Auto configuration dans LTE : procédés de mesure de l’occupation du canal radio pour une utilisation optimisée du spectre

Projecte final de carrera realitzat en col.laboració amb el centre INP Grenoble - ENSIMAG. École Nationale Supérieure d’Informatique et de Mathématiques Appliquées de Grenoble i Alcatel-Lucent Bell LabsLong Term Evolution (LTE) est la quatrième génération de technologies radio qui est conçue afin de fournir des débits de données élevés aux mobiles, offrir une faible latence et permettre une flexibilité accrue dans l'attribution du spectre de fréquence. Les techniques de réutilisation du spectre permettent ainsi de faire face à la demande croissante en bande passante des utilisateurs. Nous nous concentrons sur le cas où toutes les cellules partagent la même bande de fréquence (frequency reuse-1). Ces cellules ainsi déployées peuvent générer des niveaux d’interférence intra-canal importants, ce qui affecte considérablement les performances du réseau. Le but de ce stage est de développer des méthodes de sensing du spectre permettant de caractériser les cellules qui partagent les mêmes ressources radio. En utilisant des informations telles que nombre de cellules en compétition notamment, les mécanismes d’allocation des ressources radio peuvent être optimisés, améliorent ainsi la performance du réseau. Les méthodes ainsi étudiées exploitent les propriétés d’orthogonalité des canaux de contrôle tels que signaux de synchronisation diffusés par chaque station de base. Une première étape du stage a ainsi consisté à mettre en place des méthodes de synchronisation fiables en ‘frequency reuse-1’ et d’en étudier les performances. Au cours de la deuxième partie du stage, une méthode d’identification du nombre de cellules en compétition sur un même canal est proposée. Cette méthode repose sur l’utilisation des canaux de synchronisation. Le stage a lieu sur le site de Villarceaux d’ Alcatel-Lucent Bell Labs et s’est intégré aux projets de recherche sur l'auto-configuration des cellules dans un réseau LTE. Ce rapport présente les travaux réalisés pendant le stage. Celui-ci s’est concentré sur la procédure réalisée par les mobiles afin de se synchroniser au réseau. Dans cette optique,nous avons proposé une méthode pour trouver le nombre des cellules en compétition, afin de caractériser l'occupation du spectre

Inband Relaying in Long Term Evolution-Advanced Networks

The set of stringent requirements for 4G radio access networks has triggered the embodiment of new small low-power nodes, e.g. relay, Femto and Pico access nodes, as part of the network infrastructure. Various types of relay nodes are currently supported in IEEE 802.16m and 3GPP LTE-Advanced, e.g. inband Layer 2 or Layer 3 nodes and outband nodes, considering different functional capabilities and backhauling characteristics. In general, relay nodes are characterized by compact physical characteristics, low power consumption, a wireless backhaul link to the core network, and relaxed installation guidelines with respect to radiation and planning regulation. In specific, inband relay nodes, the matter of this study, are Layer 3 access nodes with time-multiplexed transmission and reception on their wireless backhaul and access links, which operate on the same frequency band. These characteristics impose serious challenges on one hand, but allow for significant improvements on the other hand. In this context, the deployment flexibility of relay nodes simplifies the network planning procedure and reduces deployment costs. On the other hand, low power transmission and limited antenna capabilities result in small relay cell coverage areas which will lead to load imbalances. Besides, multiplexing backhaul and access communications on different subframes implies the need for suitable two-hop resource allocation and scheduling. Further challenges are attributed to increased interference levels compared to macrocell deployments, as well as the introduction of a new interference type known as relay-to-relay interference resulting from the misalignment of access and backhaul link dedicated subframes at different relay nodes. The research towards this thesis has addressed these challenges within 3GPP LTE-Advanced context. A feasibility study of different relaying modes is provided and the performance of relay deployments is evaluated in different propagation environments. Thereafter, simple network planning techniques are proposed to alleviate the limitations of the inband backhaul link. Further, novel techniques are investigated to address resource allocation and scheduling, load balancing and interference coordination. The performance of proposed techniques along with the energy efficiency of relay nodes is evaluated. Results show in general significant gains and validate relaying as an efficient enhancement technology

