Advances in Optofluidics

Optofluidics a niche research field that integrates optics with microfluidics. It started with elegant demonstrations of the passive interaction of light and liquid media such as liquid waveguides and liquid tunable lenses. Recently, the optofluidics continues the advance in liquid-based optical devices/systems. In addition, it has expanded rapidly into many other fields that involve lightwave (or photon) and liquid media. This Special Issue invites review articles (only review articles) that update the latest progress of the optofluidics in various aspects, such as new functional devices, new integrated systems, new fabrication techniques, new applications, etc. It covers, but is not limited to, topics such as micro-optics in liquid media, optofluidic sensors, integrated micro-optical systems, displays, optofluidics-on-fibers, optofluidic manipulation, energy and environmental applciations, and so on

Optical Gas Sensing: Media, Mechanisms and Applications

Optical gas sensing is one of the fastest developing research areas in laser spectroscopy. Continuous development of new coherent light sources operating especially in the Mid-IR spectral band (QCL—Quantum Cascade Lasers, ICL—Interband Cascade Lasers, OPO—Optical Parametric Oscillator, DFG—Difference Frequency Generation, optical frequency combs, etc.) stimulates new, sophisticated methods and technological solutions in this area. The development of clever techniques in gas detection based on new mechanisms of sensing (photoacoustic, photothermal, dispersion, etc.) supported by advanced applied electronics and huge progress in signal processing allows us to introduce more sensitive, broader-band and miniaturized optical sensors. Additionally, the substantial development of fast and sensitive photodetectors in MIR and FIR is of great support to progress in gas sensing. Recent material and technological progress in the development of hollow-core optical fibers allowing low-loss transmission of light in both Near- and Mid-IR has opened a new route for obtaining the low-volume, long optical paths that are so strongly required in laser-based gas sensors, leading to the development of a novel branch of laser-based gas detectors. This Special Issue summarizes the most recent progress in the development of optical sensors utilizing novel materials and laser-based gas sensing techniques

Study, analysis and experimental validation of fiber refractometers based on single-mode, multimode and photonic crystal fibers for refractive index measurements with application for the detection of methane

Refractive index measurement has been studied since Ernest Abbé initially designed a refractometer in 1869, which is named the Abbé refractometer. Since then, numerous types of refractometers have been developed by employing either the optical prism-based refractometer or the optical fiber-based refractometer, due to their wide-ranging applications such as for sensingvarious physical, biological and chemical parameters. Recently, a large number of researchers have been developing refractometers based on optical fibers, exploiting mechanisms such as surface plasmon resonance (SPR), multimode interference, fiber Bragg gratings (FBG), long period gratings (LPG), tapered optical fibers, and striped-cladding multimode fibers (MMF), for their advantages in immunity against electromagnetic interference, electrical passivity at the sensing probe, and capability to long term in-situ measurement. This thesis concerns the development of comprehensively functional and accurate models for optical fiber refractometers based on optical intensity modulation, in particular for stripped-cladding MMF refractometry as well as hybrid systems involving a combination of single-mode-multimode fiber refractometery and the all-fiber hybrid refractometer using photonic crystal fibers. A key objective of this work is to characterize the performance of these intensity-based optical fiber refractometers in terms of their power response, sensitivity, resolution, and dynamic range. The simulation results which are corroborated experimentally demonstrate very high sensitivity being obtained in Zone II (i.e. the sensing regime typically employed for measuring a sensing medium index higher than the cladding index but less than or equal to the core index) for all three types of refractometers. However, the sensitivity in Zone III (i.e. the sensing regime for which the sensing medium index is higher than the core index) is very low. A hybrid single-mode fiber - multimode fiber configuration is used to improve the sensitivity in Zone III. On other hand, the sensitivity for Zone I (i.e. the sensing regime typically employed for measuring a sensing medium index lower than the cladding index) has been improved by increasing evanescent wave absorption using the all-fiber hybrid refractometer based on solid-core photonic crystal fibers. As a further potential of the fiber refractometer for applications in biochemical sensing, the proof-of-concept for a methane gas sensor has been demonstrated using supramolecular cryptophane-A which enables to trap the methane molecules. Cryptophane-A incorporated into a functionalized film of StyreneAcrylonitrile (SAN) host is applied to a de-cladded region of the sensor as the sensitive region. The refractive index of this functionalized layer increases proportionally with increasing methane concentration, subsequently inducing variations in the transmitted optical power along the fiber sensor

