MODELING AND SPICE IMPLEMENTATION OF SILICON-ON-INSULATOR (SOI) FOUR GATE (G4FET) TRANSISTOR

As the device dimensions have reduced from micrometer to nanometer range, new bulk silicon devices are now facing many undesirable effects of scaling leading device engineers to look for new process technologies. Silicon-on-insulator (SOI) has emerged as a very promising candidate for resolving the major problems plaguing the bulk silicon technology. G4FET [G4FET] is a SOI transistor with four independent gates. Although G4FET has already shown great potential in different applications, the widespread adoption of a technology in circuit design is heavily dependent upon good SPICE (Simulation Program with Integrated Circuit Emphasis) models. CAD (Computer Aided Design) tools are now ubiquitous in circuit design and a fast, robust and accurate SPICE model is absolutely necessary to transform G4FET into a mainstream technology. The research goal is to develop suitable SPICE models for G4FET to aid circuit designers in designing innovative analog and digital circuits using this new transistor. The first phase of this work is numerical modeling of the G4FET where four different numerical techniques are implemented, each with its merits and demerits. The first two methods are based on multivariate Lagrange interpolation and multidimensional Bernstein polynomial. The third numerical technique is based on multivariate regression polynomial to aid modeling with dense gridded data. Another suitable alternative namely multidimensional linear and cubic spline interpolation is explored as the fourth numerical modeling approach to solve some of the problems resulting from single polynomial approximation. The next phase of modeling involves developing a macromodel combining already existing SPICE models of MOSFET (metal–oxide–semiconductor field-effect transistor) and JFET (junction-gate field-effect transistor). This model is easy to implement in circuit simulators and provides good results compared to already demonstrated experimental works with innovative G4FET circuits. The final phase of this work involves the development of a physics-based compact model of G4FET with some empirical fitting parameters. A model for depletion-all-around operation is implemented in circuit simulator based on previous work. Another simplified model, combining MOS and JFET action, is implemented in circuit simulator to model the accumulation mode operation of G4FET

Data Conversion Within Energy Constrained Environments

Within scientific research, engineering, and consumer electronics, there is a multitude of new discrete sensor-interfaced devices. Maintaining high accuracy in signal quantization while staying within the strict power-budget of these devices is a very challenging problem. Traditional paths to solving this problem include researching more energy-efficient digital topologies as well as digital scaling.;This work offers an alternative path to lower-energy expenditure in the quantization stage --- content-dependent sampling of a signal. Instead of sampling at a constant rate, this work explores techniques which allow sampling based upon features of the signal itself through the use of application-dependent analog processing. This work presents an asynchronous sampling paradigm, based off the use of floating-gate-enabled analog circuitry. The basis of this work is developed through the mathematical models necessary for asynchronous sampling, as well the SPICE-compatible models necessary for simulating floating-gate enabled analog circuitry. These base techniques and circuitry are then extended to systems and applications utilizing novel analog-to-digital converter topologies capable of leveraging the non-constant sampling rates for significant sample and power savings

Design and modelling of CMOS operational amplifiers.

by Chung-Yuk Or.Thesis (M.Phil.)--Chinese University of Hong Kong, 1998.Includes bibliographical references (leaves 95-[98]).Abstract also in Chinese.Chapter 1 --- Introduction --- p.1Chapter 2 --- Fully Differential CMOS Operational Amplifier Design --- p.4Chapter 2.1 --- Wide-Swing Current Mirror --- p.5Chapter 2.2 --- Wide-Swing Biasing Network --- p.8Chapter 2.3 --- Fully differential folded-cascode operational amplifier --- p.13Chapter 2.3.1 --- Small-Signal Analysis --- p.16Chapter 2.4 --- Gain-boost technique --- p.18Chapter 2.4.1 --- Frequency Response --- p.24Chapter 2.5 --- Common-Mode Feedback Network --- p.26Chapter 2.5.1 --- Continuous-Time CMFB Circuit --- p.27Chapter 2.5.2 --- Discrete-Time CMFB circuit --- p.33Chapter 2.6 --- Design Flow of the Operational Amplifier --- p.35Chapter 3 --- Physical Design of the Operational Amplifier --- p.39Chapter 3.1 --- Layout Level Design --- p.40Chapter 3.2 --- Layout Techniques --- p.42Chapter 3.3 --- Input Protection Circuitry --- p.47Chapter 4 --- Simulation Results --- p.49Chapter 4.1 --- Simulation of the Operational Amplifier --- p.49Chapter 4.2 --- Simulation of Auxiliary Amplifiers --- p.57Chapter 4.3 --- Simulation of the Common-Mode Feedback Circuit --- p.62Chapter 5 --- Measurement Results --- p.70Chapter 5.1 --- Transient Response Measurement --- p.70Chapter 5.2 --- Frequency Response Measurement --- p.74Chapter 5.3 --- Power Consumption Measurement --- p.78Chapter 5.4 --- Performance Evaluation --- p.81Chapter 6 --- Layout Driven Operational Amplifiers Macromodelling --- p.82Chapter 6.1 --- Motivations --- p.83Chapter 6.2 --- Methodology --- p.84Chapter 6.3 --- Macromodelling the operational amplifier --- p.85Chapter 6.4 --- Simulation Results --- p.88Chapter 6.5 --- Conclusions --- p.92Chapter 7 --- Conclusions --- p.93Bibliography --- p.95A Layout Diagrams and Chip Micrograph --- p.9

