A phonocardiographic-based fiber-optic sensor and adaptive filtering system for noninvasive continuous fetal heart rate monitoring

This paper focuses on the design, realization, and verification of a novel phonocardiographic-based fiber-optic sensor and adaptive signal processing system for noninvasive continuous fetal heart rate (fHR) monitoring. Our proposed system utilizes two Mach-Zehnder interferometeric sensors. Based on the analysis of real measurement data, we developed a simplified dynamic model for the generation and distribution of heart sounds throughout the human body. Building on this signal model, we then designed, implemented, and verified our adaptive signal processing system by implementing two stochastic gradient-based algorithms: the Least Mean Square Algorithm (LMS), and the Normalized Least Mean Square (NLMS) Algorithm. With this system we were able to extract the fHR information from high quality fetal phonocardiograms (fPCGs), filtered from abdominal maternal phonocardiograms (mPCGs) by performing fPCG signal peak detection. Common signal processing methods such as linear filtering, signal subtraction, and others could not be used for this purpose as fPCG and mPCG signals share overlapping frequency spectra. The performance of the adaptive system was evaluated by using both qualitative (gynecological studies) and quantitative measures such as: Signal-to-Noise Ratio-SNR, Root Mean Square Error-RMSE, Sensitivity-S+, and Positive Predictive Value-PPV.Web of Science174art. no. 89

Novel Approaches to ECG-Based Modeling and Characterization of Atrial Fibrillation

This thesis deals with signal processing algorithms for analysis of the electrocardiogram (ECG) during atrial fibrillation (AF). Such analysis can be used for diagnosing patients, and for monitoring and predicting their response to various treatment. The thesis comprises an introduction and five papers describing methods for ECG-based modeling and characterization of AF. Paper I--IV deal with methods for characterization of the atrial activity, whereas Paper V deals with modeling of the ventricular response, both problems with the assumption that AF is present. In Paper I, a number of measures characterizing the atrial activity in the ECG, obtained using time-frequency analysis as well as nonlinear methods, are evaluated for their ability to predict spontaneous termination of AF. The AF frequency, i.e, the repetition rate of the atrial fibrillatory waves of the ECG, proved to be a significant factor for discrimination between terminating and non-terminating AF. Noise is a common problem in ECG signals, particularly in long-term ambulatory recordings. Hence, robust algorithms for analysis and characterization are required. In Paper II, a robust method for tracking the AF frequency in noisy signals is presented. The method is based on a hidden Markov model (HMM), which takes the harmonic pattern of the atrial activity into account. Using the HMM-based method, the average RMS error of the frequency estimates at high noise levels was significantly lower compared to existing methods. In Paper III, the HMM-based method is employed for analysis of 24-h ambulatory ECG signals in order to explore circadian variation in AF frequency. Circadian variations reflect autonomic modulation; attenuation or absence of such variations may help to diagnose patients. Methods based on curve fitting, autocorrelation, and joint variation, respectively, are employed to quantify circadian variations, showing that it is present in most patients with long-standing persistent AF, although the short-term variation is considerable. In Paper IV, 24-h ambulatory ECG recordings with paroxysmal and persistent AF are analyzed using an entropy-based method for characterization of the atrial activity. Short segments are classified based on these measures, showing that it is feasible to distinguish between patient with paroxysmal and persistent AF from 10-s ECGs; the average classification rate was above 95%. The ventricular response during AF is mainly determined by the AV nodal blocking of atrial impulses. In Paper V, a new model-based approach for analysis of the ventricular response during AF is proposed. The model integrates physiological properties of the AV node and the atrial fibrillatory rate; the model parameters can be estimated from ECG signals. Results show that ventricular response is sufficiently represented by the estimated model in a majority of the recordings; in 85.7% of the analyzed 30-min segments the model fit was considered accurate, and that changes of AV nodal properties caused by autonomic modulation could be tracked through the estimated model parameters. In summary, the work within this thesis contributes with new methods for non-invasive analysis of AF, which can be used to tailor and evaluate different strategies for AF treatment

