Fault Diagnosis and Fault-Tolerant Control of Unmanned Aerial Vehicles

With the increasing demand for unmanned aerial vehicles (UAVs) in both military and civilian applications, critical safety issues need to be specially considered in order to make better and wider use of them. UAVs are usually employed to work in hazardous and complex environments, which may seriously threaten the safety and reliability of UAVs. Therefore, the safety and reliability of UAVs are becoming imperative for development of advanced intelligent control systems. The key challenge now is the lack of fully autonomous and reliable control techniques in face of different operation conditions and sophisticated environments. Further development of unmanned aerial vehicle (UAV) control systems is required to be reliable in the presence of system component faults and to be insensitive to model uncertainties and external environmental disturbances. This thesis research aims to design and develop novel control schemes for UAVs with consideration of all the factors that may threaten their safety and reliability. A novel adaptive sliding mode control (SMC) strategy is proposed to accommodate model uncertainties and actuator faults for an unmanned quadrotor helicopter. Compared with the existing adaptive SMC strategies in the literature, the proposed adaptive scheme can tolerate larger actuator faults without stimulating control chattering due to the use of adaptation parameters in both continuous and discontinuous control parts. Furthermore, a fuzzy logic-based boundary layer and a nonlinear disturbance observer are synthesized to further improve the capability of the designed control scheme for tolerating model uncertainties, actuator faults, and unknown external disturbances while preventing overestimation of the adaptive control parameters and suppressing the control chattering effect. Then, a cost-effective fault estimation scheme with a parallel bank of recurrent neural networks (RNNs) is proposed to accurately estimate actuator fault magnitude and an active fault-tolerant control (FTC) framework is established for a closed-loop quadrotor helicopter system. Finally, a reconfigurable control allocation approach is combined with adaptive SMC to achieve the capability of tolerating complete actuator failures with application to a modified octorotor helicopter. The significance of this proposed control scheme is that the stability of the closed-loop system is theoretically guaranteed in the presence of both single and simultaneous actuator faults

CONTROL STRATEGY OF MULTIROTOR PLATFORM UNDER NOMINAL AND FAULT CONDITIONS USING A DUAL-LOOP CONTROL SCHEME USED FOR EARTH-BASED SPACECRAFT CONTROL TESTING

Over the last decade, autonomous Unmanned Aerial Vehicles (UAVs) have seen increased usage in industrial, defense, research, and academic applications. Specific attention is given to multirotor platforms due to their high maneuverability, utility, and accessibility. As such, multirotors are often utilized in a variety of operating conditions such as populated areas, hazardous environments, inclement weather, etc. In this study, the effectiveness of multirotor platforms, specifically quadrotors, to behave as Earth-based satellite test platforms is discussed. Additionally, due to concerns over system operations under such circumstances, it becomes critical that multirotors are capable of operation despite experiencing undesired conditions and collisions which make the platform susceptible to on-board hardware faults. Without countermeasures to account for such faults, specifically actuator faults, a multirotors will experience catastrophic failure. In this thesis, a control strategy for a quadrotor under nominal and fault conditions is proposed. The process of defining the quadrotor dynamic model is discussed in detail. A dual-loop SMC/PID control scheme is proposed to control the attitude and position states of the nominal system. Actuator faults on-board the quadrotor are interpreted as motor performance losses, specifically loss in rotor speeds. To control a faulty system, an additive control scheme is implemented in conjunction with the nominal scheme. The quadrotor platform is developed via analysis of the various subcomponents. In addition, various physical parameters of the quadrotor are determined experimentally. Simulated and experimental testing showed promising results, and provide encouragement for further refinement in the future

