High Speed and Low Power Pseudo Noise(PN) Sequence Generator

The Pseudo Noise (PN) sequence has become a significant component in digital communication. A pseudo random code are generated using two techniques namely, gold code and Kasami code. The generation of PN sequence involves the use of Linear Feedback Shift Register (LFSR) as its building block. When compared to other multiplexing methods,gold code and Kasami code techniques are better in terms of power utilization, noise flexibility and frequency efficiency. The generation of these codes involves the use of two maximum length sequence (M-sequence). The auto-correlation properties of gold and Kasami sequences are the basis for this research work. The software used to simulate these methods is NC Launchand the language used is Verilog Hardware Description Language(HDL). The results of the above two methods are compared in terms of power utilization and speed in the CADENCE environment. When comparing Gold code with Kasami code, Gold code consumes 42% less power than the Kasami code. In the modified Kasami code generator, the speed is increased by 8%, when compared to modified Gold code generator

An Assessment of Indoor Geolocation Systems

Currently there is a need to design, develop, and deploy autonomous and portable indoor geolocation systems to fulfil the needs of military, civilian, governmental and commercial customers where GPS and GLONASS signals are not available due to the limitations of both GPS and GLONASS signal structure designs. The goal of this dissertation is (1) to introduce geolocation systems; (2) to classify the state of the art geolocation systems; (3) to identify the issues with the state of the art indoor geolocation systems; and (4) to propose and assess four WPI indoor geolocation systems. It is assessed that the current GPS and GLONASS signal structures are inadequate to overcome two main design concerns; namely, (1) the near-far effect and (2) the multipath effect. We propose four WPI indoor geolocation systems as an alternative solution to near-far and multipath effects. The WPI indoor geolocation systems are (1) a DSSS/CDMA indoor geolocation system, (2) a DSSS/CDMA/FDMA indoor geolocation system, (3) a DSSS/OFDM/CDMA/FDMA indoor geolocation system, and (4) an OFDM/FDMA indoor geolocation system. Each system is researched, discussed, and analyzed based on its principle of operation, its transmitter, the indoor channel, and its receiver design and issues associated with obtaining an observable to achieve indoor navigation. Our assessment of these systems concludes the following. First, a DSSS/CDMA indoor geolocation system is inadequate to neither overcome the near-far effect not mitigate cross-channel interference due to the multipath. Second, a DSSS/CDMA/FDMA indoor geolocation system is a potential candidate for indoor positioning, with data rate up to 3.2 KBPS, pseudorange error, less than to 2 m and phase error less than 5 mm. Third, a DSSS/OFDM/CDMA/FDMA indoor geolocation system is a potential candidate to achieve similar or better navigation accuracy than a DSSS/CDMA indoor geolocation system and data rate up to 5 MBPS. Fourth, an OFDM/FDMA indoor geolocation system is another potential candidate with a totally different signal structure than the pervious three WPI indoor geolocation systems, but with similar pseudorange error performance

Chip and Signature Interleaving in DS CDMA Systems

Siirretty Doriast

DS-UWB and TH-UWB Energy Consumption Comparison, Journal of Telecommunications and Information Technology, 2016, nr 1

The energy consumption of the wireless communication systems is starting to be unaffordable. One way to improve the power consumption is the optimization of the communication techniques used by the communication networks and devices. In order to develop an energy efficient UWB multi-user communication system, the choice of modulation and multi access technique is important. This paper compares two Ultra-wideband multi-user techniques, i.e. the DS-UWB and the TH-UWB in the case of the Nakagami-m fading channel. For the DS-UWB technique, the orthogonal (T-OVSF, ZCD) and non-orthogonal (Kasami) codes are used. For TH-UWB, authors consider different modulations (PPM, PSM, PAM). This comparison allows choosing the best solution in terms of energy consumption, data rate and communication range. Two different studies are realized to find the most efficient technique to use. In the first study, the same number of users for the different type of codes (data rate values) is chosen and the total energy consumption for several distances and path-loss coefficient is computed. In the second one, the multiusers effects (same data rate) for various values of distances and path-loss are evaluated