34th Midwest Symposium on Circuits and Systems-Final Program

Organized by the Naval Postgraduate School Monterey California. Cosponsored by the IEEE Circuits and Systems Society. Symposium Organizing Committee: General Chairman-Sherif Michael, Technical Program-Roberto Cristi, Publications-Michael Soderstrand, Special Sessions- Charles W. Therrien, Publicity: Jeffrey Burl, Finance: Ralph Hippenstiel, and Local Arrangements: Barbara Cristi

Robust low power CMOS methodologies for ISFETs instrumentation

I have developed a robust design methodology in a 0.18 [Mu]m commercial CMOS process to circumvent the performance issues of the integrated Ions Sensitive Field Effect Transistor (ISFET) for pH detection. In circuit design, I have developed frequency domain signal processing, which transforms pH information into a frequency modulated signal. The frequency modulated signal is subsequently digitized and encoded into a bit-stream of data. The architecture of the instrumentation system consists of a) A novel front-end averaging amplifier to interface an array of ISFETs for converting pH into a voltage signal, b) A high linear voltage controlled oscillator for converting the voltage signal into a frequency modulated signal, and c) Digital gates for digitizing and differentiating the frequency modulated signal into an output bit-stream. The output bit stream is indistinguishable to a 1st order sigma delta modulation, whose noise floor is shaped by +20dB/decade. The fabricated instrumentation system has a dimension of 1565 [Mu] m 1565 [Mu] m. The chip responds linearly to the pH in a chemical solution and produces a digital output, with up to an 8-bit accuracy. Most importantly, the fabricated chips do not need any post-CMOS processing for neutralizing any trapped-charged effect, which can modulate on-chip ISFETs’ threshold voltages into atypical values. As compared to other ISFET-related works in the literature, the instrumentation system proposed in this thesis can cope with the mismatched ISFETs on chip for analogue-to-digital conversions. The design methodology is thus very accurate and robust for chemical sensing

Custom Integrated Circuits

Contains reports on nine research projects.Analog Devices, Inc.International Business Machines, Inc.Joint Services Electronics Program (Contract DAALO03-86-K-0002)U.S. Air Force - Office of Scientific Research (Grant AFOSR 86-0164)Rockwell International CorporationOKI SemiconductorU.S. Navy - Office of Naval Research (Contract N00014-81-K-0742)Charles Stark Draper LaboratoryDARPA/U.S. Navy - Office of Naval Research (Contract N00014-80-C-0622)DARPA/U.S. Navy - Office of Naval Research (Contract N00014-87-K-0825)National Science Foundation (Grant ECS-83-10941)AT&T Bell Laboratorie

Design considerations for integrated continuous-time chaotic oscillators

This paper presents an optimization procedure to choose the chaotic state equation which is best suited for implementation using Gm-C integrated circuit techniques. The paper also presents an analysis of the most significant hardware nonidealities of Gm-C circuits on the chaotic operation-the basis to design robust integrated circuits with reproducible and easily controllable behavior. The techniques in the paper are illustrated through a circuit fabricated in 2.4-/iin double-poly technology.Comisión Interministerial de Ciencia y Tecnología TIC 96-1392-CO2-

Nonlinearity and noise modeling of operational transconductance amplifiers for continuous time analog filters

A general framework for performance optimization of continuous-time OTA-C (Operational Transconductance Amplifier-Capacitor) filters is proposed. Efficient procedures for evaluating nonlinear distortion and noise valid for any filter of arbitrary order are developed based on the matrix description of a general OTA-C filter model . Since these procedures use OTA macromodels, they can be used to obtain the results significantly faster than transistor-level simulation. In the case of transient analysis, the speed-up may be as much as three orders of magnitude without almost no loss of accuracy. This makes it possible to carry out direct numerical optimization of OTA-C filters with respect to important characteristics such as noise performance, THD, IM3, DR or SNR. On the other hand, the general OTA-C filter model allows us to apply matrix transforms that manipulate (rescale) filter element values and/or change topology without changing its transfer function. The above features are a basis to build automated optimization procedures for OTA-C filters. In particular, a systematic optimization procedure using equivalence transformations is proposed. The research also proposes suitable software implementations of the optimization process. The first part of the research proposes a general performance optimization procedure and to verify the process two application type examples are mentioned. An application example of the proposed approach to optimal block sequencing and gain distribution of 8th order cascade Butterworth filter (for two variants of OTA topologies) is given. Secondly the modeling tool is used to select the best suitable topology for a 5th order Bessel Low Pass Filter. Theoretical results are verified by comparing to transistor-level simulation withCADENCE. For the purpose of verification, the filters have also been fabricated in standard 0.5mm CMOS process. The second part of the research proposes a new linearization technique to improve the linearity of an OTA using an Active Error Feedforward technique. Most present day applications require very high linear circuits combined with low noise and low power consumption. An OTA based biquad filter has also been fabricated in 0.35mm CMOS process. The measurement results for the filter and the stand alone OTA have been discussed. The research focuses on these issues

Parameterized macromodeling of passive and active dynamical systems

L'abstract è presente nell'allegato / the abstract is in the attachmen