of analog and digital meters in a robot vision system
A critical limitation of most of the robots utilized in industrial environments arises due to their inability to utilize sensory feedback. This forces robot operation into totally preprogrammed or teleoperation modes. In order to endow the new generation of robots with higher levels of autonomy techniques for sensing of their work environments and for accurate and efficient analysis of the sensory data must be developed. In this paper detailed development of vision system modules for inspecting various types of meters, both analog and digital, encountered in a robotic inspection and manipulation tasks are described. These modules are tested using industrial robots having multisensory input capability
Reducing the Barrier to Entry of Complex Robotic Software: a MoveIt! Case Study
Developing robot agnostic software frameworks involves synthesizing the
disparate fields of robotic theory and software engineering while
simultaneously accounting for a large variability in hardware designs and
control paradigms. As the capabilities of robotic software frameworks increase,
the setup difficulty and learning curve for new users also increase. If the
entry barriers for configuring and using the software on robots is too high,
even the most powerful of frameworks are useless. A growing need exists in
robotic software engineering to aid users in getting started with, and
customizing, the software framework as necessary for particular robotic
applications. In this paper a case study is presented for the best practices
found for lowering the barrier of entry in the MoveIt! framework, an
open-source tool for mobile manipulation in ROS, that allows users to 1)
quickly get basic motion planning functionality with minimal initial setup, 2)
automate its configuration and optimization, and 3) easily customize its
components. A graphical interface that assists the user in configuring MoveIt!
is the cornerstone of our approach, coupled with the use of an existing
standardized robot model for input, automatically generated robot-specific
configuration files, and a plugin-based architecture for extensibility. These
best practices are summarized into a set of barrier to entry design principles
applicable to other robotic software. The approaches for lowering the entry
barrier are evaluated by usage statistics, a user survey, and compared against
our design objectives for their effectiveness to users
NASA Center for Intelligent Robotic Systems for Space Exploration
NASA's program for the civilian exploration of space is a challenge to scientists and engineers to help maintain and further develop the United States' position of leadership in a focused sphere of space activity. Such an ambitious plan requires the contribution and further development of many scientific and technological fields. One research area essential for the success of these space exploration programs is Intelligent Robotic Systems. These systems represent a class of autonomous and semi-autonomous machines that can perform human-like functions with or without human interaction. They are fundamental for activities too hazardous for humans or too distant or complex for remote telemanipulation. To meet this challenge, Rensselaer Polytechnic Institute (RPI) has established an Engineering Research Center for Intelligent Robotic Systems for Space Exploration (CIRSSE). The Center was created with a five year $5.5 million grant from NASA submitted by a team of the Robotics and Automation Laboratories. The Robotics and Automation Laboratories of RPI are the result of the merger of the Robotics and Automation Laboratory of the Department of Electrical, Computer, and Systems Engineering (ECSE) and the Research Laboratory for Kinematics and Robotic Mechanisms of the Department of Mechanical Engineering, Aeronautical Engineering, and Mechanics (ME,AE,&M), in 1987. This report is an examination of the activities that are centered at CIRSSE
- …