Investigation of novel multi-layer spoke-type ferrite interior permanent magnet machines

The permanent magnet synchronous machines have been attracting more and more attention due to the advantages of high torque density, outstanding efficiency and maturing technologies. Under the urges of mandatory energy efficiency requirements, they are considered as the most potential candidates to replace the comparatively low-efficient induction machines which dominate the industrial market. However, most of the high performance permanent magnet machines are based on high cost rare-earth materials. Thus, there will be huge demands for low-cost high-performance permanent magnet machines. Ferrite magnet is inexpensive and abundant in supply, and is considered as the most promising alternative to achieve the goal of low cost and high performance. In consideration of the low magnetic energy, this thesis explored the recent developments and possible ideas of ferrite machines, and proposed a novel multi-layer spoke-type interior permanent magnet configuration combining the advantages of flux focusing technique and multi-layer structure. With comparable material cost to induction machines, the proposed ferrite magnet design could deliver 27% higher power with 2-4% higher efficiency with exactly the same frame size. Based on the data base of International Energy Agency (IEA), electricity consumed by electric machines reached 7.1PWh in 2006 [1]. Considering that induction machines take up 90% of the overall industrial installation, the potential energy savings is enormous. This thesis contributes in five key aspects towards the investigation and design of low-cost high-performance ferrite permanent magnet machines. Firstly, accurate analytical models for the multi-layer configurations were developed with the consideration of spatial harmonics, and provided effective yet simple way for preliminary design. Secondly, the influence of key design parameters on performance of the multi-layer ferrite machines were comprehensively investigated, and optimal design could be carried out based on the insightful knowledge revealed. Thirdly, systematic investigation of the demagnetization mechanism was carried out, focusing on the three key factors: armature MMF, intrinsic coercivity and working temperature. Anti-demagnetization designs were presented accordingly to reduce the risk of performance degradation and guarantee the safe operation under various loading conditions. Then, comparative study was carried out with a commercial induction machine for verification of the superior performance of the proposed ferrite machine. Without loss of generality, the two machines had identical stator cores, same rotor diameter and stacking length. Under the operating condition of same stator copper loss, the results confirmed the superior performance of the ferrite machine in terms of torque density, power factor and efficiency. Lastly, mechanical design was discussed to reduce the cost of mass production, and the experimental effort on the prototype machine validates the advantageous performance as well as the analytical and FEA predictions

Using GIS and intelligent transportation tools for biomass supply chain modeling and cost assessment

Stable, functional, and efficient bioethanol production systems on the national level must emphasize solutions of feedstock availability and transportation problems. Transportation logistics are a critical factor in the optimization of biomass supply chains. A single 25 million gallon per year cellulosic ethanol biorefinery will require delivery of 18,500 semi loads of bales to the plant. For a typical corn-stover biomass supply chain, baled corn stover must be transported in two phases, first from the field to a storage site and then from the storage site to the biorefinery. All activities between these two points are interconnected and together they form the biomass supply chain. The goal of supply-chain optimization is to minimize the total cost of these activities (transportation cost per unit, inventory cost per unit etc.) while satisfying the supply demands of a biorefinery. The objective of the first chapter of this thesis is to provide a detailed report on a recent analysis of production-scale biomass transportation. Specifically, 16,000 large square bales of corn stover were harvested and hauled to satellite storage during the 2011 and 2012 harvest seasons. Intensive Geographic Information Systems (GIS) tracking and video capture of the loading, securement, hauling, and unloading events were collected and the results were summarized. The second chapter presents specific results including: metrics for measuring supply chain efficiency, current capability of biomass supply chains, and sensitivity analysis to improvements in future supply chains. A discrete modeling technique was utilized to make proper assessment of the supply-chain system performance. The supply-chain model was a representation of a realistic biomass transportation cycle between a single cornfield and biomass storage. The discrete model included multiple simulations using different model factors. This approach provided complete assessment of influence of various factors on system productivity. Understanding basic transportation metrics, handling parameters, and their interaction can be crucial for planning and implementing an optimal supply-chain solution. The outcomes of this work can be used to create more efficient supply systems and to improve economic aspects of biofuel production process in general

Mathematical Approaches to Modeling, Optimally Designing, and Controlling Electric Machine

Optimal performance of the electric machine/drive system is mandatory to improve the energy consumption and reliability. To achieve this goal, mathematical models of the electric machine/drive system are necessary. Hence, this motivated the editors to instigate the Special Issue “Mathematical Approaches to Modeling, Optimally Designing, and Controlling Electric Machine”, aiming to collect novel publications that push the state-of-the art towards optimal performance for the electric machine/drive system. Seventeen papers have been published in this Special Issue. The published papers focus on several aspects of the electric machine/drive system with respect to the mathematical modelling. Novel optimization methods, control approaches, and comparative analysis for electric drive system based on various electric machines were discussed in the published papers

