Flashover performance of lightning protected buildings using scaled models and electric field analysis

In early era, Benjamin Franklin discovered that the application of Lightning Rod (also known as the Franklin Rod) method is found to be effectived as a lightning protective device for buildings. Hence, it was considered among the best solution to overcome the problems facing by publics due to lightning strikes. However, few years later it was found that the corroded Franklin Rod due to the impact of environmental contaminations tends to reduce its ability to effectively capture the lightning strikes. The directly or indirectly impacts of lightning strikes had caused owners to spend huge amount of money just to repair damages on the buildings. Nowadays, there were many professional standards and documents guiding public to properly install the building’s lightning protection system, yet the same damages problems had shown to be frequently occur that related to the strikes often bypasses the of Lightning Air Terminal (LAT) system. The main reason for this could be due to lacking ideas by learned circle of lightning experts as not to fully understand the behavior of Franklin Rods system when it interacts with the lightning leaders. Therefore, this thesis discusses the works that investigated the flashover performances occurred on the buildings with various structural geometry shapes. The case study method is using small scaled models for both laboratory and simulation works, aiming to understand the Franklin Rods performance on capturing lightning leaders. Summarizing the works, about 11 scaled-down building shape models equipped with Franklin Rods system are selected in the case studies such as follows; a conical, gable, triangular, half circle, L-shape, square, cylindrical, butterfly, pyramid, rectangular and inclined like shapes. These models were then injected with 30 lightning flashes each using the 100 kVpeak single stage impulse generator. This number of flashes is considered as total two-years lightning activity frequencies in Malaysia, which the lighting flash density is statistically recorded to be around 15 flashes / year / km2. The maximum applied voltage is about 86.5 kVpeak. The model scaling concept is based on 1:30 cm ratio for every 3 m height of building structure. Interestingly, the overall work data had shown that the pyramid-like shapes is found to be the best structure type to be used in reducing the LAT bypasses and direct strike damages. The structure’s Franklin Rod protection system captured the least number of strikes during competitive tests conducted on all of the scaled down building models. Works of electric field analysis on all building models were conducted using ANSYS Maxwell simulation tool. Utilisation of electric field plot data in this work enables the creation of likelihood factor (ranging from 0.1 to 0.9) method that so useful to capable predict the strikes pattern occurring on dedicated terminal rod. Both laboratory and simulation work also confirm that the edge shapes play crucial roles as intense electric fields is found to accumulate on the edges area when the Franklin Rod intercepts the lightning leaders. These mentioned findings lead to introducing better method of LAT placement on the top of the building, whereby the existing lightning protection system is recommended to have one of installed LAT rods elongated to act as sacrificial point to directly attract lightning strikes. All the work and key findings in this work can contribute to the science and technology field toward having a better LAT lightning protection system and also lead to better decision in selecting / designing the shapes and edges concept as to reduce likelihood of LAT bypasses and damages of the building structure

Gamedec. UKW in IGDA Curriculum Framework

Launched in October 2013, GAMEDEC: game studies Design is a specialisation track within the 2nd Gen Humanities (aka Humanities 2.0) 3-year BA programme at Kazimierz Wielki University (UKW) in Bydgoszcz, Poland. The curriculum was created by UKW academic staff with game design experience, guided by the IGDA 2008 Framework and consulted with game dev professionals. It underwent slight modifications in 2014 and a significant transformation in 2015. This paper aims at a thorough analysis of the structure of the curriculum as seen through the lens of the IGDA Framework (2008), including the coverage of both Core Topics and Institutional Considerations. The analysis is conducted in the context of foreign (mostly U.S.- based) game degrees and supported with comments on its design, implementation and modifications

Perspectives of Integrated “Next Industrial Revolution” Clusters in Poland and Siberia

Rozdział z: Functioning of the Local Production Systems in Central and Eastern European Countries and Siberia. Case Studies and Comparative Studies, ed. Mariusz E. Sokołowicz.The paper presents the mapping of potential next industrial revolution clusters in Poland and Siberia. Deindustrialization of the cities and struggles with its consequences are one of the fundamental economic problems in current global economy. Some hope to find an answer to that problem is associated with the idea of next industrial revolution and reindustrialization initiatives. In the paper, projects aimed at developing next industrial revolution clusters are analyzed. The objective of the research was to examine new industrial revolution paradigm as a platform for establishing university-based trans-border industry clusters in Poland and Siberia47 and to raise awareness of next industry revolution initiatives.Monograph financed under a contract of execution of the international scientific project within 7th Framework Programme of the European Union, co-financed by Polish Ministry of Science and Higher Education (title: “Functioning of the Local Production Systems in the Conditions of Economic Crisis (Comparative Analysis and Benchmarking for the EU and Beyond”)). Monografia sfinansowana w oparciu o umowę o wykonanie projektu między narodowego w ramach 7. Programu Ramowego UE, współfinansowanego ze środków Ministerstwa Nauki i Szkolnictwa Wyższego (tytuł projektu: „Funkcjonowanie lokalnych systemów produkcyjnych w warunkach kryzysu gospodarczego (analiza porównawcza i benchmarking w wybranych krajach UE oraz krajach trzecich”))

The Design and Development of a Multi-Disciplinary Project in Embedded Systems Design