Characterization and processing of atrial fibrillation episodes by convolutive blind source separation algorithms and nonlinear analysis of spectral features

Las arritmias supraventriculares, en particular la fibrilación auricular (FA), son las enfermedades cardíacas más comúnmente encontradas en la práctica clínica rutinaria. La prevalencia de la FA es inferior al 1\% en la población menor de 60 años, pero aumenta de manera significativa a partir de los 70 años, acercándose al 10\% en los mayores de 80. El padecimiento de un episodio de FA sostenida, además de estar ligado a una mayor tasa de mortalidad, aumenta la probabilidad de sufrir tromboembolismo, infarto de miocardio y accidentes cerebrovasculares. Por otro lado, los episodios de FA paroxística, aquella que termina de manera espontánea, son los precursores de la FA sostenida, lo que suscita un alto interés entre la comunidad científica por conocer los mecanismos responsables de perpetuar o conducir a la terminación espontánea de los episodios de FA. El análisis del ECG de superficie es la técnica no invasiva más extendida en la diagnosis médica de las patologías cardíacas. Para utilizar el ECG como herramienta de estudio de la FA, se necesita separar la actividad auricular (AA) de las demás señales cardioeléctricas. En este sentido, las técnicas de Separación Ciega de Fuentes (BSS) son capaces de realizar un análisis estadístico multiderivación con el objetivo de recuperar un conjunto de fuentes cardioeléctricas independientes, entre las cuales se encuentra la AA. A la hora de abordar un problema de BSS, se hace necesario considerar un modelo de mezcla de las fuentes lo más ajustado posible a la realidad para poder desarrollar algoritmos matemáticos que lo resuelvan. Un modelo viable es aquel que supone mezclas lineales. Dentro del modelo de mezclas lineales se puede además hacer la restricción de que estas sean instantáneas. Este modelo de mezcla lineal instantánea es el utilizado en el Análisis de Componentes Independientes (ICA).Vayá Salort, C. (2010). Characterization and processing of atrial fibrillation episodes by convolutive blind source separation algorithms and nonlinear analysis of spectral features [Tesis doctoral no publicada]. Universitat Politècnica de València. https://doi.org/10.4995/Thesis/10251/8416Palanci

Tracking Rhythmicity in Biomedical Signals using Sequential Monte Carlo methods

Cyclical patterns are common in signals that originate from natural systems such as the human body and man-made machinery. Often these cyclical patterns are not perfectly periodic. In that case, the signals are called pseudo-periodic or quasi-periodic and can be modeled as a sum of time-varying sinusoids, whose frequencies, phases, and amplitudes change slowly over time. Each time-varying sinusoid represents an individual rhythmical component, called a partial, that can be characterized by three parameters: frequency, phase, and amplitude. Quasi-periodic signals often contain multiple partials that are harmonically related. In that case, the frequencies of other partials become exact integer multiples of that of the slowest partial. These signals are referred to as multi-harmonic signals. Examples of such signals are electrocardiogram (ECG), arterial blood pressure (ABP), and human voice. A Markov process is a mathematical model for a random system whose future and past states are independent conditional on the present state. Multi-harmonic signals can be modeled as a stochastic process with the Markov property. The Markovian representation of multi-harmonic signals enables us to use state-space tracking methods to continuously estimate the frequencies, phases, and amplitudes of the partials. Several research groups have proposed various signal analysis methods such as hidden Markov Models (HMM), short time Fourier transform (STFT), and Wigner-Ville distribution to solve this problem. Recently, a few groups of researchers have proposed Monte Carlo methods which estimate the posterior distribution of the fundamental frequency in multi-harmonic signals sequentially. However, multi-harmonic tracking is more challenging than single-frequency tracking, though the reason for this has not been well understood. The main objectives of this dissertation are to elucidate the fundamental obstacles to multi-harmonic tracking and to develop a reliable multi-harmonic tracker that can track cyclical patterns in multi-harmonic signals

