Exploiting a new level of DLP in multimedia applications

This paper proposes and evaluates MOM: a novel ISA paradigm targeted at multimedia applications. By fusing conventional vector ISA approaches together with more recent SIMD-like (Single Instruction Multiple Data) ISAs (such as MMX), we have developed a new matrix oriented ISA which efficiently deals with the small matrix structures typically found in multimedia applications. MOM exploits a level of DLP not reachable by neither conventional vector ISAs nor SIMD-like media ISA extensions. Our results show that MOM provides a factor of 1.3x to 4x performance improvement when compared with two different multimedia extensions (MMX and MDMX) on several kernels, which translates into up to a 50% of performance gain when measuring full applications (20% in average). Furthermore, the streaming nature of MOM provides additional advantages for executing multimedia applications, such as a very low fetch pressure or a high tolerance to memory latency, making MOM an ideal candidate for the embedded domain.Peer ReviewedPostprint (published version

Three-dimensional memory vectorization for high bandwidth media memory systems

Vector processors have good performance, cost and adaptability when targeting multimedia applications. However, for a significant number of media programs, conventional memory configurations fail to deliver enough memory references per cycle to feed the SIMD functional units. This paper addresses the problem of the memory bandwidth. We propose a novel mechanism suitable for 2-dimensional vector architectures and targeted at providing high effective bandwidth for SIMD memory instructions. The basis of this mechanism is the extension of the scope of vectorization at the memory level, so that 3-dimensional memory patterns can be fetched into a second-level register file. By fetching long blocks of data and by reusing 2-dimensional memory streams at this second-level register file, we obtain a significant increase in the effective memory bandwidth. As side benefits, the new 3-dimensional load instructions provide a high robustness to memory latency and a significant reduction of the cache activity, thus reducing power and energy requirements. At the investment of a 50% more area than a regular SIMD register file, we have measured and average speed-up of 13% and the potential for power savings in the L2 cache of a 30%.Peer ReviewedPostprint (published version

DLP+TLP processors for the next generation of media workloads

Future media workloads will require about two levels of magnitude the performance achieved by current general purpose processors. High uni-threaded performance will be needed to accomplish real-time constraints together with huge computational throughput, as next generation of media workloads will be eminently multithreaded (MPEG-4/MPEG-7). In order to fulfil the challenge of providing both good uni-threaded performance and throughput, we propose to join the simultaneous multithreading execution paradigm (SMT) together with the ability to execute media-oriented streaming /spl mu/-SIMD instructions. This paper evaluates the performance of two different aggressive SMT processors: one with conventional /spl mu/-SIMD extensions (such as MMX) and one with longer streaming vector /spl mu/-SIMD extensions. We will show that future media workloads are, in fact, dominated by the scalar performance. The combination of SMT plus streaming vector /spl mu/-SIMD helps alleviate the performance bottleneck of the integer unit. SMT allowsPeer ReviewedPostprint (published version

Exploring Processor and Memory Architectures for Multimedia

Multimedia has become one of the cornerstones of our 21st century society and, when combined with mobility, has enabled a tremendous evolution of our society. However, joining these two concepts introduces many technical challenges. These range from having sufficient performance for handling multimedia content to having the battery stamina for acceptable mobile usage. When taking a projection of where we are heading, we see these issues becoming ever more challenging by increased mobility as well as advancements in multimedia content, such as introduction of stereoscopic 3D and augmented reality. The increased performance needs for handling multimedia come not only from an ongoing step-up in resolution going from QVGA (320x240) to Full HD (1920x1080) a 27x increase in less than half a decade. On top of this, there is also codec evolution (MPEG-2 to H.264 AVC) that adds to the computational load increase. To meet these performance challenges there has been processing and memory architecture advances (SIMD, out-of-order superscalarity, multicore processing and heterogeneous multilevel memories) in the mobile domain, in conjunction with ever increasing operating frequencies (200MHz to 2GHz) and on-chip memory sizes (128KB to 2-3MB). At the same time there is an increase in requirements for mobility, placing higher demands on battery-powered systems despite the steady increase in battery capacity (500 to 2000mAh). This leaves negative net result in-terms of battery capacity versus performance advances. In order to make optimal use of these architectural advances and to meet the power limitations in mobile systems, there is a need for taking an overall approach on how to best utilize these systems. The right trade-off between performance and power is crucial. On top of these constraints, the flexibility aspects of the system need to be addressed. All this makes it very important to reach the right architectural balance in the system. The first goal for this thesis is to examine multimedia applications and propose a flexible solution that can meet the architectural requirements in a mobile system. Secondly, propose an automated methodology of optimally mapping multimedia data and instructions to a heterogeneous multilevel memory subsystem. The proposed methodology uses constraint programming for solving a multidimensional optimization problem. Results from this work indicate that using today’s most advanced mobile processor technology together with a multi-level heterogeneous on-chip memory subsystem can meet the performance requirements for handling multimedia. By utilizing the automated optimal memory mapping method presented in this thesis lower total power consumption can be achieved, whilst performance for multimedia applications is improved, by employing enhanced memory management. This is achieved through reduced external accesses and better reuse of memory objects. This automatic method shows high accuracy, up to 90%, for predicting multimedia memory accesses for a given architecture