Lyapunov-based fault tolerant control of quadrotor unmanned aerial vehicles

This thesis presents the theoretical development, simulation study and flight tests of a Lyapunov-based control approach for the Fault Tolerant Control (FTC) of a quadrotor unmanned aerial vehicle (UAV). Based on the derivation of nonlinear model of the dynamics of the quadrotor UAV, a Lyapunov-based control approach with fixed controller gains is proposed and firstly demonstrated through simulations of the quadrotor UAV for handling system parameter uncertainties. Secondly, this proposed Lyapunov-based approach with the selected controller gains is applied as a fault tolerant controller in the framework of a passive Fault Tolerant Control System (FTCS), for handling less severe faults occurring in the quadrotor UAV. Thirdly, the proposed new controller by Lyapunov-based adaptive control method for fault tolerant control of the quadrotor UAV is proposed to handle more severe faults. Finally, the Lyapunov-based control method has been implemented to the test bed, Qball-X4 Unmanned Aerial Vehicle, and the acceptable performances on altitude control have been achieved. In the thesis, simulation and flight testing results demonstrate that the FTCS with the Lyapunov-based approach has certain robustness for most of partial losses. However, the FTCS with Lyapunov-based adaptive control approach has advantages in accommodating more severe faults for, which may not be addressed by the Lyapunov-based approac

The Design of Fixed-Time Observer and Finite-Time Fault-Tolerant Control for Hypersonic Gliding Vehicles

This paper proposes a fault-tolerant control scheme for a hypersonic gliding vehicle to counteract actuator faults and model uncertainties. Starting from the kinematic and aerodynamic models of the hypersonic vehicle, the control-oriented model subject to actuator faults is built. The observers are designed to estimate the information of actuator faults and model uncertainties, and to guarantee the estimation errors for converging to zero in fixed settling time. Subsequently, the finite-time multivariable terminal sliding mode control and composite-loop design are pursued to enable integration into the faulttolerant control, which can ensure the safety of the postfault vehicle in a timely manner. Simulation studies of a six degree-of-freedom nonlinear model of the hypersonic gliding vehicle are carried out to manifest the effectiveness of the investigated fault-tolerant control system

The 1st International Conference on Computational Engineering and Intelligent Systems

Computational engineering, artificial intelligence and smart systems constitute a hot multidisciplinary topic contrasting computer science, engineering and applied mathematics that created a variety of fascinating intelligent systems. Computational engineering encloses fundamental engineering and science blended with the advanced knowledge of mathematics, algorithms and computer languages. It is concerned with the modeling and simulation of complex systems and data processing methods. Computing and artificial intelligence lead to smart systems that are advanced machines designed to fulfill certain specifications. This proceedings book is a collection of papers presented at the first International Conference on Computational Engineering and Intelligent Systems (ICCEIS2021), held online in the period December 10-12, 2021. The collection offers a wide scope of engineering topics, including smart grids, intelligent control, artificial intelligence, optimization, microelectronics and telecommunication systems. The contributions included in this book are of high quality, present details concerning the topics in a succinct way, and can be used as excellent reference and support for readers regarding the field of computational engineering, artificial intelligence and smart system

Model-based fault diagnosis for aerospace systems: a survey

http://pig.sagepub.com/content/early/2012/01/06/0954410011421717International audienceThis survey of model-based fault diagnosis focuses on those methods that are applicable to aerospace systems. To highlight the characteristics of aerospace models, generic nonlinear dynamical modeling from flight mechanics is recalled and a unifying representation of sensor and actuator faults is presented. An extensive bibliographical review supports a description of the key points of fault detection methods that rely on analytical redundancy. The approaches that best suit the constraints of the field are emphasized and recommendations for future developments in in-flight fault diagnosis are provided

UAV or Drones for Remote Sensing Applications in GPS/GNSS Enabled and GPS/GNSS Denied Environments

The design of novel UAV systems and the use of UAV platforms integrated with robotic sensing and imaging techniques, as well as the development of processing workflows and the capacity of ultra-high temporal and spatial resolution data, have enabled a rapid uptake of UAVs and drones across several industries and application domains.This book provides a forum for high-quality peer-reviewed papers that broaden awareness and understanding of single- and multiple-UAV developments for remote sensing applications, and associated developments in sensor technology, data processing and communications, and UAV system design and sensing capabilities in GPS-enabled and, more broadly, Global Navigation Satellite System (GNSS)-enabled and GPS/GNSS-denied environments.Contributions include:UAV-based photogrammetry, laser scanning, multispectral imaging, hyperspectral imaging, and thermal imaging;UAV sensor applications; spatial ecology; pest detection; reef; forestry; volcanology; precision agriculture wildlife species tracking; search and rescue; target tracking; atmosphere monitoring; chemical, biological, and natural disaster phenomena; fire prevention, flood prevention; volcanic monitoring; pollution monitoring; microclimates; and land use;Wildlife and target detection and recognition from UAV imagery using deep learning and machine learning techniques;UAV-based change detection