Non-invasive identification of atrial fibrillation drivers

Atrial fibrillation (AF) is one of the most common cardiac arrhythmias. Nowadays the fibrillatory process is known to be provoked by the high-frequency reentrant activity of certain atrial regions that propagates the fibrillatory activity to the rest of the atrial tissue, and the electrical isolation of these key regions has demonstrated its effectiveness in terminating the fibrillatory process. The location of the dominant regions represents a major challenge in the diagnosis and treatment of this arrhythmia. With the aim to detect and locate the fibrillatory sources prior to surgical procedure, non-invasive methods have been developed such as body surface electrical mapping (BSPM) which allows to record with high spatial resolution the electrical activity on the torso surface or the electrocardiographic imaging (ECGI) which allows to non-invasively reconstruct the electrical activity in the atrial surface. Given the novelty of these systems, both technologies suffer from a lack of scientific knowledge about the physical and technical mechanisms that support their operation. Therefore, the aim of this thesis is to increase that knowledge, as well as studying the effectiveness of these technologies for the localization of dominant regions in patients with AF. First, it has been shown that BSPM systems are able to noninvasively identify atrial rotors by recognizing surface rotors after band-pass filtering. Furthermore, the position of such surface rotors is related to the atrial rotor location, allowing the distinction between left or right atrial rotors. Moreover, it has been found that the surface electrical maps in AF suffer a spatial smoothing effect by the torso conductor volume, so the surface electrical activity can be studied with a relatively small number of electrodes. Specifically, it has been seen that 12 uniformly distributed electrodes are sufficient for the correct identification of atrial dominant frequencies, while at least 32 leads are needed for non-invasive identification of atrial rotors. Secondly, the effect of narrowband filtering on the effectiveness of the location of reentrant patterns was studied. It has been found that this procedure allows isolating the reentrant electrical activity caused by the rotor, increasing the detection rate for both invasive and surface maps. However, the spatial smoothing caused by the regularization of the ECGI added to the temporal filtering causes a large increase in the spurious reentrant activity, making it difficult to detect real reentrant patterns. However, it has been found that maps provided by the ECGI without temporal filtering allow the correct detection of reentrant activity, so narrowband filtering should be applied for intracavitary or surface signal only. Finally, we studied the stability of the markers used to detect dominant regions in ECGI, such as frequency maps or the rotor presence. It has been found that in the presence of alterations in the conditions of the inverse problem, such as electrical or geometrical noise, these markers are significantly more stable than the ECGI signal morphology from which they are extracted. In addition, a new methodology for error reduction in the atrial spatial location based on the curvature of the curve L has been proposed. The results presented in this thesis showed that BSPM and ECGI systems allows to non-invasively locate the presence of high-frequency rotors, responsible for the maintenance of AF. This detection has been proven to be unambiguous and robust, and the physical and technical mechanisms that support this behavior have been studied. These results indicate that both non-invasive systems provide information of great clinical value in the treatment of AF, so their use can be helpful for selecting and planning atrial ablation procedures.La fibrilación auricular (FA) es una de las arritmias cardiacas más frecuentes. Hoy en día se sabe que el proceso fibrilatorio está provocado por la actividad reentrante a alta frecuencia de ciertas regiones auriculares que propagan la actividad fibrilatoria en el resto del tejido auricular, y se ha demostrado que el aislamiento eléctrico de estas regiones dominantes permite detener el proceso fibrilatorio. La localización de las regiones dominantes supone un gran reto en el diagnóstico y tratamiento de la FA. Con el objetivo de poder localizar las fuentes fibrilatorias con anterioridad al procedimiento quirúrgico, se han desarrollado métodos no invasivos como la cartografía eléctrica de superficie (CES) que registra con gran resolución espacial la actividad eléctrica en la superficie del torso o la electrocardiografía por imagen (ECGI) que permite reconstruir la actividad eléctrica en la superficie auricular. Dada la novedad de estos sistemas, existe una falta de conocimiento científico sobre los mecanismos físicos y técnicos que sustentan su funcionamiento. Por lo tanto, el objetivo de esta tesis es aumentar dicho conocimiento, así como estudiar la eficacia de ambas tecnologías para la localización de regiones dominantes en pacientes con FA. En primer lugar, ha visto que los sistemas CES permiten identificar rotores auriculares mediante el reconocimiento de rotores superficiales tras el filtrado en banda estrecha. Además, la posición de los rotores superficiales está relacionada con la localización de dichos rotores, permitiendo la distinción entre rotores de aurícula derecha o izquierda. Por otra parte, se ha visto que los mapas eléctricos superficiales durante FA sufren una gran suavizado espacial por el efecto del volumen conductor del torso, lo que permite que la actividad eléctrica superficial pueda ser estudiada con un número relativamente reducido de electrodos. Concretamente, se ha visto que 12 electrodos uniformemente distribuidos son suficientes para una correcta identificación de frecuencias dominantes, mientras que son necesarios al menos 