Design study of general aviation collision avoidance system

The selection and design of a time/frequency collision avoidance system for use in general aviation aircraft is discussed. The modifications to airline transport collision avoidance equipment which were made to produce the simpler general aviation system are described. The threat determination capabilities and operating principles of the general aviation system are illustrated

Assessment of flywheel energy storage for spacecraft power systems

The feasibility of inertial energy storage in a spacecraft power system is evaluated on the basis of a conceptual integrated design that encompasses a composite rotor, magnetic suspension, and a permanent magnet (PM) motor/generator for a 3-kW orbital average payload at a bus distribution voltage of 250 volts dc. The conceptual design, which evolved at the Goddard Space Flight Center (GSFC), is referred to as a Mechanical Capacitor. The baseline power system configuration selected is a series system employing peak-power-tracking for a Low Earth-Orbiting application. Power processing, required in the motor/generator, provides a potential alternative configurations that can only be achieved in systems with electrochemical energy storage by the addition of power processing components. One such alternative configuration provides for peak-power-tracking of the solar array and still maintains a regulated bus, without the expense of additional power processing components. Precise speed control of the two counterrotating wheels is required to reduce interaction with the attitude control system (ACS) or alternatively, used to perform attitude control functions. Critical technologies identified are those pertaining to the energy storage element and are prioritized as composite wheel development, magnetic suspension, motor/generator, containment, and momentum control. Comparison with a 3-kW, 250-Vdc power system using either NiCd or NiH2 for energy storage results in a system in which inertial energy storage offers potential advantages in lifetime, operating temperature, voltage regulation, energy density, charge control, and overall system weight reduction

Proceedings of the 8th International Conference EEMODS'2013 Energy Efficiency in Motor Driven Systems

This book contains the papers presented at the eighth international conference on Energy Efficiency in Motor Driven Systems EEMODS 2013 EEMODS 2013 was organised in Rio de Janeiro, Brasil from 28 to 30 October 2013. This major international conference, which was previously been staged in Lisbon (1996), London (1999), Treviso (2002), Heidelberg (2005), Beijing (2007), Nantes (2009) and Washington DC (2011) has been very successful in attracting an international and distinguished audience, representing a wide variety of stakeholders in policy implementation and development, manufacturing and promotion of energy-efficient motor systems, including key policy makers, equipment manufacturers, academia and end-users. Potential readers who may benefit from this book include researchers, engineers, policymakers, energy agencies, electric utilities, and all those who can influence the design, selection, application, and operation of electrical motor driven systems.JRC.F.7-Renewables and Energy Efficienc

European Strategy for Particle Physics -- Accelerator R&D Roadmap

The 2020 update of the European Strategy for Particle Physics emphasised the importance of an intensified and well-coordinated programme of accelerator R&D, supporting the design and delivery of future particle accelerators in a timely, affordable and sustainable way. This report sets out a roadmap for European accelerator R&D for the next five to ten years, covering five topical areas identified in the Strategy update. The R&D objectives include: improvement of the performance and cost-performance of magnet and radio-frequency acceleration systems; investigations of the potential of laser / plasma acceleration and energy-recovery linac techniques; and development of new concepts for muon beams and muon colliders. The goal of the roadmap is to document the collective view of the field on the next steps for the R&D programme, and to provide the evidence base to support subsequent decisions on prioritisation, resourcing and implementation.Comment: 270 pages, 58 figures. Editor: N. Mounet. LDG chair: D. Newbold. Panel chairs: P. V\'edrine (HFM), S. Bousson (RF), R. Assmann (plasma), D. Schulte (muon), M. Klein (ERL). Panel editors: B. Baudouy (HFM), L. Bottura (HFM), S. Bousson (RF), G. Burt (RF), R. Assmann (plasma), E. Gschwendtner (plasma), R. Ischebeck (plasma), C. Rogers (muon), D. Schulte (muon), M. Klein (ERL

9th International Conference on Energy Efficiency in Motor Driven Systems

The 9th International Conference on Energy Efficiency in Motor Driven Systems (EEMODS'15) was be held in Helsinki (Finland) on 15-17 September, 2015. The EEMODS'15 conferences have been very successful in attracting distinguished and international presenters and attendees. The wide variety of stakeholders has included professionals involved in manufacturing, marketing, and promotion of energy efficient motors and motor driven systems and representatives from research labs, academia, and public policy. EEMODS’15 provided a forum to discuss and debate the latest developments in the impacts of electrical motor systems (advanced motors and drives, compressors, pumps, and fans) on energy and the environment, the policies and programmes adopted and planned, and the technical and commercial advances made in the dissemination and penetration of energy-efficient motor systems. In addition EEMODS covered also energy management in organizations, international harmonization of test method and financing of energy efficiency in motor systems. The Book of Proceedings contains the peer reviewed paper that have been presented at the conference.JRC.F.7-Renewables and Energy Efficienc