A Summary of NASA Rotary Wing Research: Circa 20082018

The general public may not know that the first A in NASA stands for Aeronautics. If they do know, they will very likely be surprised that in addition to airplanes, the A includes research in helicopters, tiltrotors, and other vehicles adorned with rotors. There is, arguably, no subsonic air vehicle more difficult to accurately analyze than a vehicle with lift-producing rotors. No wonder that NASA has conducted rotary wing research since the days of the NACA and has partnered, since 1965, with the U.S. Army in order to overcome some of the most challenging obstacles to understanding the behavior of these vehicles. Since 2006, NASA rotary wing research has been performed under several different project names [Gorton et al., 2015]: Subsonic Rotary Wing (SRW) (20062012), Rotary Wing (RW) (20122014), and Revolutionary Vertical Lift Technology (RVLT) (2014present). In 2009, the SRW Project published a report that assessed the status of NASA rotorcraft research; in particular, the predictive capability of NASA rotorcraft tools was addressed for a number of technical disciplines. A brief history of NASA rotorcraft research through 2009 was also provided [Yamauchi and Young, 2009]. Gorton et al. [2015] describes the system studies during 20092011 that informed the SRW/RW/RVLT project investment prioritization and organization. The authors also provided the status of research in the RW Project in engines, drive systems, aeromechanics, and impact dynamics as related to structural dynamics of vertical lift vehicles. Since 2009, the focus of research has shifted from large civil VTOL transports, to environmentally clean aircraft, to electrified VTOL aircraft for the urban air mobility (UAM) market. The changing focus of rotorcraft research has been a reflection of the evolving strategic direction of the NASA Aeronautics Research Mission Directorate (ARMD). By 2014, the project had been renamed the Revolutionary Vertical Lift Technology Project. In response to the 2014 NASA Strategic Plan, ARMD developed six Strategic Thrusts. Strategic Thrust 3B was defined as the Ultra-Efficient Commercial VehiclesVertical Lift Aircraft. Hochstetler et al. [2017] uses Thrust 3B as an example for developing metrics usable by ARMD to measure the effectiveness of each of the Strategic Thrusts. The authors provide near-, mid-, and long-term outcomes for Thrust 3B with corresponding benefits and capabilities. The importance of VTOL research, especially with the rapidly expanding UAM market, eventually resulted in a new Strategic Thrust (to begin in 2020): Thrust 4Safe, Quiet, and Affordable Vertical Lift Air Vehicles. The underlying rotary wing analysis tools used by NASA are still applicable to traditional rotorcraft and have been expanded in capability to accommodate the growing number of VTOL configurations designed for UAM. The top-level goal of the RVLT Project remains unchanged since 2006: Develop and validate tools, technologies and concepts to overcome key barriers for vertical lift vehicles. In 2019, NASA rotary wing/VTOL research has never been more important for supporting new aircraft and advancements in technology. 2 A decade is a reasonable interval to pause and take stock of progress and accomplishments. In 10 years, digital technology has propelled progress in computational efficiency by orders of magnitude and expanded capabilities in measurement techniques. The purpose of this report is to provide a compilation of the NASA rotary wing research from ~2008 to ~2018. Brief summaries of publications from NASA, NASA-funded, and NASA-supported research are provided in 12 chapters: Acoustics, Aeromechanics, Computational Fluid Dynamics (External Flow), Experimental Methods, Flight Dynamics and Control, Drive Systems, Engines, Crashworthiness, Icing, Structures and Materials, Conceptual Design and System Analysis, and Mars Helicopter. We hope this report serves as a useful reference for future NASA vertical lift researchers