Full-Duplex Wireless for 6G: Progress Brings New Opportunities and Challenges

The use of in-band full-duplex (FD) enables nodes to simultaneously transmit and receive on the same frequency band, which challenges the traditional assumption in wireless network design. The full-duplex capability enhances spectral efficiency and decreases latency, which are two key drivers pushing the performance expectations of next-generation mobile networks. In less than ten years, in-band FD has advanced from being demonstrated in research labs to being implemented in standards and products, presenting new opportunities to utilize its foundational concepts. Some of the most significant opportunities include using FD to enable wireless networks to sense the physical environment, integrate sensing and communication applications, develop integrated access and backhaul solutions, and work with smart signal propagation environments powered by reconfigurable intelligent surfaces. However, these new opportunities also come with new challenges for large-scale commercial deployment of FD technology, such as managing self-interference, combating cross-link interference in multi-cell networks, and coexistence of dynamic time division duplex, subband FD and FD networks.Comment: 21 pages, 15 figures, accepted to an IEEE Journa

Architecture of a cognitive non-line-of-sight backhaul for 5G outdoor urban small cells

Densely deployed small cell networks will address the growing demand for broadband mobile connectivity, by increasing access network capacity and coverage. However, most potential small cell base station (SCBS) locations do not have existing telecommunication infrastructure. Providing backhaul connectivity to core networks is therefore a challenge. Millimeter wave (mmW) technologies operated at 30-90GHz are currently being considered to provide low-cost, flexible, high-capacity and reliable backhaul solutions using existing roof-mounted backhaul aggregation sites. Using intelligent mmW radio devices and massive multiple-input multiple-output (MIMO), for enabling point-to-multipoint (PtMP) operation, is considered in this research. The core aim of this research is to develop an architecture of an intelligent non-line-sight (NLOS) small cell backhaul (SCB) system based on mmW and massive MIMO technologies, and supporting intelligent algorithms to facilitate reliable NLOS street-to-rooftop NLOS SCB connectivity. In the proposed architecture, diffraction points are used as signal anchor points between backhaul radio devices. In the new architecture the integration of these technologies is considered. This involves the design of efficient artificial intelligence algorithms to enable backhaul radio devices to autonomously select suitable NLOS propagation paths, find an optimal number of links that meet the backhaul performance requirements and determine an optimal number of diffractions points capable of covering predetermined SCB locations. Throughout the thesis, a number of algorithms are developed and simulated using the MATLAB application. This thesis mainly investigates three key issues: First, a novel intelligent NLOS SCB architecture, termed the cognitive NLOS SCB (CNSCB) system is proposed to enable street-to-rooftop NLOS connectivity using predetermined diffraction points located on roof edges. Second, an algorithm to enable the autonomous creation of multiple-paths, evaluate the performance of each link and determine an optimal number of possible paths per backhaul link is developed. Third, an algorithm to determine the optimal number of diffraction points that can cover an identified SCBS location is also developed. Also, another investigated issue related to the operation of the proposed architecture is its energy efficiency, and its performance is compared to that of a point-to-point (PtP) architecture. The proposed solutions were examined using analytical models, simulations and experimental work to determine the strength of the street-to-rooftop backhaul links and their ability to meet current and future SCB requirements. The results obtained showed that reliable multiple NLOS links can be achieved using device intelligence to guide radio signals along the propagation path. Furthermore, the PtMP architecture is found to be more energy efficient than the PtP architecture. The proposed architecture and algorithms offer a novel backhaul solution for outdoor urban small cells. Finally, this research shows that traditional techniques of addressing the demand for connectivity, which consisted of improving or evolving existing solutions, may nolonger be applicable in emerging communication technologies. There is therefore need to consider new ways of solving the emerging challenges

