157 research outputs found

    Status of grid scale energy storage and strategies for accelerating cost effective deployment

    Get PDF
    Thesis (S.M. in Engineering and Management)--Massachusetts Institute of Technology, System Design and Management Program, 2009.Cataloged from PDF version of thesis.Includes bibliographical references (p. 90-96).The development of emerging grid scale energy storage technologies offers great potential to improve the architecture and operation of the electrical grid. This is especially important in the face of increased reliance on clean, dependable electricity and with the influx of renewable generation and smart grid technology. However, at the present, grid scale energy storage is still in an early, developing stage. This document brings together a broad overview of the sector, including rough revenue estimates for each individually possible application for energy storage, a high level overview including rough cost estimates of each technology and supplier, a more focused look at the actual or possible implementations in the market with rough estimates of the systems' economics in each implementation. Following this is a discussion of notable dynamics and potentially effective strategies, based on current industry conditions and existing academic management frameworks. The investigation was accomplished by leveraging prior research in existing literature, and extending it with first hand discussions with industry leaders and market analysis. It was found that the economics of wholesale load shifting are unattractive for any of the emerging energy storage technologies, but that all of the other higher value implementations considered could be reasonably expected to at least break even financially given proper circumstances and the use of an energy storage technology which suits the implementation well. It was found that lithium ion and zinc-bromine flow batteries are well positioned for near term economically beneficial deployment on the grid.(cont.) Many other technologies exist and are being developed to address these same markets, but are unlikely to be cost effective in the near term. It was also found that government regulation has played and will continue to play a major role in the deployment of energy storage on the grid.by John Kluza.S.M.in Engineering and Managemen

    Energy Management of Distributed Generation Systems

    Get PDF
    The book contains 10 chapters, and it is divided into four sections. The first section includes three chapters, providing an overview of Energy Management of Distributed Systems. It outlines typical concepts, such as Demand-Side Management, Demand Response, Distributed, and Hierarchical Control for Smart Micro-Grids. The second section contains three chapters and presents different control algorithms, software architectures, and simulation tools dedicated to Energy Management Systems. In the third section, the importance and the role of energy storage technology in a Distribution System, describing and comparing different types of energy storage systems, is shown. The fourth section shows how to identify and address potential threats for a Home Energy Management System. Finally, the fifth section discusses about Economical Optimization of Operational Cost for Micro-Grids, pointing out the effect of renewable energy sources, active loads, and energy storage systems on economic operation

    Flexible active power control for PV‐ESS systems:A review

    Get PDF
    The penetration of solar energy in the modern power system is still increasing with a fast growth rate after long development due to reduced environmental impact and ever-decreasing photovoltaic panel cost. Meanwhile, distribution networks have to deal with a huge amount and frequent fluctuations of power due to the intermittent nature of solar energy, which influences the grid stability and could cause a voltage rise in the low-voltage grid. In order to reduce these fluctuations and ensure a stable and reliable power supply, energy storage systems are introduced, as they can absorb or release energy on demand, which provides more control flexibility for PV systems. At present, storage technologies are still under development and integrated in renewable applications, especially in smart grids, where lowering the cost and enhancing the reliability are the main tasks. This study reviews and discusses several active power control strategies for hybrid PV and energy storage systems that deliver ancillary services for grid support. The technological advancements and developments of energy storage systems in grid-tied PV applications are also reviewed

    Batteries and Hydrogen Storage: Technical Analysis and Commercial Revision to Select the Best Option