Contribution to reliable control of dynamic systems

This thesis presents sorne contributions to the field of Health-Aware Control (HAC) of dynamic systems. In the first part of this thesis, a review of the concepts and methodologies related to reliability versus degradation and fault tolerant control versus health-aware control is presented. Firstly, in an attempt to unify concepts, an overview of HAC, degradation, and reliability modeling including some of the most relevant theoretical and applied contributions is given. Moreover, reliability modeling is formalized and exemplified using the structure function, Bayesian networks (BNs) and Dynamic Bayesian networks (DBNs) as modeling tools in reliability analysis. In addition, some Reliability lmportance Measures (RIMs) are presented. In particular, this thesis develops BNs models for overall system reliability analysis through the use of Bayesian inference techniques. Bayesian networks are powerful tools in system reliability assessment due to their flexibility in modeling the reliability structure of complex systems. For the HAC scheme implementation, this thesis presents and discusses the integration of actuators health information by means of RIMs and degradation in Model Predictive Control (MPC) and Linear Quadratic Regulator algorithms. In the proposed strategies, the cost function parameters are tuned using RIMs. The methodology is able to avoid the occurrence of catastrophic and incipient faults by monitoring the overall system reliability. The proposed HAC strategies are applied to a Drinking Water Network (DWN) and a multirotor UAV system. Moreover, a third approach, which uses MPC and restricts the degradation of the system components is applied to a twin rotor system. Finally, this thesis presents and discusses two reliability interpretations. These interpretations, namely instantaneous and expected, differ in the manner how reliability is evaluated and how its evolution along time is considered. This comparison is made within a HAC framework and studies the system reliability under both approaches.Aquesta tesi presenta algunes contribucions al camp del control basat en la salut dels components "Health-Aware Control" (HAC) de sistemes dinàmics. A la primera part d'aquesta tesi, es presenta una revisió dels conceptes i metodologies relacionats amb la fiabilitat versus degradació, el control tolerant a fallades versus el HAC. En primer lloc, i per unificar els conceptes, s'introdueixen els conceptes de degradació i fiabilitat, models de fiabilitat i de HAC incloent algunes de les contribucions teòriques i aplicades més rellevants. La tesi, a més, el modelatge de la fiabilitat es formalitza i exemplifica utilitzant la funció d'estructura del sistema, xarxes bayesianes (BN) i xarxes bayesianes dinamiques (DBN) com a eines de modelat i anàlisi de la fiabilitat com també presenta algunes mesures d'importància de la fiabilitat (RIMs). En particular, aquesta tesi desenvolupa models de BNs per a l'anàlisi de la fiabilitat del sistema a través de l'ús de tècniques d'inferència bayesiana. Les xarxes bayesianes són eines poderoses en l'avaluació de la fiabilitat del sistema gràcies a la seva flexibilitat en el modelat de la fiabilitat de sistemes complexos. Per a la implementació de l?esquema de HAC, aquesta tesi presenta i discuteix la integració de la informació sobre la salut i degradació dels actuadors mitjançant les RIMs en algoritmes de control predictiu basat en models (MPC) i control lineal quadràtic (LQR). En les estratègies proposades, els paràmetres de la funció de cost s'ajusten utilitzant els RIMs. Aquestes tècniques de control fiable permetran millorar la disponibilitat i la seguretat dels sistemes evitant l'aparició de fallades a través de la incorporació d'aquesta informació de la salut dels components en l'algoritme de control. Les estratègies de HAC proposades s'apliquen a una xarxa d'aigua potable (DWN) i a un sistema UAV multirrotor. A més, un tercer enfocament fent servir la degradació dels actuadors com a restricció dins l'algoritme de control MPC s'aplica a un sistema aeri a dos graus de llibertat (TRMS). Finalment, aquesta tesi també presenta i discuteix dues interpretacions de la fiabilitat. Aquestes interpretacions, nomenades instantània i esperada, difereixen en la forma en què s'avalua la fiabilitat i com es considera la seva evolució al llarg del temps. Aquesta comparació es realitza en el marc del control HAC i estudia la fiabilitat del sistema en tots dos enfocaments.Esta tesis presenta algunas contribuciones en el campo del control basado en la salud de los componentes “Health-Aware Control” (HAC) de sistemas dinámicos. En la primera parte de esta tesis, se presenta una revisión de los conceptos y metodologíasrelacionados con la fiabilidad versus degradación, el control tolerante a fallos versus el HAC. En primer lugar, y para unificar los conceptos, se introducen los conceptos de degradación y fiabilidad, modelos de fiabilidad y de HAC incluyendo algunas de las contribuciones teóricas y aplicadas más relevantes. La tesis, demás formaliza y ejemplifica el modelado de fiabilidad utilizando la función de estructura del sistema, redes bayesianas (BN) y redes bayesianas diná-micas (DBN) como herramientas de modelado y análisis de fiabilidad como también presenta algunas medidas de importancia de la fiabilidad (RIMs). En particular, esta tesis desarrolla modelos de BNs para el análisis de la fiabilidad del sistema a través del uso de técnicas de inferencia bayesiana. Las redes bayesianas son herramientas poderosas en la evaluación de la fiabilidad del sistema gracias a su flexibilidad en el modelado de la fiabilidad de sistemas complejos. Para la implementación del esquema de HAC, esta tesis presenta y discute la integración de la información sobre la salud y degradación de los actuadores mediante las RIMs en algoritmos de control predictivo basado en modelos (MPC) y del control cuadrático lineal (LQR). En las estrategias propuestas, los parámetros de la función de coste se ajustan utilizando las RIMs. Estas técnicas de control fiable permitirán mejorar la disponibilidad y la seguridad de los sistemas evitando la aparición de fallos a través de la incorporación de la información de la salud de los componentes en el algoritmo de control. Las estrategias de HAC propuestas se aplican a una red de agua potable (DWN) y a un sistema UAV multirotor. Además, un tercer enfoque que usa la degradación de los actuadores como restricción en el algoritmo de control MPC se aplica a un sistema aéreo con dos grados de libertad (TRMS). Finalmente, esta tesis también presenta y discute dos interpretaciones de la fiabilidad. Estas interpretaciones, llamadas instantánea y esperada, difieren en la forma en que se evalúa la fiabilidad y cómo se considera su evolución a lo largo del tiempo. Esta comparación se realiza en el marco del control HAC y estudia la fiabilidad del sistema en ambos enfoques

