A Modular, Real-Time Fieldbus Architecture for Mobile Robotic Platforms

Cataloged from PDF version of article.The design and construction of complex and reconfigurable embedded systems such as small autonomous mobile robots is a challenging task that involves the selection, interfacing, and programming of a large number of sensors and actuators. Facilitating this tedious process requires modularity and extensibility both in hardware and software components. In this paper, we introduce the universal robot bus (URB), a real-time fieldbus architecture that facilitates rapid integration of heterogeneous sensor and actuator nodes to a central processing unit (CPU) while providing a software abstraction that eliminates complications arising from the lack of hardware homogeneity. Motivated by our primary application area of mobile robotics, URB is designed to be very lightweight and efficient, with real-time support for Recommended Standard (RS) 232 or universal serial bus connections to a central computer and inter-integrated circuit (I(2)C), controller area network, or RS485 bus connections to embedded nodes. It supports automatic synchronization of data acquisition across multiple nodes, provides high data bandwidth at low deterministic latencies, and includes flexible libraries for modular software development both for local nodes and the CPU. This paper describes the design of the URB architecture, provides a careful experimental characterization of its performance, and demonstrates its utility in the context of its deployment in a legged robot platform

The driver concept for the DLR Lightweight Robot III

In this paper we present the synchronization and driver architecture of the DLR LWR-III, which supplies an easy to use interface for applications. For our purpose we abstracted the robot hardware entirely from the control algorithms using the common device driver concept of modern operating systems. The software architecture is split into two modular parts. On the one side, there are device drivers that communicate with the hardware components. On the other side, there are realtime ap- plications realized as Simulink Models, which provide advanced control algorithms. This ensures a clean separation between the two modules and provides a communication over a common and approved interface. Furthermore we investigated how we can ensure synchronization to the hardware over the device driver interfaces and how we can ensure that it meets hard realtime requirements. The main result of this paper is to realize a synchronization between LWR-III hardware and Simulink control applications while targeting small latencies with respect to hard realtime requirements. The design is implemented and verified on WindRiverTM VxWorksTM

An Approach to remote process monitoring and control

The purpose of this thesis is to present an approach to remote monitoring and operation of distributed real time process control systems. Conventional monitoring of process control systems currently requires a great deal of close supervision from trained personnel located on-site. In many cases, researchers, developers or maintenance personnel cannot be at every location where such a system is installed. Currently, a standardized architecture for remote access to such systems is not available. In addition, most of these systems are very expensive and under-utilized. Researchers would benefit by having access to different parts of a system concurrently The benefits of a layered architecture for remote process monitoring and control will be analyzed through the use of a demonstration system that was realized to examine the real time performance of the interconnection mechanisms between the process controller(s) and the system monitoring interfaces. Low level, real-time process control is achieved by using specialized networking schemes called fieldbusses to interconnect all control devices. In this system, fieldbus controllers will also assume the role of servers connected to the Internet, in order to make device information available to any local or remote clients. In the proposed architecture, remote clients are user interfaces, implemented as JAVA applets, which can be accessed with a web browser. The proposed system architecture allows for client interfaces to gain remote access to various types of fieldbusses transparently

Cybersecurity of Industrial Cyber-Physical Systems: A Review

Industrial cyber-physical systems (ICPSs) manage critical infrastructures by controlling the processes based on the "physics" data gathered by edge sensor networks. Recent innovations in ubiquitous computing and communication technologies have prompted the rapid integration of highly interconnected systems to ICPSs. Hence, the "security by obscurity" principle provided by air-gapping is no longer followed. As the interconnectivity in ICPSs increases, so does the attack surface. Industrial vulnerability assessment reports have shown that a variety of new vulnerabilities have occurred due to this transition while the most common ones are related to weak boundary protection. Although there are existing surveys in this context, very little is mentioned regarding these reports. This paper bridges this gap by defining and reviewing ICPSs from a cybersecurity perspective. In particular, multi-dimensional adaptive attack taxonomy is presented and utilized for evaluating real-life ICPS cyber incidents. We also identify the general shortcomings and highlight the points that cause a gap in existing literature while defining future research directions.Comment: 32 pages, 10 figure

Online Intelligent Controllers for an Enzyme Recovery Plant: Design Methodology and Performance

This paper focuses on the development of intelligent controllers for use in a process of enzyme recovery from pineapple rind. The proteolytic enzyme bromelain (EC 3.4.22.4) is precipitated with alcohol at low temperature in a fed-batch jacketed tank. Temperature control is crucial to avoid irreversible protein denaturation. Fuzzy or neural controllers offer a way of implementing solutions that cover dynamic and nonlinear processes. The design methodology and a comparative study on the performance of fuzzy-PI, neurofuzzy, and neural network intelligent controllers are presented. To tune the fuzzy PI Mamdani controller, various universes of discourse, rule bases, and membership function support sets were tested. A neurofuzzy inference system (ANFIS), based on Takagi-Sugeno rules, and a model predictive controller, based on neural modeling, were developed and tested as well. Using a Fieldbus network architecture, a coolant variable speed pump was driven by the controllers. The experimental results show the effectiveness of fuzzy controllers in comparison to the neural predictive control. The fuzzy PI controller exhibited a reduced error parameter (ITAE), lower power consumption, and better recovery of enzyme activity