Label-free mapping of near-field transport properties of micro/nano-fluidic phenomena using surface plasmon resonance (SPR) reflectance imaging

My doctoral research has focused on the development of surface plasmon resonance (SPR) reflectance imaging technique to detect near-field transport properties such as concentration, temperature, and salinity in micro/nano fluidic phenomena in label-free, real-time, and full-field manner. A label-free visualization technique based on surface plasmon resonance (SPR) reflectance sensing is presented for real-time and full-field mapping of microscale concentration and temperature fields. The key idea is that the SPR reflectance sensitivity varies with the refractive index of the near-wall region of the test mixture fluid. The Fresnel equation, based on Kretschmann’s theory, correlates the SPR reflectance with the refractive index of the test medium, and then, the refractive index correlates with the mixture concentration or temperature. The basic operation principle is summarized and the laboratory-developed SPR imaging/analyzing system is described with the measurement sensitivity, uncertainties and detection limitations of the implemented SPR reflectance imaging. Total five proposed uses of SPR reflectance imaging technique are presented: (1) micromixing concentration field development of ethanol penetrating into water contained in a micro-channel, (2) full-field detection of the near-wall salinity profiles for convective/diffusion of saline droplet into water, (3) full-field and real-time surface plasmon resonance imaging thermometry, (4) correlation of near-field refractive index of nanofluids with surface plasmon resonance reflectance, and (5) unveiling hidden complex cavities formed during nanocrystalline self-assembly

Sensores em POF baseados em intensidade para a avaliação da qualidade de águas

Nowadays there is the need for low-cost and user-friendly solutions for water quality assessment which can allow for remote, in-site and real-time monitoring of water contaminants. POF sensing technologies combined with specially developed sensitive layers for chemical detection may offer these possibilities, with proper interrogation systems. POF sensing platforms based on low-cost procedures were developed and characterized using aqueous solutions of different refractive indices (RI). The POF RI sensors were optimized by varying the length and/or roughness of the sensing region. The suitability of these sensing platforms for chemical detection was evaluated through the coating with sensitive layers, namely molecularly imprinted polymers (MIPs) using different deposition techniques. The dependency of proteins immobilization on the POF’s surface was evaluated aiming future developments in chemical detection using POF biosensors. A D-shaped POF chemical sensor was successfully developed using a sensitive MIP layer, allowing the detection of perfluorooctanoate (POFA/PFO-) in aqueous media with a limit of detection of 0.20 – 0.28 ppb. The collaboration of researchers from different areas was essential for the success of the developed work.Hoje em dia há uma necessidade de soluções simples e de baixo custo para a avaliação da qualidade de águas e que permitam a monitorização remota de contaminantes, no local e em tempo real. As tecnologias baseadas em POF podem oferecer essa possibilidade através de sistemas de interrogação óptica adequados, combinados com camadas sensíveis especialmente desenvolvidas para detecção química. As plataformas ópticas baseadas em POF foram desenvolvidas e caracterizadas com soluções aquosas com diferentes índices de refracção. Os sensores foram optimizados através da variação do comprimento e/ou rugosidade da região sensível. A capacidade de detecção química das plataformas ópticas desenvolvidas foi avaliada através do revestimento com camadas sensíveis, nomeadamente polímeros molecularmente impressos (PMI), utilizando diferentes técnicas de deposição. A dependência da imobilização de proteínas na superfície de POFs modificadas foi avaliada com o objectivo de desenvolver biossensores para detecção química. Um sensor POF para detecção química, em configuração D-shape, foi desenvolvido com sucesso através do revestimento com um PMI, permitindo a detecção de perfluorooctanoato (POFA/PFO-) em soluções aquosas com um limite de detecção entre 0.20 – 0.28 ppb. A colaboração com investigadores de diferentes áreas foi essencial para o sucesso do trabalho desenvolvido.Programa Doutoral em Engenharia Físic