32 para una correcta identificación de rotores auriculares. Por otra parte, también se ha estudiado el efecto del filtrado en banda estrecha sobre la eficacia de la localización de patrones reentrantes. Así, se ha visto que este procedimiento permite aislar la actividad eléctrica reentrante provocada por el rotor, aumentando la tasa de detección tanto para señal obtenida de manera invasiva como para los mapas superficiales. No obstante, este filtrado temporal sobre la señal de ECGI provoca un gran aumento de la actividad reentrante espúrea que dificulta la detección de patrones reentrantes reales. Sin embargo, los mapas ECGI sin filtrado temporal permiten la detección correcta de la actividad reentrante, por lo el filtrado debería ser aplicado únicamente para señal intracavitaria o superficial. Por último, se ha estudiado la estabilidad de los marcadores utilizados en ECGI para detectar regiones dominantes, como son los mapas de frecuencia o la presencia de rotores. Se ha visto que en presencia de alteraciones en las condiciones del problema inverso, como ruido eléctrico o geométrico, estos marcadores son significativamente más estables que la morfología de la propia señal ECGI. Además, se ha propuesto una nueva metodología para la reducción del error en la localización espacial de la aurícula basado en la curvatura de la curva L. Los resultados presentados en esta tesis revelan que los sistemas de CES y ECGI permiten localizar de manera no invasiva la presencia de rotores de alta frecuencia. Esta detección es univoca y robusta, y se han estudiado los mecanismos físicos y técnicos que sustentan dicho comportamiento. Estos resultados indican que ambos sistemas no invasivos proporcionan información de gran valor clínico en el tratamiento de la FA, por lo que su uso puede ser de gran ayuda para la selección y planificaciLa fibril·lació auricular (FA) és una de les arítmies cardíaques més freqüents. Hui en dia es sabut que el procés fibrilatori està provocat per l'activitat reentrant de certes regions auriculars que propaguen l'activitat fibril·latoria a la resta del teixit auricular, i s'ha demostrat que l'aïllament elèctric d'aquestes regions dominants permet aturar el procés fibrilatori. La localització de les regions dominants suposa un gran repte en el diagnòstic i tractament d'aquesta arítmia. Amb l'objectiu de poder localitzar fonts fibril·latories amb anterioritat al procediment quirúrgic s'han desenvolupat mètodes no invasius com la cartografia elèctrica de superfície (CES) que registra amb gran resolució espacial l'activitat elèctrica en la superfície del tors o l'electrocardiografia per imatge (ECGI) que permet obtenir de manera no invasiva l'activitat elèctrica en la superfície auricular. Donada la relativa novetat d'aquests sistemes, existeix una manca de coneixement científic sobre els mecanismes físics i tècnics que sustenten el seu funcionament. Per tant, l'objectiu d'aquesta tesi és augmentar aquest coneixement, així com estudiar l'eficàcia d'aquestes tecnologies per a la localització de regions dominants en pacients amb FA. En primer lloc, s'ha vist que els sistemes CES permeten identificar rotors auriculars mitjançant el reconeixement de rotors superficials després del filtrat en banda estreta. A més, la posició dels rotors superficials està relacionada amb la localització d'aquests rotors, permetent la distinció entre rotors de aurícula dreta o esquerra. També s'ha vist que els mapes elèctrics superficials durant FA pateixen un gran suavitzat espacial per l'efecte del volum conductor del tors, el que permet que l'activitat elèctrica superficial pugui ser estudiada amb un nombre relativament reduït d'elèctrodes. Concretament, s'ha vist que 12 elèctrodes uniformement distribuïts són suficients per a una correcta identificació de freqüències dominants auriculars, mentre que són necessaris almenys 32 per a una correcta identificació de rotors auriculars. D'altra banda, també s'ha estudiat l'efecte del filtrat en banda estreta sobre l'eficàcia de la localització de patrons reentrants. Així, s'ha vist que aquest procediment permet aïllar l'activitat elèctrica reentrant provocada pel rotor, augmentant la taxa de detecció tant pel senyal obtingut de manera invasiva com per als mapes superficials. No obstant això, aquest filtrat temporal sobre el senyal de ECGI provoca un gran augment de l'activitat reentrant espúria que dificulta la detecció de patrons reentrants reals. A més, els mapes proporcionats per la ECGI sense filtrat temporal permeten la detecció correcta de l'activitat reentrant, per la qual cosa el filtrat hauria de ser aplicat únicament per a senyal intracavitària o superficial. Per últim, s'ha estudiat l'estabilitat dels marcadors utilitzats en ECGI per a detectar regions auriculars dominants, com són els mapes de freqüència o la presència de rotors. S'ha vist que en presència d'alteracions en les condicions del problema invers, com soroll elèctric o geomètric, aquests marcadors són significativament més estables que la morfologia del mateix senyal ECGI. A més, s'ha proposat una nova metodologia per a la reducció de l'error en la localització espacial de l'aurícula basat en la curvatura de la corba L. Els resultats presentats en aquesta tesi revelen que els sistemes de CES i ECGI permeten localitzar de manera no invasiva la presència de rotors d'alta freqüència. Aquesta detecció és unívoca i robusta, i s'han estudiat els mecanismes físics i tècnics que sustenten aquest comportament. Aquests resultats indiquen que els dos sistemes no invasius proporcionen informació de gran valor clínic en el tractament de la FA, pel que el seu ús pot ser de gran ajuda per a la selecció i planificació de procediments d'ablació auricular.Rodrigo Bort, M. (2016). Non-invasive identification of atrial fibrillation drivers [Tesis doctoral]. Universitat Politècnica de València. https://doi.org/10.4995/Thesis/10251/75346TESISPremios Extraordinarios de tesis doctorale

