An interferometric phase noise reduction method based on modified denoising convolutional neural network

Traditional interferometric synthetic aperture radar (InSAR) denoising methods normally try to estimate the phase fringes directly from the noisy interferogram. Since the statistics of phase noise are more stable than the phase corresponding to complex terrain, it could be easier to estimate the phase noise. In this paper, phase noises rather than phase fringes are estimated first, and then they are subtracted from the noisy interferometric phase for denoising. The denoising convolutional neural network (DnCNN) is introduced to estimate phase noise and then a modified network called IPDnCNN is constructed for the problem. Based on the IPDnCNN, a novel interferometric phase noise reduction algorithm is proposed, which can reduce phase noise while protecting fringe edges and avoid the use of filter windows. Experimental results using simulated and real data are provided to demonstrate the effectiveness of the proposed method

Improved Goldstein Interferogram Filter Based on Local Fringe Frequency Estimation

The quality of an interferogram, which is limited by various phase noise, will greatly affect the further processes of InSAR, such as phase unwrapping. Interferometric SAR (InSAR) geophysical measurements’, such as height or displacement, phase filtering is therefore an essential step. In this work, an improved Goldstein interferogram filter is proposed to suppress the phase noise while preserving the fringe edges. First, the proposed adaptive filter step, performed before frequency estimation, is employed to improve the estimation accuracy. Subsequently, to preserve the fringe characteristics, the estimated fringe frequency in each fixed filtering patch is removed from the original noisy phase. Then, the residual phase is smoothed based on the modified Goldstein filter with its parameter alpha dependent on both the coherence map and the residual phase frequency. Finally, the filtered residual phase and the removed fringe frequency are combined to generate the filtered interferogram, with the loss of signal minimized while reducing the noise level. The effectiveness of the proposed method is verified by experimental results based on both simulated and real data

An Unsupervised Generative Neural Approach for InSAR Phase Filtering and Coherence Estimation

Phase filtering and pixel quality (coherence) estimation is critical in producing Digital Elevation Models (DEMs) from Interferometric Synthetic Aperture Radar (InSAR) images, as it removes spatial inconsistencies (residues) and immensely improves the subsequent unwrapping. Large amount of InSAR data facilitates Wide Area Monitoring (WAM) over geographical regions. Advances in parallel computing have accelerated Convolutional Neural Networks (CNNs), giving them advantages over human performance on visual pattern recognition, which makes CNNs a good choice for WAM. Nevertheless, this research is largely unexplored. We thus propose "GenInSAR", a CNN-based generative model for joint phase filtering and coherence estimation, that directly learns the InSAR data distribution. GenInSAR's unsupervised training on satellite and simulated noisy InSAR images outperforms other five related methods in total residue reduction (over 16.5% better on average) with less over-smoothing/artefacts around branch cuts. GenInSAR's Phase, and Coherence Root-Mean-Squared-Error and Phase Cosine Error have average improvements of 0.54, 0.07, and 0.05 respectively compared to the related methods.Comment: to be published in a future issue of IEEE Geoscience and Remote Sensing Letter

Nonlocal noise reduction method based on fringe frequency compensation for SAR interferogram

Phase noise reduction is one of the key steps for synthetic aperture radar interferometry data processing. In this article, a novel phase filtering method is proposed. The main innovation and contribution of this research is to 1) incorporate local fringe frequency (LFF) compensation technique into the nonlocal phase filtering method to include more independent and identically distributed samples for filtering; 2) modify the nonlocal phase filter from three aspects: 1) executing nonlocal filtering in the complex domain of the residual phase to avoid gray jumps in phase, 2) adaptively calculating the smoothing parameter based on the LFF and the coherence coefficient, and 3) using the integral image in similarity calculation to improve the efficiency; 3) perform Goldstein filter in high coherence areas to reduce the computation expense. Experiments based on both simulated and real data have shown that the proposed method has achieved a better performance in terms of both noise reduction and edge preservation than some existing phase filtering methods

InSAR Deformation Analysis with Distributed Scatterers: A Review Complemented by New Advances

Interferometric Synthetic Aperture Radar (InSAR) is a powerful remote sensing technique able to measure deformation of the earth’s surface over large areas. InSAR deformation analysis uses two main categories of backscatter: Persistent Scatterers (PS) and Distributed Scatterers (DS). While PS are characterized by a high signal-to-noise ratio and predominantly occur as single pixels, DS possess a medium or low signal-to-noise ratio and can only be exploited if they form homogeneous groups of pixels that are large enough to allow for statistical analysis. Although DS have been used by InSAR since its beginnings for different purposes, new methods developed during the last decade have advanced the field significantly. Preprocessing of DS with spatio-temporal filtering allows today the use of DS in PS algorithms as if they were PS, thereby enlarging spatial coverage and stabilizing algorithms. This review explores the relations between different lines of research and discusses open questions regarding DS preprocessing for deformation analysis. The review is complemented with an experiment that demonstrates that significantly improved results can be achieved for preprocessed DS during parameter estimation if their statistical properties are used

Non-local methods for InSAR parameters estimation

In the thesis work the nonlocal paradigm has been investigated in the framework of Multitemporal SAR Interferometry, e.g. Differential Interferometry, Tomography, etc., and single InSAR pair, e.g. DEM generation. In the former, Adaptive Multi-Looking methods have been developed for the generation of interferometric data-stacks. Following the nonlocal approach, the proposed methods rely only on similar pixels according to a suitable similarity measure that exploits the stack's temporal information. An hybrid approach that jointly uses the nonlocal paradigm and transform domain filtering has been investigated for InSAR pair phase estimation. On the track of the BM3D and SARBM3D algorithms, different approaches to the filtering in the transform domain are investigated. Furthermore, a novel approach to the similarity computation and filtering, based on a relative-topography content of the interferometric phase rather than its absolute value, is proposed

Deep Learning for InSAR Phase Filtering: An Optimized Framework for Phase Unwrapping

Interferometric Synthetic Aperture Radar (InSAR) data processing applications, such as deformation monitoring and topographic mapping, require an interferometric phase filtering step. Indeed, the filtering quality significantly impacts the deformation and terrain height estimation accuracy. However, the existing classical and deep learning-based phase filtering methods provide artefacts in the filtered areas where a large amount of noise prevents retrieving the original signal. In this way, we can no longer distinguish the underlying informative signal for the next processing step. This paper proposes a deep convolutional neural network filtering method, developing a novel learning strategy to preserve the initial phase noise input into these crucial areas. Thanks to the encoder–decoder powerful phase feature extraction ability, the network can predict an accurate coherence and filtered interferometric phase, ensuring reliable final results. Furthermore, we also address a novel Synthetic Aperture Radar (SAR) interferograms simulation strategy that, using initial parameters estimated from real SAR images, considers physical behaviors typical of a real acquisition. According to the results achieved on simulated and real InSAR data, the proposed filtering method significantly outperforms the classical and deep learning-based ones