Textile UHF-RFID antenna sensors based on material features, interfaces and application scenarios

Tesi en modalitat de compendi de publicacions, amb una secció retallada per drets de l'editor. In reference to IEEE copyrighted material which is used with permission in this thesis, the IEEE does not endorse any of Universitat Politècnica de Catalunya's products or services. Internal or personal use of this material is permitted. If interested in reprinting/republishing IEEE copyrighted material for advertising or promotional purposes or for creating new collective works for resale or redistribution, please go to http://www.ieee.org/publications_standards/publications/rights/rights_link.html to learn how to obtain a License from RightsLink.Radio frequency identification over measurable ultra-high frequency textile substrates (UHF-RFID) is a promising technology to develop new applications in the field of health and the Internet of Things (IOT), due to the massive use of fabrics and the technological maturity of embroidery techniques. This thesis is the result of a compendium of publications on this topic. First, as a result of the analysis of the state of art, a systematic review entitled 'Wearable textile UHF-RFID sensors: A systematic review' has been published. The thesis aims to improve research on UHF-RFID textile-based sensor technology. Thanks to the analysis of the state of art, three novel research objectives have been set that are worth exploring. The first is to study novel detection functions for textile UHF-RFID based sensor technology; the second is to find a connection/interface solution between textile antennas and integrated circuit (IC) chips and the third is to reduce the costs of such technology to promote future commercial applications. To contextualize the thesis, it includes the necessary theoretical fundamentals and the manufacturing and characterization methods used during it. As a result of the work derived from the first objective, a scientific article entitled “Textile UHF-RFID Antenna Sensor for Measurements of Sucrose Solutions in Different Levels of Concentration” has been published. In this work, a textile UHF-RFID tag with two detection positions is proposed for sucrose solution measurements. The two detection positions with the different detection functions show good performance and can offer two options for future full applications. In addition, another scientific article entitled “ Textile UHF-RFID Antenna Embroidered on Surgical Masks for Future Textile Sensing Applications” has been published to support the first objective. The inspiration for this work came from the current pandemic situation. This work develops three progressive designs of textile UHF-RFID antennas over surgical masks due to the current global epidemic situation. Reliability testing demonstrated that the proposed designs can be used for human healthcare focused applications. As a result of the second objective, a research article entitled 'Experimental Comparison of Three Electro-textile Interfaces for Textile UHF-RFID Tags on Clothes' has been published. This work proposes three electro-textile interfaces integrated with the corresponding textile UHF-RFID antennas and provides the chip-textile connection solutions (through sewing, push buttons and insertion). As a result of this objective, an electro-textile interconnect system has been proposed together with its electrical model, which allows the correct adaptation of impedances between the RFID antennas and the integrated circuit. It is worth noting that the mixed-use feasibility of the proposed electro-textile interfaces and the designed textile UHF-RFID antennas has been verified, reducing the cost in the design procedure in applications where the read range requirements of the order of 1 meter. The third objective has been achieved and exposed by a scientific article entitled 'Electro-textile UHF-RFID Compression Sensor for Health-caring Applications'. It proposes a single UHF-RFID based compression textile sensor that can be used simultaneously in two different healthcare application scenarios, which directly impacts on cost reduction.La identificación por radiofrecuencia sobre substratos textiles de ultra alta frecuencia (UHF-RFID) con capacidad de medida es una tecnología prometedora para desarrollar nuevas aplicaciones en el campo de la salud y el Internet de las cosas (IOT), debido a la masiva utilización de los tejidos y a la madurez tecnológica de las técnicas de bordado. Esta tesis es el resultado de un compendio de publicaciones sobre dicha temática. En primer lugar, como resultado del análisis del estado del arte se ha publicado una revisión sistemática titulada 'Wearable textile UHF-RFID sensors: A systematic review'. La tesis tiene como objetivo mejorar la investigación sobre la tecnología de sensores basada en textiles UHF-RFID. Gracias al análisis del estado del arte se han fijado tres objetivos de investigación novedosos que vale la pena explorar. El primero es estudiar funciones de detección novedosas para la tecnología de sensores basada en UHF-RFID textiles; el segundo es encontrar una solución de conexión/interfaz entre antenas textiles y chips de circuito integrado (IC) y el tercero es la reducción de costes de dicha tecnología para promover futuras aplicaciones comerciales. Para contextualizar la tesis, ésta incluye los fundamentos teóricos necesarios y los métodos de fabricación y caracterización utilizados durante la misma. Como resultado del trabajo derivado del primer objetivo, se ha publicado un artículo científico titulado “Textile UHF-RFID Antenna Sensor for Measurements of Sucrose Solutions in Different Levels of Concentration”. En este trabajo, se propone una etiqueta UHF-RFID textil con dos posiciones de detección para mediciones de solución de sacarosa. Las dos posiciones de detección con las diferentes funciones de detección muestran un buen rendimiento y pueden ofrecer dos opciones para futuras aplicaciones completas. Además, se ha publicado otro artículo científico titulado "Textile UHF-RFID Antenna Embroidered on Surgical Masks for Future Textile Sensing Applications" para respaldar el primer objetivo. La inspiración para este trabajo vino de la actual situación de pandemia. En este trabajo se desarrollan tres diseños progresivos de antenas UHF-RFID textiles sobre mascarillas quirúrgicas debido a la situación epidémica mundial actual. Las pruebas de fiabilidad demostraron que los diseños propuestos se pueden usar para aplicaciones centradas en el cuidado de las personas. Como resultado del segundo objetivo, se ha publicado un artículo de investigación titulado 'Experimental Comparison of Three Electro-textile Interfaces for Textile UHF-RFID Tags on Clothes'. En este trabajo se proponen tres interfaces electro-textiles integradas con las correspondientes antenas UHF-RFID textiles y se aportan las soluciones de conexión chip-textil (mediante costura, botones a presión e inserción). Como resultado de este objetivo, se ha propuesto un sistema de interconexión electro-textil junto con su modelo eléctrico, lo que permite la correcta adaptación de impedancias entre las antenas RFID y el circuito integrado. Vale la pena señalar que se ha verificado la viabilidad de uso mixto de las interfaces electro-textiles propuestas y las antenas UHF-RFID textiles diseñadas, lo que reduce el coste en el procedimiento de diseño en aplicaciones donde los requerimientos de rango de lectura del orden de 1 metro. El tercer objetivo se ha alcanzado y expuesto mediante un artículo científico titulado 'Electro-textile UHF-RFID Compression Sensor for Health-caring Applications'. En él, se propone un único sensor textil de compresión basado en UHF-RFID que puede ser utilizado a la vez en dosPostprint (published version