    Get PDF
    : This paper aims to analyse two energy storage methods—batteries and hydrogen storage technologies—that in some cases are treated as complementary technologies, but in other ones they are considered opposed technologies. A detailed technical description of each technology will allow to understand the evolution of batteries and hydrogen storage technologies: batteries looking for higher energy capacity and lower maintenance, while hydrogen storage technologies pursuing better volumetric and gravimetric densities. Additionally, as energy storage systems, a mathematical model is required to know the state of charge of the system. For this purpose, a mathematical model is proposed for conventional batteries, for compressed hydrogen tanks, for liquid hydrogen storage and for metal hydride tanks, which makes it possible to integrate energy storage systems into management strategies that aim to solve the energy balance in plants based on hybrid energy storage systems. From the technical point of view, most batteries are easier to operate and do not require special operating conditions, while hydrogen storage methods are currently functioning at the two extremes (high temperatures for metal and complex hydrides and low temperatures for liquid hydrogen or physisorption). Additionally, the technical comparison made in this paper also includes research trends and future possibilities in an attempt to help plan future policiesThis research was funded by 1) Spanish Government, grant Ref: PID2020-116616RB-C31, 2) Andalusian Regional Program of R+D+i, grant Ref: P20-00730, and 3) FEDER-University of Huelva 2018, grant Ref: UHU-125931

    Optimal Sizing of a Grid Independent Renewable Heating System for Building Decarbonisation

    Get PDF
    As the use of fossil fuels has led to global climate change due to global warming, most countries are aiming to reduce greenhouse gas emissions through the application of renewable energies. Due to the distributed and seasonal heating demand, the decarbonisation of heating is more challenging, especially for countries that are cold in winters. Electrically powered heat pumps are considered as an attractive solution for decarbonising heating sector. Since grid-powered heat pumps may significantly increase the power demand of the grid, this paper considers using local renewable energy to provide power for heat pumps, which is known as the grid independent renewable heating system including photovoltaic, wind turbine, battery storage system and thermal energy storage. This paper investigates a complete renewable heating system (RHS) framework and sizing the components to decarbonise building heating. The relationship between the reduction of gas consumption and the requirement of battery storage system (BSS) under the corresponding installation capacity of renewable components is analysed with their technical requirements. Then, according to different investment plans, this paper uses the particle swarm optimisation algorithm for optimal sizing of each component in the RHS to find a solution to minimise CO2 emissions. The results verify that the RHS with optimal sizing can minimise CO2 emissions and reduce the operational cost of natural gas. This work provides a feasible solution of how to invest the RHS to replace the existing heating system based on gas boilers and CHPs

    Optimal allocation of battery energy storage systems to enhance system performance and reliability in unbalanced distribution networks

    Get PDF
    The continuously increasing renewable distributed generation (DG) penetration rate significantly reduces environmental pollution and power generation cost and satisfies society’s rapid growth in electricity demand. Nevertheless, high penetration of renewable DGs, such as wind power and photovoltaics (PV), might deteriorate the system’s efficiency and reliability due to its intermittent and stochastic natures. Introducing battery energy storage systems (BESSs) to the distribution system provides a practical method to compensate for the above deficiency since it can deliver and absorb power when needed. Hence, it is important to determine the optimal allocation of BESS to achieve maximum assistance in the grid. This study proposes an optimal BESS allocation methodology to improve reliability and economics in unbalanced distribution systems. The optimal BESS allocation problem is solved by simultaneously minimizing the cost of energy interruption, expected energy not supplied, power loss, line loading, voltage deviation, and BESS cost. The proposed technique is implemented and analyzed on a high renewable DG penetrated unbalanced IEEE-33 bus network using DIgSILENT PowerFactory software (version 2020 SP2A). An enhanced grey wolf optimization (EGWO) algorithm is developed to optimize BESS location and size according to the selected objective function. The simulation results show that the proposed optimal BESS optimization technique significantly improves the economics and reliability in unbalanced distribution systems and the EGWO outperforms the gray wolf optimization (GWO) and particle swarm optimization (PSO) algorithms

    Integration, control and optimization of the solar photovoltaic-battery system in microgrids

