729 research outputs found
Quantifying Potential Energy Efficiency Gain in Green Cellular Wireless Networks
Conventional cellular wireless networks were designed with the purpose of
providing high throughput for the user and high capacity for the service
provider, without any provisions of energy efficiency. As a result, these
networks have an enormous Carbon footprint. In this paper, we describe the
sources of the inefficiencies in such networks. First we present results of the
studies on how much Carbon footprint such networks generate. We also discuss
how much more mobile traffic is expected to increase so that this Carbon
footprint will even increase tremendously more. We then discuss specific
sources of inefficiency and potential sources of improvement at the physical
layer as well as at higher layers of the communication protocol hierarchy. In
particular, considering that most of the energy inefficiency in cellular
wireless networks is at the base stations, we discuss multi-tier networks and
point to the potential of exploiting mobility patterns in order to use base
station energy judiciously. We then investigate potential methods to reduce
this inefficiency and quantify their individual contributions. By a
consideration of the combination of all potential gains, we conclude that an
improvement in energy consumption in cellular wireless networks by two orders
of magnitude, or even more, is possible.Comment: arXiv admin note: text overlap with arXiv:1210.843
Cooperative control of relay based cellular networks
PhDThe increasing popularity of wireless communications and the higher data
requirements of new types of service lead to higher demands on wireless networks.
Relay based cellular networks have been seen as an effective way to meet usersâ
increased data rate requirements while still retaining the benefits of a cellular
structure. However, maximizing the probability of providing service and spectrum
efficiency are still major challenges for network operators and engineers because of
the heterogeneous traffic demands, hard-to-predict user movements and complex
traffic models.
In a mobile network, load balancing is recognised as an efficient way to increase
the utilization of limited frequency spectrum at reasonable costs. Cooperative
control based on geographic load balancing is employed to provide flexibility for
relay based cellular networks and to respond to changes in the environment.
According to the potential capability of existing antenna systems, adaptive radio
frequency domain control in the physical layer is explored to provide coverage at
the right place at the right time.
This thesis proposes several effective and efficient approaches to improve
spectrum efficiency using network wide optimization to coordinate the coverage
offered by different network components according to the antenna models and
relay station capability. The approaches include tilting of antenna sectors,
changing the power of omni-directional antennas, and changing the assignment of
relay stations to different base stations. Experiments show that the proposed
approaches offer significant improvements and robustness in heterogeneous traffic
scenarios and when the propagation environment changes. The issue of predicting
the consequence of cooperative decisions regarding antenna configurations when
applied in a realistic environment is described, and a coverage prediction model is
proposed. The consequences of applying changes to the antenna configuration on
handovers are analysed in detail. The performance evaluations are based on a
system level simulator in the context of Mobile WiMAX technology, but the
concepts apply more generally
Handover analysis over mobile WiMAX technology.
As new mobile devices and mobile applications continue to growth, so does the data traffic demand for broadband services access and the user needs toward mobility, thereby, wireless application became today the fastest solution and lowest cost implementation unlike traditional wired deployment such as optical fibers and digital lines. WiMAX technology satisfies this gap through its high network performance over the air interface and high data rates based on the IEEE 802.16-2004 standards, this original specification does not support mobility.
Therefore, the IEEE introduces a new standard that enables mobility profiles under 802.16e-2005, from which three different types of handovers process are introduced as hard handover (HHO), macro diversity handover (MDHO) and fast base station switching (FBSS) handover.
The objective of this master thesis is to analyze how the handover process affects network performance. The analysis propose three scenarios, built over OPNET simulator to measure the most critical wireless parameter and performance indicator such as throughput, handover success rate, packet drop, delay and network usage.fi=OpinnÀytetyö kokotekstinÀ PDF-muodossa.|en=Thesis fulltext in PDF format.|sv=LÀrdomsprov tillgÀngligt som fulltext i PDF-format
Radio Communications
In the last decades the restless evolution of information and communication technologies (ICT) brought to a deep transformation of our habits. The growth of the Internet and the advances in hardware and software implementations modiïŹed our way to communicate and to share information. In this book, an overview of the major issues faced today by researchers in the ïŹeld of radio communications is given through 35 high quality chapters written by specialists working in universities and research centers all over the world. Various aspects will be deeply discussed: channel modeling, beamforming, multiple antennas, cooperative networks, opportunistic scheduling, advanced admission control, handover management, systems performance assessment, routing issues in mobility conditions, localization, web security. Advanced techniques for the radio resource management will be discussed both in single and multiple radio technologies; either in infrastructure, mesh or ad hoc networks
Practical design of optimal wireless metropolitan area networks: model and algorithms for OFDMA networks
A thesis submitted to the University of Bedfordshire, in partial fulfilment of the requirements for the degree of Ph.D.This thesis contributes to the study of the planning and optimisation of wireless metropolitan area networks, in particular to the access network design of OFDMAbased systems, where different parameters like base station position, antenna tilt and azimuth need to be configured during the early stages of the network life. A practical
view for the solution of this problem is presented by means of the development of a
novel design framework and the use of multicriteria optimisation. A further consideration of relaying and cooperative communications in the context of the design
of this kind of networks is done, an area little researched.
