Towards Accurate Estimation of Error Sensitivity in Computer Systems

Fault injection is an increasingly important method for assessing, measuringand observing the system-level impact of hardware and software faults in computer systems. This thesis presents the results of a series of experimental studies in which fault injection was used to investigate the impact of bit-flip errors on program execution. The studies were motivated by the fact that transient hardware faults in microprocessors can cause bit-flip errors that can propagate to the microprocessors instruction set architecture registers and main memory. As the rate of such hardware faults is expected to increase with technology scaling, there is a need to better understand how these errors (known as ‘soft errors’) influence program execution, especially in safety-critical systems.Using ISA-level fault injection, we investigate how five aspects, or factors, influence the error sensitivity of a program. We define error sensitivity as the conditional probability that a bit-flip error in live data in an ISA-register or main-memory word will cause a program to produce silent data corruption (SDC; i.e., an erroneous result). We also consider the estimation of a measure called SDC count, which represents the number of ISA-level bit flips that cause an SDC.The five factors addressed are (a) the inputs processed by a program, (b) the level of compiler optimization, (c) the implementation of the program in the source code, (d) the fault model (single bit flips vs double bit flips) and (e)the fault-injection technique (inject-on-write vs inject-on-read). Our results show that these factors affect the error sensitivity in many ways; some factors strongly impact the error sensitivity or SDC count whereas others show a weaker impact. For example, our experiments show that single bit flips tend to cause SDCs more than double bit flips; compiler optimization positively impacts the SDC count but not necessarily the error sensitivity; the error sensitivity varies between 20% and 50% among the programs we tested; and variations in input affect the error sensitivity significantly for most of the tested programs

Infrared system studies for the earth resource program Final report

Obtaining terrain surface temperatures from radiances measured in orbi

Experiments in fault tolerant software reliability

The reliability of voting was evaluated in a fault-tolerant software system for small output spaces. The effectiveness of the back-to-back testing process was investigated. Version 3.0 of the RSDIMU-ATS, a semi-automated test bed for certification testing of RSDIMU software, was prepared and distributed. Software reliability estimation methods based on non-random sampling are being studied. The investigation of existing fault-tolerance models was continued and formulation of new models was initiated

A review on the complementarity of renewable energy sources: concept, metrics, application and future research directions

It is expected, and regionally observed, that energy demand will soon be covered by a widespread deployment of renewable energy sources. However, the weather and climate driven energy sources are characterized by a significant spatial and temporal variability. One of the commonly mentioned solutions to overcome the mismatch between demand and supply provided by renewable generation is a hybridization of two or more energy sources in a single power station (like wind-solar, solar-hydro or solar-wind-hydro). The operation of hybrid energy sources is based on the complementary nature of renewable sources. Considering the growing importance of such systems and increasing number of research activities in this area this paper presents a comprehensive review of studies which investigated, analyzed, quantified and utilized the effect of temporal, spatial and spatio-temporal complementarity between renewable energy sources. The review starts with a brief overview of available research papers, formulates detailed definition of major concepts, summarizes current research directions and ends with prospective future research activities. The review provides a chronological and spatial information with regard to the studies on the complementarity concept.Comment: 34 pages 7 figures 3 table

Experiments in fault tolerant software reliability

Twenty functionally equivalent programs were built and tested in a multiversion software experiment. Following unit testing, all programs were subjected to an extensive system test. In the process sixty-one distinct faults were identified among the versions. Less than 12 percent of the faults exhibited varying degrees of positive correlation. The common-cause (or similar) faults spanned as many as 14 components. However, a majority of these faults were trivial, and easily detected by proper unit and/or system testing. Only two of the seven similar faults were difficult faults, and both were caused by specification ambiguities. One of these faults exhibited variable identical-and-wrong response span, i.e. response span which varied with the testing conditions and input data. Techniques that could have been used to avoid the faults are discussed. For example, it was determined that back-to-back testing of 2-tuples could have been used to eliminate about 90 percent of the faults. In addition, four of the seven similar faults could have been detected by using back-to-back testing of 5-tuples. It is believed that most, if not all, similar faults could have been avoided had the specifications been written using more formal notation, the unit testing phase was subject to more stringent standards and controls, and better tools for measuring the quality and adequacy of the test data (e.g. coverage) were used

Advanced information processing system for advanced launch system: Avionics architecture synthesis

The Advanced Information Processing System (AIPS) is a fault-tolerant distributed computer system architecture that was developed to meet the real time computational needs of advanced aerospace vehicles. One such vehicle is the Advanced Launch System (ALS) being developed jointly by NASA and the Department of Defense to launch heavy payloads into low earth orbit at one tenth the cost (per pound of payload) of the current launch vehicles. An avionics architecture that utilizes the AIPS hardware and software building blocks was synthesized for ALS. The AIPS for ALS architecture synthesis process starting with the ALS mission requirements and ending with an analysis of the candidate ALS avionics architecture is described

A feasibility study: California Department of Forestry and Fire Protection utilization of infrared technologies for wildland fire suppression and management

NASA's JPL has completed a feasibility study using infrared technologies for wildland fire suppression and management. The study surveyed user needs, examined available technologies, matched the user needs with technologies, and defined an integrated infrared wildland fire mapping concept system configuration. System component trade-offs were presented for evaluation in the concept system configuration. The economic benefits of using infrared technologies in fire suppression and management were examined. Follow-on concept system configuration development and implementation were proposed

A Reasoning Framework for Dependability in Software Architectures

The degree to which a software system possesses specified levels of software quality attributes, such as performance and modifiability, often have more influence on the success and failure of those systems than the functional requirements. One method of improving the level of a software quality that a product possesses is to reason about the structure of the software architecture in terms of how well the structure supports the quality. This is accomplished by reasoning through software quality attribute scenarios while designing the software architecture of the system. As society relies more heavily on software systems, the dependability of those systems becomes critical. In this study, a framework for reasoning about the dependability of a software system is presented. Dependability is a multi-faceted software quality attribute that encompasses reliability, availability, confidentiality, integrity, maintainability and safety. This makes dependability more complex to reason about than other quality attributes. The goal of this reasoning framework is to help software architects build dependable software systems by using quantitative and qualitative techniques to reason about dependability in software architectures

Aeronautical engineering: A continuing bibliography with indexes, supplement 100

This bibliography lists 295 reports, articles, and other documents introduced into the NASA Scientific and Technical Information System in August 1978