Integrated dye lasers for all-polymer photonic Lab-on-a-Chip systems

Basierend auf integrierten Farbstofflasern wurden zwei optische Lab-on-a-Chip Systeme entwickelt. Zur effizienten Anregung von Fluoreszenzmarkern wurden optofluidische Farbstofflaser mit verteilter Rückkopplung (DFB Laser) untersucht. Für die markerfreie Moleküldetektion wurden Mikrokelchlaser entwickelt, die auf Flüstergaleriemoden basieren. Besonderes Augenmerk lag auf einer möglichen Großserienfertigung der Chips als kostengünstige Einwegartikel und auf einer einfachen Handhabung

Design and fabrication of optical fibre long period gratings for CO₂ sensing

This thesis investigated the repeatability of the overwrite long period grating (LPG) fabrication method and highlighted the advantage it offers in its ability to tune spectral features thus allowing the manufacture of bespoke sensors. Moreover, LPGs with periods ranging from 100 - 200 μm were written and a novel technique for mapping the transmission data was presented. This method gave a unique overview into the period mediated evolution of attenuation features, which, when designing LPGs that operate at the sensitive phase matching turning point, is invaluable. Further exploration into the overwrite method revealed that the UV irradiation duty cycle used in the fabrication of LPGs was found to influence the presence of harmonics, where a duty cycle of 25% maximised coupling to 2nd order transmission features. LPGs which possessed these additional spectral features within a small wavelength range (600 - 1000 nm) were assessed for their suitability in performing multi-parameter sensing. Ionic liquids were explored as an LPG COThis thesis investigated the repeatability of the overwrite long period grating (LPG) fabrication method and highlighted the advantage it offers in its ability to tune spectral features thus allowing the manufacture of bespoke sensors. Moreover, LPGs with periods ranging from 100 - 200 μm were written and a novel technique for mapping the transmission data was presented. This method gave a unique overview into the period mediated evolution of attenuation features, which, when designing LPGs that operate at the sensitive phase matching turning point, is invaluable. Further exploration into the overwrite method revealed that the UV irradiation duty cycle used in the fabrication of LPGs was found to influence the presence of harmonics, where a duty cycle of 25% maximised coupling to 2nd order transmission features. LPGs which possessed these additional spectral features within a small wavelength range (600 - 1000 nm) were assessed for their suitability in performing multi-parameter sensing. Ionic liquids were explored as an LPG COThis thesis investigated the repeatability of the overwrite long period grating (LPG) fabrication method and highlighted the advantage it offers in its ability to tune spectral features thus allowing the manufacture of bespoke sensors. Moreover, LPGs with periods ranging from 100 - 200 μm were written and a novel technique for mapping the transmission data was presented. This method gave a unique overview into the period mediated evolution of attenuation features, which, when designing LPGs that operate at the sensitive phase matching turning point, is invaluable. Further exploration into the overwrite method revealed that the UV irradiation duty cycle used in the fabrication of LPGs was found to influence the presence of harmonics, where a duty cycle of 25% maximised coupling to 2nd order transmission features. LPGs which possessed these additional spectral features within a small wavelength range (600 - 1000 nm) were assessed for their suitability in performing multi-parameter sensing. Ionic liquids were explored as an LPG CO₂ sensitive coating. It was shown that these materials demonstrate a refractive index change upon exposure to CO₂ which was maintained following mechanical stabilisation using a gelling agent. A coating system for applying the gelled ionic liquid to the surface of an optical fibre was developed and techniques to improve the coating deposition were explored. The sensor demonstrated an 8 nm wavelength shift in response to 20% CO₂, which was reversible by reducing the partial pressure of CO₂ for 25 min.sensitive coating. It was shown that these materials demonstrate a refractive index change upon exposure to CO₂ which was maintained following mechanical stabilisation using a gelling agent. A coating system for applying the gelled ionic liquid to the surface of an optical fibre was developed and techniques to improve the coating deposition were explored. The sensor demonstrated an 8 nm wavelength shift in response to 20% CO₂, which was reversible by reducing the partial pressure of CO₂ for 25 min. sensitive coating. It was shown that these materials demonstrate a refractive index change upon exposure to CO₂ which was maintained following mechanical stabilisation using a gelling agent. A coating system for applying the gelled ionic liquid to the surface of an optical fibre was developed and techniques to improve the coating deposition were explored. The sensor demonstrated an 8 nm wavelength shift in response to 20% CO₂, which was reversible by reducing the partial pressure of CO₂ for 25 min