Advances in Digital Processing of Low-Amplitude Components of Electrocardiosignals

This manual has been published within the framework of the BME-ENA project under the responsibility of National Technical University of Ukraine. The BME-ENA “Biomedical Engineering Education Tempus Initiative in Eastern Neighbouring Area”, Project Number: 543904-TEMPUS-1-2013-1-GR-TEMPUS-JPCR is a Joint Project within the TEMPUS IV program. This project has been funded with support from the European Commission.Навчальний посібник присвячено розробці методів та засобів для неінвазивного виявлення та дослідження тонких проявів електричної активності серця. Особлива увага приділяється вдосконаленню інформаційного та алгоритмічного забезпечення систем електрокардіографії високого розрізнення для ранньої діагностики електричної нестабільності міокарда, а також для оцінки функціонального стану плоду під час вагітності. Теоретичні основи супроводжуються прикладами реалізації алгоритмів за допомогою системи MATLAB. Навчальний посібник призначений для студентів, аспірантів, а також фахівців у галузі біомедичної електроніки та медичних працівників.The teaching book is devoted to development and research of methods and tools for non-invasive detection of subtle manifistations of heart electrical activity. Particular attention is paid to the improvement of information and algorithmic support of high resolution electrocardiography for early diagnosis of myocardial electrical instability, as well as for the evaluation of the functional state of the fetus during pregnancy examination. The theoretical basis accompanied by the examples of implementation of the discussed algorithms with the help of MATLAB. The teaching book is intended for students, graduate students, as well as specialists in the field of biomedical electronics and medical professionals