Wireless power transmission: R&D activities within Europe

Wireless power transmission (WPT) is an emerging technology that is gaining increased visibility in recent years. Efficient WPT circuits, systems and strategies can address a large group of applications spanning from batteryless systems, battery-free sensors, passive RF identification, near-field communications, and many others. WPT is a fundamental enabling technology of the Internet of Things concept, as well as machine-to-machine communications, since it minimizes the use of batteries and eliminates wired power connections. WPT technology brings together RF and dc circuit and system designers with different backgrounds on circuit design, novel materials and applications, and regulatory issues, forming a cross disciplinary team in order to achieve an efficient transmission of power over the air interface. This paper aims to present WPT technology in an integrated way, addressing state-of-the-art and challenges, and to discuss future R&D perspectives summarizing recent activities in Europe.The work of N. Borges Carvalho and A. J. S. Soares Boaventura was supported by the Portuguese Foundation for Science and Technology (FCT) under Project CREATION EXCL/EEI-TEL/0067/2012 and Doctoral Scholarship SFRH/BD/80615/2011. The work of H. Rogier was supported by BELSPO through the IAP Phase VII BESTCOM project and the Fund for Scientific Research-Flanders (FWO-V). The work of A. Georgiadis and A. Collado was supported by the European Union (EU) under Marie Curie FP7-PEOPLE-2009-IAPP 251557 and the Spanish Ministry of Economy and Competitiveness Project TEC 2012-39143. The work of J. A. García and M. N. Ruíz was supported by the Spanish Ministries MICINN and MINECO under FEDER co-funded Project TEC2011-29126-C03-01 and Project CSD2008-00068. The work of J. Kracek and M. Mazanek was supported in part by the Czech Ministry of Education Youth and Sports under Project OC09075–Novel Emerging Wireless Systems