Contribution to reliable control of dynamic systems

Aplicat embargament des de la data de defensa fins al maig 2020This thesis presents sorne contributions to the field of Health-Aware Control (HAC) of dynamic systems. In the first part of this thesis, a review of the concepts and methodologies related to reliability versus degradation and fault tolerant control versus health-aware control is presented. Firstly, in an attempt to unify concepts, an overview of HAC, degradation, and reliability modeling including some of the most relevant theoretical and applied contributions is given. Moreover, reliability modeling is formalized and exemplified using the structure function, Bayesian networks (BNs) and Dynamic Bayesian networks (DBNs) as modeling tools in reliability analysis. In addition, some Reliability lmportance Measures (RIMs) are presented. In particular, this thesis develops BNs models for overall system reliability analysis through the use of Bayesian inference techniques. Bayesian networks are powerful tools in system reliability assessment due to their flexibility in modeling the reliability structure of complex systems. For the HAC scheme implementation, this thesis presents and discusses the integration of actuators health information by means of RIMs and degradation in Model Predictive Control (MPC) and Linear Quadratic Regulator algorithms. In the proposed strategies, the cost function parameters are tuned using RIMs. The methodology is able to avoid the occurrence of catastrophic and incipient faults by monitoring the overall system reliability. The proposed HAC strategies are applied to a Drinking Water Network (DWN) and a multirotor UAV system. Moreover, a third approach, which uses MPC and restricts the degradation of the system components is applied to a twin rotor system. Finally, this thesis presents and discusses two reliability interpretations. These interpretations, namely instantaneous and expected, differ in the manner how reliability is evaluated and how its evolution along time is considered. This comparison is made within a HAC framework and studies the system reliability under both approaches.Aquesta tesi presenta algunes contribucions al camp del control basat en la salut dels components "Health-Aware Control" (HAC) de sistemes dinàmics. A la primera part d'aquesta tesi, es presenta una revisió dels conceptes i metodologies relacionats amb la fiabilitat versus degradació, el control tolerant a fallades versus el HAC. En primer lloc, i per unificar els conceptes, s'introdueixen els conceptes de degradació i fiabilitat, models de fiabilitat i de HAC incloent algunes de les contribucions teòriques i aplicades més rellevants. La tesi, a més, el modelatge de la fiabilitat es formalitza i exemplifica utilitzant la funció d'estructura del sistema, xarxes bayesianes (BN) i xarxes bayesianes dinamiques (DBN) com a eines de modelat i anàlisi de la fiabilitat com també presenta algunes mesures d'importància de la fiabilitat (RIMs). En particular, aquesta tesi desenvolupa models de BNs per a l'anàlisi de la fiabilitat del sistema a través de l'ús de tècniques d'inferència bayesiana. Les xarxes bayesianes són eines poderoses en l'avaluació de la fiabilitat del sistema gràcies a la seva flexibilitat en el modelat de la fiabilitat de sistemes complexos. Per a la implementació de l?esquema de HAC, aquesta tesi presenta i discuteix la integració de la informació sobre la salut i degradació dels actuadors mitjançant les RIMs en algoritmes de control predictiu