Low power techniques for video compression

This paper gives an overview of low-power techniques proposed in the literature for mobile multimedia and Internet applications. Exploitable aspects are discussed in the behavior of different video compression tools. These power-efficient solutions are then classified by synthesis domain and level of abstraction. As this paper is meant to be a starting point for further research in the area, a lowpower hardware & software co-design methodology is outlined in the end as a possible scenario for video-codec-on-a-chip implementations on future mobile multimedia platforms

Design and evaluation of multimedia extensions for the DLX architecture

Multimedia computer architecture extensions for Hennessy and Patterson\u27s DLX architecture are developed following the study of multimedia applications and existing multimedia architecture extensions. Support for the extensions is added to a VHDL superscalar DLX CPU model as well as a DLX assembler. Key functions used in digital video encoding and decoding are modified to use the extensions, and simulations are undertaken using the VHDL model to determine the speedup offered by the extensions for these functions. The results of the simulations are used to calculate the application speedup based on the function speedup and the fraction of the time that each application spends executing each function. It is shown that the superscalar CPU design limits the performance gain offered by the extensions, and concluded that the effectiveness of the extensions is further limited by the fraction of the application code that can make use of them

VLSI architecture design approaches for real-time video processing

This paper discusses the programmable and dedicated approaches for real-time video processing applications. Various VLSI architecture including the design examples of both approaches are reviewed. Finally, discussions of several practical designs in real-time video processing applications are then considered in VLSI architectures to provide significant guidelines to VLSI designers for any further real-time video processing design works

SIMD acceleration for HEVC decoding

Single instruction multiple data (SIMD) instructions have been commonly used to accelerate video codecs. The recently introduced High Efficiency Video Coding (HEVC) codec like its predecessors is based on the hybrid video codec principle and, therefore, is also well suited to be accelerated with SIMD. In this paper we present the SIMD optimization for the entire HEVC decoder for all major SIMD instruction set architectures. Evaluation has been performed on 14 mobile and PC platforms covering most major architectures released in recent years. With SIMD, up to 5× speedup can be achieved over the entire HEVC decoder, resulting in up to 133 and 37.8 frames/s on average on a single core for Main profile 1080p and Main10 profile 2160p sequences, respectively.EC/FP7/288653/EU/Low-Power Parallel Computing on GPUs/LPGP

Enhancing a Neurosurgical Imaging System with a PC-based Video Processing Solution

This work presents a PC-based prototype video processing application developed to be used with a specific neurosurgical imaging device, the OPMI® PenteroTM operating microscope, in the Department of Neurosurgery of Helsinki University Central Hospital at Töölö, Helsinki. The motivation for implementing the software was the lack of some clinically important features in the imaging system provided by the microscope. The imaging system is used as an online diagnostic aid during surgery. The microscope has two internal video cameras; one for regular white light imaging and one for near-infrared fluorescence imaging, used for indocyanine green videoangiography. The footage of the microscope’s current imaging mode is accessed via the composite auxiliary output of the device. The microscope also has an external high resolution white light video camera, accessed via a composite output of a separate video hub. The PC was chosen as the video processing platform for its unparalleled combination of prototyping and high-throughput video processing capabilities. A thorough analysis of the platform and efficient video processing methods was conducted in the thesis and the results were used in the design of the imaging station. The features found feasible during the project were incorporated into a video processing application running on a GNU/Linux distribution Ubuntu. The clinical usefulness of the implemented features was ensured beforehand by consulting the neurosurgeons using the original system. The most significant shortcomings of the original imaging system were mended in this work. The key features of the developed application include: live streaming, simultaneous streaming and recording, and playing back of upto two video streams. The playback mode provides full media player controls, with a frame-by-frame precision rewinding, in an intuitive and responsive interface. A single view and a side-by-side comparison mode are provided for the streams. The former gives more detail, while the latter can be used, for example, for before-after and anatomic-angiographic comparisons.fi=Opinnäytetyö kokotekstinä PDF-muodossa.|en=Thesis fulltext in PDF format.|sv=Lärdomsprov tillgängligt som fulltext i PDF-format

Design of a Processor Optimized for Syntax Parsing in Video Decoders

8International audienceHeterogeneous platforms aim to offer both performance and flexibility by providing designers processors and programmable logical units on a single platform. Processors implemented on these platforms are usually soft-cores (e.g. Altera NIOS) or ASIC (e.g. ARM Cortex-A8). However, these processors still face limitations in terms of performance compared to full hardware designs in particular for real-time video decoding applications. We present in this paper an innovative approach to improve performance using both a processor optimized for the syntax parsing (an Application-Specific Instruction-set Processor) and a FPGA. The case study has been synthesized on a Xilinx FPGA at a frequency of 100MHz and we estimate the performance that could be obtained with an ASIC