    Get PDF
    This document composes the work realised and the research results developed within the scope of electric energy storage at the Renewable Energy Chair of the University of Évora. The current legal and technological framework of electrochemical energy storage technologies is reported, and its framework is demonstrated in the Portuguese and European contexts. Next, the experimental microgrid that comprises several electric energy storage technologies is described. The lithium-ion and vanadium redox flow technologies were tested and characterized for later validation of the electrical models that describe their performance. A state-of-the-art review allowed the experimentation of energy management strategies that fit the technologies studied, allowing smarter management in residential and services sectors. In this thesis, management algorithms, battery models, and an indication of technical, economic and energy parameters were combined in a tool to study the simulation of the operation of these technologies, allowing to define different operating objectives, fine-tune parameters and even join the operation of different technologies. This work was accompanied by national and international projects, attempting to respond to existing problems in the operation of real systems and gaps identified in the design phase, such as a robust dimensioning tool, with the integration of different battery managing methods; Integração, controlo e otimização do sistema solar fotovoltaico-bateria em microrredes Resumo: Este documento compõe o trabalho realizado e respetivos resultados da investigação desenvolvida no âmbito do armazenamento de energia elétrica na Cátedra Energias Renováveis da Universidade de Évora. Os atuais enquadramentos legais e tecnológicos das tecnologias eletroquímicas de armazenamento de energia são relatados, nos contextos português e europeu. Seguidamente, uma microrrede experimental que inclui diversas tecnologias de armazenamento de energia elétrica é descrita. As tecnologias de fluxo redox de vanádio e de iões de lítio foram objeto de ensaio e caracterização, para posterior validação dos correspondentes modelos que descrevem a sua performance elétrica. A revisão do estado da arte permitiu a experimentação de estratégias de gestão de energia que se adequam às tecnologias estudadas, que permitam a sua gestão inteligente, no contexto residencial e de serviços. Nesta tese, os algoritmos de gestão, os modelos das baterias, a indicação de parâmetros técnicos, económicos e energéticos foram combinados numa ferramenta para estudo da simulação da operação destas tecnologias permitindo definir diferente objetivos, afinar parâmetros e até operar conjuntamente diferentes tecnologias. Este trabalho foi acompanhado pelo paralelismo de projetos nacionais e internacionais, tentado dar resposta a problemas existentes na operação de sistemas reais, e lacunas identificadas na fase de projeto, tal como uma ferramenta de dimensionamento robusto, com a integração de diferentes formas de gerir baterias

    A HYBRIDIZED SMES / BESS OPTIMAL STORAGE SYSTEM

    Get PDF

    An overview of application-oriented multifunctional large-scale stationary battery and hydrogen hybrid energy storage system

    Get PDF
    The imperative to address traditional energy crises and environmental concerns has accelerated the need for energy structure transformation. However, the variable nature of renewable energy poses challenges in meeting complex practical energy requirements. To address this issue, the construction of a multifunctional large-scale stationary energy storage system is considered an effective solution. This paper critically examines the battery and hydrogen hybrid energy storage systems. Both technologies face limitations hindering them from fully meeting future energy storage needs, such as large storage capacity in limited space, frequent storage with rapid response, and continuous storage without loss. Batteries, with their rapid response (90 %), excel in frequent short-duration energy storage. However, limitations such as a self-discharge rate (>1 %) and capacity loss (∼20 %) restrict their use for long-duration energy storage. Hydrogen, as a potential energy carrier, is suitable for large-scale, long-duration energy storage due to its high energy density, steady state, and low loss. Nevertheless, it is less efficient for frequent energy storage due to its low storage efficiency (∼50 %). Ongoing research suggests that a battery and hydrogen hybrid energy storage system could combine the strengths of both technologies to meet the growing demand for large-scale, long-duration energy storage. To assess their applied potentials, this paper provides a detailed analysis of the research status of both energy storage technologies using proposed key performance indices. Additionally, application-oriented future directions and challenges of the battery and hydrogen hybrid energy storage system are outlined from multiple perspectives, offering guidance for the development of advanced energy storage systems
    corecore