Context-Aware Self-Healing for Small Cell Networks

These can be an invaluable source of information for the management of the network, in a way that we have denominated as context-aware SON, which is the approach proposed in this thesis. To develop this concept, the thesis follows a top-down approach. Firstly, the characteristics of the cellular deployments are assessed, especially for indoor small cell networks. In those scenarios, the need for context-aware SON is evaluated and considered indispensable. Secondly, a new cellular architecture is defined to integrate both context information and SON mechanisms in the management plane of the mobile network. Thus, the specifics of making context an integral part of cellular OAM/SON are defined. Also, the real-world implementation of the architecture is proposed. Thirdly, from the established general SON architecture, a logical self-healing framework is defined to support the context-aware healing mechanisms to be developed. Fourthly, different self-healing algorithms are defined depending on the failures to be managed and the conditions of the considered scenario. The mechanisms are based on probabilistic analysis, making use of both context and network data for detection and diagnosis of cellular issues. The conditions for the implementation of these methods are assessed. Their applicability is evaluated by means of simulators and testbed trials. The results show important improvements in performance and capabilities in comparison to previous methods, demonstrating the relevance of the proposed approach.The last years have seen a continuous increase in the use of mobile communications. To cope with the growing traffic, recently deployed technologies have deepened the adoption of small cells (low powered base stations) to serve areas with high demand or coverage issues, where macrocells can be both unsuccessful or inefficient. Also, new cellular and non-cellular technologies (e.g. WiFi) coexist with legacy ones, including also multiple deployment schemes (macrocell, small cells), in what is known as heterogeneous networks (HetNets). Due to the huge complexity of HetNets, their operation, administration and management (OAM) became increasingly difficult. To overcome this, the NGMN Alliance and the 3GPP defined the Self-Organizing Network (SON) paradigm, aiming to automate the OAM procedures to reduce their costs and increase the resulting performance. One key focus of SON is the self-healing of the network, covering the automatic detection of problems, the diagnosis of their causes, their compensation and their recovery. Until recently, SON mechanisms have been solely based on the analysis of alarms and performance indicators. However, on the one hand, this approach has become very limited given the complexity of the scenarios, and particularly in indoor cellular environments. Here, the deployment of small cells, their coexistence with multiple telecommunications systems and the nature of those environments (in terms of propagation, coverage overlapping, fast demand changes and users' mobility) introduce many challenges for classic SON. On the other hand, modern user equipment (e.g. smartphones), equipped with powerful processors, sensors and applications, generate a huge amount of context information. Context refers to those variables not directly associated with the telecommunication service, but with the terminals and their environment. This includes the user's position, applications, social data, etc

Design of indoor communication infrastructure for ultra-high capacity next generation wireless services

The proliferation of data hungry wireless devices, such as smart phones and intelligent sensing networks, is pushing modern wireless networks to their limits. A significant shortfall in the ability of networks to meet demand for data is imminent. This thesis addresses this problem through examining the design of distributed antenna systems (DAS) to support next generation high speed wireless services that require high densities of access points and must support multiple-input multiple-output (MIMO) protocols. First, it is shown that fibre links in DAS can be replaced with low-cost, broadband free-space optical links, termed radio over free-space optics (RoFSO) links. RoFSO links enable the implementation of very high density DAS without the need for prohibitively expensive cabling infrastructure. A 16m RoFSO link requiring only manual alignment is experimentally demonstrated to provide a spurious-free dynamic range (SFDR) of > 100dB/Hz^2/3 over a frequency range from 300MHz- 3.1GHz. The link is measured to have an 802.11g EVM dynamic range of 36dB. This is the first such demonstration of a low-cost broadband RoFSO system. Following this, the linearity performance of RoFSO links is examined. Because of the high loss nature of RoFSO links, the directly-modulated semiconductor lasers they use are susceptible to high-order nonlinear behaviour, which abruptly limits performance at high powers. Existing measures of dynamic range, such as SFDR, assume only third-order nonlinearity and so become inaccurate in the presence of dominant high-order effects. An alternative measure of dynamic range called dynamic-distortion-free dynamic range (DDFDR) is then proposed. For two different wireless services it is observed experimentally that on average the DDFDR upper limit predicts the EVM knee point to within 1dB, while the third-order SFDR predicts it to within 6dB. This is the first detailed analysis of high-order distortion effects in lossy analogue optical links and DDFDR is the first metric able to usefully quantify such behaviour. Next, the combination of emerging MIMO wireless protocols with existing DAS is examined. It is demonstrated for the first time that for small numbers of MIMO streams (up to ~4), the capacity benefits of MIMO can be attained in existing DAS installations simply by sending the different MIMO spatial streams to spatially separated remote antenna units (RAU). This is in contrast to the prevailing paradigm of replicating each MIMO spatial stream at each RAU. Experimental results for two representative DAS layouts show that replicating spatial streams provides an increase of only ~1% in the median channel capacity over merely distributing them. This compares to a 3-4% increase of both strategies over traditional non-DAS MIMO. This result is shown to hold in the multiple user case with 20 users accessing 3 base stations. It is concluded that existing DAS installations offer negligible capacity penalty for MIMO services for small numbers of spatial streams, including in multi-user MIMO scenarios. Finally, the design of DAS to support emerging wireless protocols, such as 802.11ac, that have large numbers of MIMO streams (4-8) is considered. In such cases, capacity is best enhanced by sending multiple MIMO streams to single remote locations. This is achieved using a novel holographic mode division multiplexing (MDM) system, which sends each separate MIMO stream via a different propagation mode in a multimode fibre. Combined channel measurements over 2km of mode-multiplexed MMF and a typical indoor radio environment show in principle a 2x2 MIMO link providing capacities of 10bit/s/Hz over a bandwidth of 6GHz. Using a second experimental set-up it is shown that the system could feasibly support at least up to a 4x4 MIMO system over 2km of MMF with a condition number >15dB over a bandwidth of 3GHz, indicating a high degree of separability of the channels. Finally, it is shown experimentally that when a fibre contains sharp bends (radius between 20mm and 7.2mm) the first 6 mode-groups used for multiplexing exhibit no additional power loss or cross-coupling compared with unbent fibre, although mode-groups 7, 8 and 9 are more severely affected. This indicates that at least 6x6 multiplexing is possible in standard installations with tight fibre bends.For their financial support, I would like to thank the Rutherford Foundation of the Royal Society of New Zealand, the Cambridge Commonwealth Trust and the EPSRC