Non-invasive fetal electrocardiogram : analysis and interpretation

High-risk pregnancies are becoming more and more prevalent because of the progressively higher age at which women get pregnant. Nowadays about twenty percent of all pregnancies are complicated to some degree, for instance because of preterm delivery, fetal oxygen deficiency, fetal growth restriction, or hypertension. Early detection of these complications is critical to permit timely medical intervention, but is hampered by strong limitations of existing monitoring technology. This technology is either only applicable in hospital settings, is obtrusive, or is incapable of providing, in a robust way, reliable information for diagnosis of the well-being of the fetus. The most prominent method for monitoring of the fetal health condition is monitoring of heart rate variability in response to activity of the uterus (cardiotocography; CTG). Generally, in obstetrical practice, the heart rate is determined in either of two ways: unobtrusively with a (Doppler) ultrasound probe on the maternal abdomen, or obtrusively with an invasive electrode fixed onto the fetal scalp. The first method is relatively inaccurate but is non-invasive and applicable in all stages of pregnancy. The latter method is far more accurate but can only be applied following rupture of the membranes and sufficient dilatation, restricting its applicability to only the very last phase of pregnancy. Besides these accuracy and applicability issues, the use of CTG in obstetrical practice also has another limitation: despite its high sensitivity, the specificity of CTG is relatively low. This means that in most cases of fetal distress the CTG reveals specific patterns of heart rate variability, but that these specific patterns can also be encountered for healthy fetuses, complicating accurate diagnosis of the fetal condition. Hence, a prerequisite for preventing unnecessary interventions that are based on CTG alone, is the inclusion of additional information in diagnostics. Monitoring of the fetal electrocardiogram (ECG), as a supplement of CTG, has been demonstrated to have added value for monitoring of the fetal health condition. Unfortunately the application of the fetal ECG in obstetrical diagnostics is limited because at present the fetal ECG can only be measured reliably by means of an invasive scalp electrode. To overcome this limited applicability, many attempts have been made to record the fetal ECG non-invasively from the maternal abdomen, but these attempts have not yet led to approaches that permit widespread clinical application. One key difficulty is that the signal to noise ratio (SNR) of the transabdominal ECG recordings is relatively low. Perhaps even more importantly, the abdominal ECG recordings yield ECG signals for which the morphology depends strongly on the orientation of the fetus within the maternal uterus. Accordingly, for any fetal orientation, the ECG morphology is different. This renders correct clinical interpretation of the recorded ECG signals complicated, if not impossible. This thesis aims to address these difficulties and to provide new contributions on the clinical interpretation of the fetal ECG. At first the SNR of the recorded signals is enhanced through a series of signal processing steps that exploit specific and a priori known properties of the fetal ECG. More particularly, the dominant interference (i.e. the maternal ECG) is suppressed by exploiting the absence of temporal correlation between the maternal and fetal ECG. In this suppression, the maternal ECG complex is dynamically segmented into individual ECG waves and each of these waves is estimated through averaging corresponding waves from preceding ECG complexes. The maternal ECG template generated by combining the estimated waves is subsequently subtracted from the original signal to yield a non-invasive recording in which the maternal ECG has been suppressed. This suppression method is demonstrated to be more accurate than existing methods. Other interferences and noise are (partly) suppressed by exploiting the quasiperiodicity of the fetal ECG through averaging consecutive ECG complexes or by exploiting the spatial correlation of the ECG. The averaging of several consecutive ECG complexes, synchronized on their QRS complex, enhances the SNR of the ECG but also can suppress morphological variations in the ECG that are clinically relevant. The number of ECG complexes included in the average hence constitutes a trade-off between SNR enhancement on the one hand and loss of morphological variability on the other hand. To relax this trade-off, in this thesis a method is presented that can adaptively estimate the number of ECG complexes included in the average. In cases of morphological variations, this number is decreased ensuring that the variations are not suppressed. In cases of no morphological variability, this number is increased