With the emergence of new technologies and services, it is very important to accurately identify the factors that affect the design of the wireless access network and define how to take them into account to achieve optimally performing and cost-efficient networks. The new features and flexibility of OFDMA networks seem particularly suited to the provision of different broadband services to metropolitan areas. However, until now, most existing efforts have been focused on the basic access capability networks. This thesis presents a way to deal with the trade-offs generated during the
OFDMA access network design, and presents a service-oriented optimization framework that offers a new perspective for this process with consideration of the technical and economic factors.
The introduction of relay stations in wireless metropolitan area networks will bring numerous advantages such as coverage extension and capacity enhancement due to the
deployment of new cells and the reduction of distance between transmitter and receiver.
However, the network designers will also face new challenges with the use of relay
stations, since they involve a new source of interference and a complicated air interface;
and this need to be carefully evaluated during the network design process.
Contrary to the well known procedure of cellular network design over regular or
hexagonal scenarios, the wireless network planning and optimization process aims to
deal with the non-uniform characteristics of realistic scenarios, where the existence of
hotspots, different channel characteristics for the users, or different service requirements will determine the final design of the wireless network. This thesis is structured in three main blocks covering important gaps in the existing literature in planning (efficient simulation) and optimisation. The formulation and ideas proposed in the former case can still be evaluated over regular scenarios, for the sake of simplicity, while the study of latter case needs to be done over specific scenarios that will be described when
appropriate. Nevertheless, comments and conclusions are extrapolated to more general
cases throughout this work.
After an introduction and a description of the related work, this thesis first focuses
on the study of models and algorithms for classical point-to-multipoint networks on
Chapter 3, where the optimisation framework is proposed. Based on the framework, this
work:
- Identifies the technology-specific physical factors that affect most importantly
the network system level simulation, planning and optimization process.
- It demonstrates how to simplify the problem and translate it into a formal optimization routine with consideration of economic factors.
- It provides the network provider, a detailed and clear description of different
scenarios during the design process so that the most suitable solution can be found. Existing works on this area do not provide such a comprehensive framework.
In Chapter 4:
- The impact of the relay configuration on the network planning process is analysed.
- A new simple and flexible scheme to integrate multihop communications in the
Mobile WiMAX frame structure is proposed and evaluated.
- Efficient capacity calculations that allow intensive system level simulations in a multihop environment are introduced.
In Chapter 5:
- An analysis of the optimisation procedure with the addition of relay stations and the derived higher complexity of the process is done.
- A frequency plan procedure not found in the existing literature is proposed, which combines it with the use of the necessary frame fragmentation of in-band relay communications and cooperative procedures.
- A novel joint two-step process for network planning and optimisation is proposed.
Finally, conclusions and open issues are exposed
Applications of Soft Computing in Mobile and Wireless Communications
Soft computing is a synergistic combination of artificial intelligence methodologies to model and solve real world problems that are either impossible or too difficult to model mathematically. Furthermore, the use of conventional modeling techniques demands rigor, precision and certainty, which carry computational cost. On the other hand, soft computing utilizes computation, reasoning and inference to reduce computational cost by exploiting tolerance for imprecision, uncertainty, partial truth and approximation. In addition to computational cost savings, soft computing is an excellent platform for autonomic computing, owing to its roots in artificial intelligence. Wireless communication networks are associated with much uncertainty and imprecision due to a number of stochastic processes such as escalating number of access points, constantly changing propagation channels, sudden variations in network load and random mobility of users. This reality has fuelled numerous applications of soft computing techniques in mobile and wireless communications. This paper reviews various applications of the core soft computing methodologies in mobile and wireless communications
Project Final Report â FREEDOM ICT-248891
This document is the final publishable summary report of the objective and work carried out within the European Project FREEDOM, ICT-248891.This document is the final publishable summary report of the objective and work carried out within the European Project FREEDOM, ICT-248891.Preprin
Future Trends and Challenges for Mobile and Convergent Networks
Some traffic characteristics like real-time, location-based, and
community-inspired, as well as the exponential increase on the data traffic in
mobile networks, are challenging the academia and standardization communities
to manage these networks in completely novel and intelligent ways, otherwise,
current network infrastructures can not offer a connection service with an
acceptable quality for both emergent traffic demand and application requisites.
In this way, a very relevant research problem that needs to be addressed is how
a heterogeneous wireless access infrastructure should be controlled to offer a
network access with a proper level of quality for diverse flows ending at
multi-mode devices in mobile scenarios. The current chapter reviews recent
research and standardization work developed under the most used wireless access
technologies and mobile access proposals. It comprehensively outlines the
impact on the deployment of those technologies in future networking
environments, not only on the network performance but also in how the most
important requirements of several relevant players, such as, content providers,
network operators, and users/terminals can be addressed. Finally, the chapter
concludes referring the most notable aspects in how the environment of future
networks are expected to evolve like technology convergence, service
convergence, terminal convergence, market convergence, environmental awareness,
energy-efficiency, self-organized and intelligent infrastructure, as well as
the most important functional requisites to be addressed through that
infrastructure such as flow mobility, data offloading, load balancing and
vertical multihoming.Comment: In book 4G & Beyond: The Convergence of Networks, Devices and
Services, Nova Science Publishers, 201
- âŠ