basat en models (MPC) i control lineal quadràtic (LQR). En les estratègies proposades, els paràmetres de la funció de cost s'ajusten utilitzant els RIMs. Aquestes tècniques de control fiable permetran millorar la disponibilitat i la seguretat dels sistemes evitant l'aparició de fallades a través de la incorporació d'aquesta informació de la salut dels components en l'algoritme de control. Les estratègies de HAC proposades s'apliquen a una xarxa d'aigua potable (DWN) i a un sistema UAV multirrotor. A més, un tercer enfocament fent servir la degradació dels actuadors com a restricció dins l'algoritme de control MPC s'aplica a un sistema aeri a dos graus de llibertat (TRMS). Finalment, aquesta tesi també presenta i discuteix dues interpretacions de la fiabilitat. Aquestes interpretacions, nomenades instantània i esperada, difereixen en la forma en què s'avalua la fiabilitat i com es considera la seva evolució al llarg del temps. Aquesta comparació es realitza en el marc del control HAC i estudia la fiabilitat del sistema en tots dos enfocaments.Esta tesis presenta algunas contribuciones en el campo del control basado en la salud de los componentes “Health-Aware Control” (HAC) de sistemas dinámicos. En la primera parte de esta tesis, se presenta una revisión de los conceptos y metodologíasrelacionados con la fiabilidad versus degradación, el control tolerante a fallos versus el HAC. En primer lugar, y para unificar los conceptos, se introducen los conceptos de degradación y fiabilidad, modelos de fiabilidad y de HAC incluyendo algunas de las contribuciones teóricas y aplicadas más relevantes. La tesis, demás formaliza y ejemplifica el modelado de fiabilidad utilizando la función de estructura del sistema, redes bayesianas (BN) y redes bayesianas diná-micas (DBN) como herramientas de modelado y análisis de fiabilidad como también presenta algunas medidas de importancia de la fiabilidad (RIMs). En particular, esta tesis desarrolla modelos de BNs para el análisis de la fiabilidad del sistema a través del uso de técnicas de inferencia bayesiana. Las redes bayesianas son herramientas poderosas en la evaluación de la fiabilidad del sistema gracias a su flexibilidad en el modelado de la fiabilidad de sistemas complejos. Para la implementación del esquema de HAC, esta tesis presenta y discute la integración de la información sobre la salud y degradación de los actuadores mediante las RIMs en algoritmos de control predictivo basado en modelos (MPC) y del control cuadrático lineal (LQR). En las estrategias propuestas, los parámetros de la función de coste se ajustan utilizando las RIMs. Estas técnicas de control fiable permitirán mejorar la disponibilidad y la seguridad de los sistemas evitando la aparición de fallos a través de la incorporación de la información de la salud de los componentes en el algoritmo de control. Las estrategias de HAC propuestas se aplican a una red de agua potable (DWN) y a un sistema UAV multirotor. Además, un tercer enfoque que usa la degradación de los actuadores como restricción en el algoritmo de control MPC se aplica a un sistema aéreo con dos grados de libertad (TRMS). Finalmente, esta tesis también presenta y discute dos interpretaciones de la fiabilidad. Estas interpretaciones, llamadas instantánea y esperada, difieren en la forma en que se evalúa la fiabilidad y cómo se considera su evolución a lo largo del tiempo. Esta comparación se realiza en el marco del control HAC y estudia la fiabilidad del sistema en ambos enfoques.Postprint (published version