Novel Specialty Optical Fibers and Applications

Novel Specialty Optical Fibers and Applications focuses on the latest developments in specialty fiber technology and its applications. The aim of this reprint is to provide an overview of specialty optical fibers in terms of their technological developments and applications. Contributions include:1. Specialty fibers composed of special materials for new functionalities and applications in new spectral windows.2. Hollow-core fiber-based applications.3. Functionalized fibers.4. Structurally engineered fibers.5. Specialty fibers for distributed fiber sensors.6. Specialty fibers for communications

On-chip optical sensors

Adding more functionality to chips is an important trend in the advancement of technology. During the past couple of decades, integrated circuit developments have focused on keeping Moore\u27s Law alive More of Moore . Moore\u27s law predicts the doubling of the number of transistors on an integrated circuit every year. My research objectives revolve around More than Moore , where different functionalities are sought to be integrated on chip. Sensing in particular is becoming of paramount importance in a variety of applications. Booming healthcare costs can be reduced with early diagnosis, which requires improved sensitivity and lower cost. To halt global warming, environmental monitoring requires miniature gas sensors that are cheap enough to be deployed at mass scale. First, we explore a novel silicon waveguide platform that is expected to perform well as a sensor in comparison to the conventional 220 nm thick waveguide. 50 and 70 nm shallow silicon waveguides have the advantage of easier lithography than conventional 220 nm thick waveguides due to the large minimum feature size required of 1 µm. 1 µm wide waveguides in these shallow platforms are single mode. A multi-mode interference device is designed in this platform to function as the smallest MMI sensor, giving sensitivity of 427 nm / refractive index unit (RIU) at a length of 4 mm. The silicon photonic MMI sensor is based on detecting refractive index changes. Refractometric techniques such as the MMI sensor require surface functionalization to achieve selectivity or specificity. Spectroscopic methods, usually reserved for material characterization in a research setting, can be adapted for highly specific label-free sensing. Chapter 4 explores the use of a highly doped III-V semiconductor for on chip infrared spectroscopy. Finite element method and finite different time domain were both used to design a plasmonic slot waveguide for gas sensing. On chip lasers and detectors have been designed using InAs. While InAs is still considered more expensive than silicon, the electronics industry expects to start incorporating more materials in standard fabrication processes, including III-V semiconductors for their superior properties including mobility. Thus, experimental realization of this sensor is feasible. A drawback with infrared spectroscopy is that it is difficult to use with biological fluids. Chapter 5 explores the use of Raman spectroscopy as a sensing method. To adapt Raman spectroscopy for sensing, the most important task is to enhance the Raman signal. The way the Raman signal is generated means that the number of photons is generally very low and usually bulk material or concentrated fluids are used as samples. To measure low concentrations of a probe molecule, the probe molecule is placed on a surface enhanced Raman spectroscopy (SERS) substrate. A typical SERS substrate is composed of metal nanostructures for their surface plasmon resonance property, which causes a large amplification in the electric field in particular hot spots. By decorated silicon nanowires with silver nanoparticles, an enhancement factor of 1011 was realized and picomolar concentrations of pyridine were detected using Raman spectroscopy. In conclusion, this thesis provides new concepts and foundations in three directions that are all important for on chip optical sensing. First, silicon photonics is the technology of choice that is nearest to the market and a multi-mode interference sensor based on shallow silicon waveguides was designed. Further work can explore how to cascade such MMIs to increase sensitivity without sacrificing the free spectral range. Second, infrared plasmonics is a promising technology. Before semiconductor plasmonics, on chip devices operated in the visible or near IR and then microwave region of the electromagnetic spectrum. By using highly doped semiconductors, it is possible to bridge the gap and operate with mid-infrared wavelengths. The implications are highlighted by designing a waveguide platform that can be used for next generation on chip infrared spectroscopy. Third, Raman spectroscopy was exploited as a sensing technique by experimental realization of a SERS substrate using equipment-free fabrication methods