Antenna sensing for wearable applications

As wearable technologies are growing fast, there is emerging trend to increase functionality of the devices. Antennas which are primarily component in communication systems can offer attractive route forward to minimize the number of components functioning as a sensing element for wearable and flexible electronics. Toward development of flexible antenna as sensing element, this thesis investigates the development of the flexible and printed sensing NFC RFID tag. In this approach, the sensor measurement is supported by the internal sensor and analog-to-digital convertor (ADC) of the NFC transponder. Design optimisation, fabrication and characterization of the printed antenna are described. Besides, the printed antenna, NFC transponder and two simple resistive sensors are integrated to form a fully flexible sensing RFID tag demonstrating applicability in food and health monitoring. This thesis also presents development of two antenna sensors by using functional materials: (i) An inductor-capacitor (LC) resonant tank based wireless pressure sensor on electrospun Poly-L-lactide (PLLA) nanofibers-based substrate. The screen-printed resonant tank (resonant frequency of ~13.56 MHz) consists of a planar inductor connected in parallel with an interdigitated capacitor. Since the substrates is piezoelectric, the capacitance of the interdigitated capacitor varies in response to the applied pressure. To demonstrate a potential application of developed pressure sensor, it was integrated on a compression bandage to monitor sub-bandage pressure. (ii) To investigate the realization of sensing antenna as temperature sensor simple loop antenna is designed and in this study unlike the first study that the sensing element was the substrate, the conductive body of the antenna itself is considered as a functional material. In this case, a small part of a loop antenna which originally was printed using silver paste is replaced by Poly(3,4-ethylenedioxythiophene): polystyrene (PEDOT: PSS). The sensing mechanism is based on the resonant frequency shift by varying temperature. While using functional materials is useful for realization of antenna sensor, another approach also is presented by developing stretchable textile-based microstrip antennas on deformable substrate which can measure joint angles of a human limb. The EM characteristics of the meshed patch antenna were compared with its metallic counterpart fabricated with lithography technique. Moreover, the concept of stretchable UHF RFID-based strain sensor is touched in the final part of this thesis

1-D broadside-radiating leaky-wave antenna based on a numerically synthesized impedance surface

A newly-developed deterministic numerical technique for the automated design of metasurface antennas is applied here for the first time to the design of a 1-D printed Leaky-Wave Antenna (LWA) for broadside radiation. The surface impedance synthesis process does not require any a priori knowledge on the impedance pattern, and starts from a mask constraint on the desired far-field and practical bounds on the unit cell impedance values. The designed reactance surface for broadside radiation exhibits a non conventional patterning; this highlights the merit of using an automated design process for a design well known to be challenging for analytical methods. The antenna is physically implemented with an array of metal strips with varying gap widths and simulation results show very good agreement with the predicted performance

Beam scanning by liquid-crystal biasing in a modified SIW structure

A fixed-frequency beam-scanning 1D antenna based on Liquid Crystals (LCs) is designed for application in 2D scanning with lateral alignment. The 2D array environment imposes full decoupling of adjacent 1D antennas, which often conflicts with the LC requirement of DC biasing: the proposed design accommodates both. The LC medium is placed inside a Substrate Integrated Waveguide (SIW) modified to work as a Groove Gap Waveguide, with radiating slots etched on the upper broad wall, that radiates as a Leaky-Wave Antenna (LWA). This allows effective application of the DC bias voltage needed for tuning the LCs. At the same time, the RF field remains laterally confined, enabling the possibility to lay several antennas in parallel and achieve 2D beam scanning. The design is validated by simulation employing the actual properties of a commercial LC medium