Performance evaluation of wake-up radio based wireless body area network

Abstract. The last decade has been really ambitious in new research and development techniques to reduce energy consumption especially in wireless sensor networks (WSNs). Sensor nodes are usually battery-powered and thus have very limited lifetime. Energy efficiency has been the most important aspect to discuss when talking about wireless body area network (WBAN) in particular, since it is the bottleneck of these networks. Medium access control (MAC) protocols hold the vital position to determine the energy efficiency of a WBAN, which is a key design issue for battery operated sensor nodes. The wake-up radio (WUR) based MAC and physical layer (PHY) have been evaluated in this research work in order to contribute to the energy efficient solutions development. WUR is an on-demand approach in which the node is woken up by the wake-up signal (WUS). A WUS switches a node from sleep mode to wake up mode to start signal transmission and reception. The WUS is transmitted or received by a secondary radio transceiver, which operates on very low power. The energy benefit of using WUR is compared with conventional duty-cycling approach. As the protocol defines the nodes in WUR based network do not waste energy on idle listening and are only awakened when there is a request for communication, therefore, energy consumption is extremely low. The performance of WUR based MAC protocol has been evaluated for both physical layer (PHY) and MAC for transmission of WUS and data. The probabilities of miss detection, false alarm and detection error rates are calculated for PHY and the probabilities of collision and successful data transmission for channel access method Aloha is evaluated. The results are obtained to compute and compare the total energy consumption of WUR based network with duty cycling. The results prove that the WUR based networks have significant potential to improve energy efficiency, in comparison to conventional duty cycling approach especially, in the case of low data-reporting rate applications. The duty cycle approach is better than WUR approach when sufficiently low duty cycle is combined with highly frequent communication between the network nodes

Study and overview on WBAN under IEEE 802.15.6

WBAN (wireless body area networks) is an upcoming technology which stands to be a base for wearable and implantable sensors. The IEEE 802.15.6 formulates the physical and medium access for body area networks. The Body area networks can be implemented in several applications like health monitoring, ambient living environments and consumer electronics. This paper gives a clear overview about the functions of WBAN. The medium access layers and the physical layers of IEEE 802.15.6 are deeply examined and studied in this work. The access mechanisms of the protocol are explained in this paper. A clear literature review has also been stated to know the current state of art of this technology. The future possibilities and area to be explored also has been defined in this work

A survey on acoustic positioning systems for location-based services

Positioning systems have become increasingly popular in the last decade for location-based services, such as navigation, and asset tracking and management. As opposed to outdoor positioning, where the global navigation satellite system became the standard technology, there is no consensus yet for indoor environments despite the availability of different technologies, such as radio frequency, magnetic field, visual light communications, or acoustics. Within these options, acoustics emerged as a promising alternative to obtain high-accuracy low-cost systems. Nevertheless, acoustic signals have to face very demanding propagation conditions, particularly in terms of multipath and Doppler effect. Therefore, even if many acoustic positioning systems have been proposed in the last decades, it remains an active and challenging topic. This article surveys the developed prototypes and commercial systems that have been presented since they first appeared around the 1980s to 2022. We classify these systems into different groups depending on the observable that they use to calculate the user position, such as the time-of-flight, the received signal strength, or the acoustic spectrum. Furthermore, we summarize the main properties of these systems in terms of accuracy, coverage area, and update rate, among others. Finally, we evaluate the limitations of these groups based on the link budget approach, which gives an overview of the system's coverage from parameters such as source and noise level, detection threshold, attenuation, and processing gain.Agencia Estatal de InvestigaciónResearch Council of Norwa

IR-UWB for multiple-access with differential-detection receiver

Impulse-Radio Ultra-Wideband (IR-UWB) emerged as a new wireless technology because of its unique characteristics. Such characteristics are the ability to support rich-multimedia applications over short-ranges, the ability to share the available spectrum among multi-users, and the ability to design less complex transceivers for wireless communication systems functioning based on this technology. In this thesis a novel noncoherent IR-UWB receiver designed to support multiple-access is proposed. The transmitter of the proposed system employs the noncoherent bit-level differential phase-shift keying modulation combined with direct-sequence code division multiple-access. The system is investigated under the effect of the additive white Gaussian noise with multiple-access channel. The receiver implements bit-level differential-detection to recover information bits. Closed-form expression for the average probability of error in the proposed receiver while considering the channel effects is analytically derived. This receiver is compared against another existing coherent receiver in terms of bit error rate performance to confirm its practicality. The proposed receiver is characterized by its simple design requirements and its multiple-access efficiency