Advancing Space Robotics with the EtherCAT Communication Standard

Space-specific communication technologies meet the demanding technical requirements of next gen space robotics only partially while showing disadvantages in terms of the strategic requirements for cost, openness and vendor diversity. EtherCAT is considered to be the most widely used Ethernet-based standard for motion communication, and it is also widely used in robotics. In this paper, we will describe how the EtherCAT technology meets the specific requirements of space robotics. In addition, we intend to show how the space industry benefits from agreeing on this technology for robotics

How Space Robotics benefits from the World Standard for Motion Communication

The space industry is in transition and has realized that sticking to proprietary technologies is a cost trap, while adopting proven standards leads to success faster and more economically. This is particularly true for space robotics and its communication technologies: agreeing on a uniform standard makes particular sense here, because this leads to standard components from which all space robot makers benefit. This paper discusses the fieldbus requirements of space robotics and shows how EtherCAT - the world standard for motion communication - meets these requirements

Resource Requirements of an Edge-based Digital Twin Service: An Experimental Study

Digital Twin (DT) is a pivotal application under the industrial digital transformation envisaged by the fourth industrial revolution (Industry 4.0). DT defines intelligent and real-time faithful reflections of physical entities such as industrial robots, thus allowing their remote control. Relying on the latest advances in Information and Communication Technologies (ICT), namely Network Function Virtualization (NFV) and Edge-computing, DT can be deployed as an on-demand service in the factories close proximity and offered leveraging radio access technologies. However, with the purpose of achieving the well-known scalability, flexibility, availability and performance guarantees benefits foreseen by the latest ICT, it is steadily required to experimentally profile and assess DT as a Service (DTaaS) solutions. Moreover, the dependencies between the resources claimed by the service and the relative demand and work loads require to be investigated. In this work, an Edge-based Digital Twin solution for remote control of robotic arms is deployed in an experimental testbed where, in compliance with the NFV paradigm, the service has been segmented in virtual network functions. Our research has primarily the objective to evaluate the entanglement among overall service performance and VNFs resource requirements, and the number of robots consuming the service varies. Experimental profiles show the most critical DT features to be the inverse kinematics and trajectory computations. Moreover, the same analysis has been carried out as a function of the industrial processes, namely based on the commands imposed on the robots, and particularly of their abstraction-level, resulting in a novel trade-off between computing and time resources requirements and trajectory guarantees. The derived results provide crucial insights for the design of network service scaling and resource orchestration frameworks dealing with DTaaS applications. Finally, we empirically prove LTE shortage to accommodate the minimum DT latency requirements

NASA Tech Briefs, December 2011

Topics covered include: 1) SNE Industrial Fieldbus Interface; 2) Composite Thermal Switch; 3) XMOS XC-2 Development Board for Mechanical Control and Data Collection; 4) Receiver Gain Modulation Circuit; 5) NEXUS Scalable and Distributed Next-Generation Avionics Bus for Space Missions; 6) Digital Interface Board to Control Phase and Amplitude of Four Channels; 7) CoNNeCT Baseband Processor Module; 8) Cryogenic 160-GHz MMIC Heterodyne Receiver Module; 9) Ka-Band, Multi-Gigabit-Per-Second Transceiver; 10) All-Solid-State 2.45-to-2.78-THz Source; 11) Onboard Interferometric SAR Processor for the Ka-Band Radar Interferometer (KaRIn); 12) Space Environments Testbed; 13) High-Performance 3D Articulated Robot Display; 14) Athena; 15) In Situ Surface Characterization; 16) Ndarts; 17) Cryo-Etched Black Silicon for Use as Optical Black; 18) Advanced CO2 Removal and Reduction System; 19) Correcting Thermal Deformations in an Active Composite Reflector; 20) Umbilical Deployment Device; 21) Space Mirror Alignment System; 22) Thermionic Power Cell To Harness Heat Energies for Geothermal Applications; 23) Graph Theory Roots of Spatial Operators for Kinematics and Dynamics; 24) Spacesuit Soft Upper Torso Sizing Systems; 25) Radiation Protection Using Single-Wall Carbon Nanotube Derivatives; 26) PMA-PhyloChip DNA Microarray to Elucidate Viable Microbial Community Structure; 27) Lidar Luminance Quantizer; 28) Distributed Capacitive Sensor for Sample Mass Measurement; 29) Base Flow Model Validation; 30) Minimum Landing Error Powered-Descent Guidance for Planetary Missions; 31) Framework for Integrating Science Data Processing Algorithms Into Process Control Systems; 32) Time Synchronization and Distribution Mechanisms for Space Networks; 33) Local Estimators for Spacecraft Formation Flying; 34) Software-Defined Radio for Space-to-Space Communications; 35) Reflective Occultation Mask for Evaluation of Occulter Designs for Planet Finding; and 36) Molecular Adsorber Coatin