Desenho de antenas para sensores passivos em materiais não convencionais

Doutoramento em Engenharia EletrotécnicaMotivado pela larga expansão dos sistemas RFID e com o desenvolvimento do conceito de Internet das Coisas, a evolução no desenho e métodos de produção de antenas em suportes de materiais alternativos tem tido uma exploração intensiva nos últimos anos. Isto permitiu, não só o desenvolvimento de produtos no campo da interação homem-máquina, mas também tornar estes produtos mais pequenos e leves. A procura de novas técnicas e métodos para produzir eletrónica impressa e antenas em materiais alternativos e, portanto, uma porta aberta para o aparecimento de novas tecnologias. Isto aplica-se especialmente no mercado dos sensores, onde o peso, o tamanho, o consumo energético, e a adaptabilidade a diversos ambientes, têm grande relevância. Esta tese foca-se no desenvolvimento de antenas com suporte em materiais não convenvionais, como os já testados papel e têxteis, mas também na exploração de outros, desconhecidos do ponto de vista eléctrico, como a cortiça e polímeros biodegradáveis usados em impressão 3D. Estes materiais são portanto usados como substrato, ou material de suporte, para diversas antenas e, como tal, as propriedades electromagnéticas destes materiais têm de ser determinadas. Assim, e apresentado neste documento uma revisão de métodos de caracterização de materiais, bem como a proposta de um método baseado em linhas de trasmissão impressas, e a respectiva caracterização electromagnética de diversos materiais. Além disso, são propostos desenhos de antenas para diversos cenários e aplicações utilizando os materiais anteriormente mencionados. Com esta tese concluiu-se que a utilização de materiais alternativos e hoje uma realidade e os resultados obtidos são muito encorajodares para o desenvolvimento de um conjunto de sensores para aplicações RFID com uma grande capacidade de integração.The advancement of the design and fabrication of antennas using textiles or paper as substrates has rapidly grown motivated by the boom of RFID systems and the developing concept of the Internet of Things. These advancements have allowed, not only the development of products for manmachine interaction, but also to make these products smaller and lighter. The search for new techniques and methods to produce printed electronics and antennas in alternative materials is therefore an open door for new technologies to emerge. Especially in the sensors market, where weight, size, power consumption and the adaptability to the target application, are of great importance. This thesis focuses on the development of antenna design approaches with alternative materials, such as the already tested paper and textiles, but also others relatively unknown, such as cork and biodegradable polymers used in 3D printing. These materials are applied to act as substrates, or support structures for the antennas. Therefore, their electromagnetic properties need to be determined. Due to that, a review of electromagnetic characterization methods, as well as the proposal of a custom method based on printed transmission lines, is presented in this document. Besides, several antenna designs, for di erent application scenarios, using the previously mentioned materials, are proposed. With this thesis it was proved that it is possible to develop passive sensors in di erent alternative materials for RFID applications and others, which shows great promise in the use of these materials to achieve higher integration in sensing and identi cation applications

Doctor of Philosophy

dissertationAntenna design and reduction of losses in antenna systems are critical for modern communications systems. Two categories of antennas suffer from limited power supply and difficult operating environments: implantable antennas and antennas for spacecraft applications. Minimizing and controlling losses in these two antenna types is critical for developing next-generation implantable devices, spacecraft, and satellites. Research suggests that future tattoo antennas will be made from low-conductivity ink utilizing the natural insulating property of the body's fat and lossy ground plane of muscle. This paper supports tattoo antenna work by: (1) demonstrating the insulating properties of fat and conductivity of muscle with various antenna systems, (2) showing the effect of biological materials on the current distribution of subdermal antennas, and (3) validating the use of lower-conductivity materials in subdermal antenna design including a novel gold nanoparticle material. Simulations and measurements are used to evaluate current distributions shared between solid, segmented, and meshed strip dipole antennas and surrounding body tissues. Fat insulates the antenna similar to a thin layer of plastic wrap. Muscle acts as a conductive ground plane. Dipole antennas with mesh or gap structures are more strongly coupled to body tissues than solid antennas. A minimum acceptable conductivity benchmark of 105 S/m is established for dipole antennas and Radio-Frequency Identification (RFID) antennas. This work also provides novel information on the design of low-cost, circularly polarized (CP), Ka-band (26 GHz), millimeter-wave, 50 Ω edge-fed, corners truncated patch antennas on RT/duroid 5880 (εr = 2.2, ½ oz. copper cladding). Microstrip feed width, axial ratio (AR) bandwidth, and best AR at 26 GHz are optimized by the use of 10 mil substrate. The effects of corner truncation are further investigated, showing that increasing corner truncation increases AR bandwidth, increases percent offset between best S11 and AR frequencies, and worsens the best AR. A truncation of 0.57 mm is a good compromise between these effects with AR bandwidth of 6.17 % (measured) and 1.37 % (simulated). Increasing ratio of substrate thickness to design frequency, t / λd, improves AR bandwidth. For t / λd below a certain threshold a corners truncated patch antenna will not produce CP. A new nearly-square, corners truncated patch antenna is measured and simulated as a method of increasing circular polarization bandwidth (CPBW)