to ensure adequate SNR enhancement. The further suppression of noise by exploiting the spatial correlation of the ECG is based on the fact that all ECG signals recorded at several locations on the maternal abdomen originate from the same electrical source, namely the fetal heart. The electrical activity of the fetal heart at any point in time can be modeled as a single electrical field vector with stationary origin. This vector varies in both amplitude and orientation in three-dimensional space during the cardiac cycle and the time-path described by this vector is referred to as the fetal vectorcardiogram (VCG). In this model, the abdominal ECG constitutes the projection of the VCG onto the vector that describes the position of the abdominal electrode with respect to a reference electrode. This means that when the VCG is known, any desired ECG signal can be calculated. Equivalently, this also means that when enough ECG signals (i.e. at least three independent signals) are known, the VCG can be calculated. By using more than three ECG signals for the calculation of the VCG, redundancy in the ECG signals can be exploited for added noise suppression. Unfortunately, when calculating the fetal VCG from the ECG signals recorded from the maternal abdomen, the distance between the fetal heart and the electrodes is not the same for each electrode. Because the amplitude of the ECG signals decreases with propagation to the abdominal surface, these different distances yield a specific, unknown attenuation for each ECG signal. Existing methods for estimating the VCG operate with a fixed linear combination of the ECG signals and, hence, cannot account for variations in signal attenuation. To overcome this problem and be able to account for fetal movement, in this thesis a method is presented that estimates both the VCG and, to some extent, also the signal attenuation. This is done by determining for which VCG and signal attenuation the joint probability over both these variables is maximal given the observed ECG signals. The underlying joint probability distribution is determined by assuming the ECG signals to originate from scaled VCG projections and additive noise. With this method, a VCG, tailored to each specific patient, is determined. With respect to the fixed linear combinations, the presented method performs significantly better in the accurate estimation of the VCG. Besides describing the electrical activity of the fetal heart in three dimensions, the fetal VCG also provides a framework to account for the fetal orientation in the uterus. This framework enables the detection of the fetal orientation over time and allows for rotating the fetal VCG towards a prescribed orientation. From the normalized fetal VCG obtained in this manner, standardized ECG signals can be calculated, facilitating correct clinical interpretation of the non-invasive fetal ECG signals. The potential of the presented approach (i.e. the combination of all methods described above) is illustrated for three different clinical cases. In the first case, the fetal ECG is analyzed to demonstrate that the electrical behavior of the fetal heart differs significantly from the adult heart. In fact, this difference is so substantial that diagnostics based on the fetal ECG should be based on different guidelines than those for adult ECG diagnostics. In the second case, the fetal ECG is used to visualize the origin of fetal supraventricular extrasystoles and the results suggest that the fetal ECG might in future serve as diagnostic tool for relating fetal arrhythmia to congenital heart diseases. In the last case, the non-invasive fetal ECG is compared to the invasively recorded fetal ECG to gauge the SNR of the transabdominal recordings and to demonstrate the suitability of the non-invasive fetal ECG in clinical applications that, as yet, are only possible for the invasive fetal ECG

Deep Learning Algorithms for Time Series Analysis of Cardiovascular Monitoring Systems

This thesis investigates and develops methods to enable ubiquitous monitoring of the most examined cardiovascular signs, blood pressure, and heart rate. Their continuous measurement can help improve health outcomes, such as the detection of hypertension, heart attack, or stroke, which are the leading causes of death and disability. Recent research into wearable blood pressure monitors sought predominately to utilise a hypothesised relationship with pulse transit time, relying on quasiperiodic pulse event extractions from photoplethysmography local signal characteristics and often used only a fraction of typically bivariate time series. This limitation has been addressed in this thesis by developing methods to acquire and utilise fused multivariate time series without the need for manual feature engineering by leveraging recent advances in data science and deep learning methods that showed great data analysis potential in other domains