As has been noted over the past ten years, “The wall between computer science and electrical engineering has kept the potential of embedded systems at bay. It is time to build a new scientific foundation with embedded systems design as the cornerstone, which will ensure a systematic and even-handed integration of the two fields.”[1] In Baylor University’s School of Engineering & Computer Science, the Embedded Systems course in the Department of Computer Science, and the Embedded Systems Design course in the Department of Electrical and Computer Engineering have been offered independent of each other in the recent past. In the past year, however, this is beginning to change, with plans developing to combine the project portion of the two courses into one multi-disciplinary group project. This paper will document the two courses – scope and sequence, as well as emphasis, equipment used, and delivery style – highlighting the need for a new and innovative approach at the systematic integration of software and hardware in the design and development of a mutli-disciplinary group project. The beta test of this group project is occurring in the fall 2017 semester, with full first-time full-scale deployment during the spring 2018 semester. The results of this beta test will be discussed, and the lessons learned and planned modifications to the course will be considered.Cockrell School of Engineerin

The Digital Scholar Revisited

The book The Digital Scholar was published in 2011, and used Boyer’s framework of scholarship to examine the possible impact of digital, networked technology on scholarly practice. In 2011 the general attitude towards digital scholarship was cautious, although areas of innovative practice were emerging. Using this book as a basis, the author considers changes in digital scholarship since its publication. Five key themes are identified: mainstreaming of digital scholarship, so that it is a widely accepted and encouraged practice; the shift to open, with the emphasis on the benefits that open practice brings rather than the digital or networked aspects; policy implementation, particularly in areas of educational technology platforms, open access policies and open educational resources; network identity, emphasising the development of academic identity through social media and other tools; criticality of digital scholarship, which examines the negative issues associated with online abuse, privacy and data usage. Each of these themes is explored, and their impact in terms of Boyer’s original framing of scholarly activity considered. Boyer’s four scholarly activities of discovery, integration, application and teaching can be viewed from the perspective of these five themes. In conclusion what has been realised does not constitute a revolution in academic practice, but rather a gradual acceptance and utilisation of digital scholarship techniques, practices and values. It is simultaneously true that both radical change has taken place, and nothing has fundamentally altered. Much of the increased adoption in academia mirrors the wider penetration of social media tools amongst society in general, so academics are more likely to have an identity in such places that mixes professional and personal

Oceanography Professional Development in Virginia Via Collaboration, Field Integration, and Inquiry

Seventy-nine in-service teachers completed one of six sections of a grant-funded, graduate-level, summer course entitled, Oceanography, that was offered at four different locations in Virginia between 2005 and 2007. The majority of the teachers enrolled with the objective of obtaining their add-on earth science endorsement through the Virginia Earth Science Collaborative (VESC). Oceanography was designed to integrate the following: 1) the ocean science disciplines of geology, chemistry, physics, and biology; 2) inquiry-based learning strategies, quantitative activities, and technology; and, 3) Virginia Institute of Marine Science (VIMS) field experience with classroom experiences. These design themes were informed by ocean science content standards and science education best practices, and supported the goal that, upon completion of the course, teachers would be confident and competent in their abilities to teach oceanography concepts to grades 6-12 [1-3]. Learning outcomes, instructor feedback, and participant feedback suggest that the VESC’s Oceanography can serve as an instructional model for teacher professional development in oceanography. A collaborative instructional framework (marine educators, master teacher, and university faculty), small class size, and end-of-course field synthesis projects are additional elements that contributed to positive learning outcomes in course sections. The primary challenge in the course was the compressed, two-week time frame of face-to-face instruction

FORGE: An eLearning Framework for Remote Laboratory Experimentation on FIRE Testbed Infrastructure

The Forging Online Education through FIRE (FORGE) initiative provides educators and learners in higher education with access to world-class FIRE testbed infrastructure. FORGE supports experimentally driven research in an eLearning environment by complementing traditional classroom and online courses with interactive remote laboratory experiments. The project has achieved its objectives by defining and implementing a framework called FORGEBox. This framework offers the methodology, environment, tools and resources to support the creation of HTML-based online educational material capable accessing virtualized and physical FIRE testbed infrastruc- ture easily. FORGEBox also captures valuable quantitative and qualitative learning analytic information using questionnaires and Learning Analytics that can help optimise and support student learning. To date, FORGE has produced courses covering a wide range of networking and communication domains. These are freely available from FORGEBox.eu and have resulted in over 24,000 experiments undertaken by more than 1,800 students across 10 countries worldwide. This work has shown that the use of remote high- performance testbed facilities for hands-on remote experimentation can have a valuable impact on the learning experience for both educators and learners. Additionally, certain challenges in developing FIRE-based courseware have been identified, which has led to a set of recommendations in order to support the use of FIRE facilities for teaching and learning purposes

FORGE enabling FIRE facilities for the eLearning community

International audienceMany engineering students at third-level institutions across the world will not have the advantage of using real-world experimentation equipment, as the infrastructure and resources required for this activity are too expensive. This paper explains how the FORGE (Forging Online Education through FIRE) FP7 project transforms Future Internet Research and Experimentation (FIRE) testbed facilities into educational resources for the eLearning community. This is achieved by providing a framework for remote experimentation that supports easy access and control to testbed infrastructure for students and educators. Moreover, we identify a list of recommendations to support development of eLearning courses that access these facilities and highlight some of the challenges encountered by FORGE