Reliable Packet Streams with Multipath Network Coding

With increasing computational capabilities and advances in robotics, technology is at the verge of the next industrial revolution. An growing number of tasks can be performed by artificial intelligence and agile robots. This impacts almost every part of the economy, including agriculture, transportation, industrial manufacturing and even social interactions. In all applications of automated machines, communication is a critical component to enable cooperation between machines and exchange of sensor and control signals. The mobility and scale at which these automated machines are deployed also challenges todays communication systems. These complex cyber-physical systems consisting of up to hundreds of mobile machines require highly reliable connectivity to operate safely and efficiently. Current automation systems use wired communication to guarantee low latency connectivity. But wired connections cannot be used to connect mobile robots and are also problematic to deploy at scale. Therefore, wireless connectivity is a necessity. On the other hand, it is subject to many external influences and cannot reach the same level of reliability as the wired communication systems. This thesis aims to address this problem by proposing methods to combine multiple unreliable wireless connections to a stable channel. The foundation for this work is Caterpillar Random Linear Network Coding (CRLNC), a new variant of network code designed to achieve low latency. CRLNC performs similar to block codes in recovery of lost packets, but with a significantly decreased latency. CRLNC with Feedback (CRLNC-FB) integrates a Selective-Repeat ARQ (SR-ARQ) to optimize the tradeoff between delay and throughput of reliable communication. The proposed protocol allows to slightly increase the overhead to reduce the packet delay at the receiver. With CRLNC, delay can be reduced by more than 50 % with only a 10 % reduction in throughput. Finally, CRLNC is combined with a statistical multipath scheduler to optimize the reliability and service availability in wireless network with multiple unreliable paths. This multipath CRLNC scheme improves the reliability of a fixed-rate packet stream by 10 % in a system model based on real-world measurements of LTE and WiFi. All the proposed protocols have been implemented in the software library NCKernel. With NCKernel, these protocols could be evaluated in simulated and emulated networks, and were also deployed in several real-world testbeds and demonstrators.:Abstract 2 Acknowledgements 6 1 Introduction 7 1.1 Motivation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 1.2 Use Cases and Requirements . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9 1.3 Opportunities of Multipath . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15 1.4 Contribution . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16 2 State of the Art of Multipath Communication 19 2.1 Physical Layer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19 2.2 Data Link Layer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20 2.3 Network Layer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21 2.4 Transport Layer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22 2.5 Application Layer and Session Layer . . . . . . . . . . . . . . . . . . . . . . . . . . . 23 2.6 Research Gap . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25 3 NCKernel: Network Coding Protocol Framework 27 3.1 Theory that matters! . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27 3.2 Requirements . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28 3.3 Implementation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29 3.3.1 Socket Buffers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29 3.3.2 En-/Re-/Decoder API . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30 3.3.3 Configuration . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31 3.3.4 Timers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31 3.3.5 Tracing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32 3.4 Applications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32 3.5 Protocols . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33 4 Low-Latency Network Coding 35 4.1 Problem Statement . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35 4.2 Random Linear Network Coding . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36 4.3 Low Latency Network Codes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37 4.4 CRLNC: Caterpillar Random Linear Network Coding . . . . . . . . . . . . . . . . . . 38 4.4.1 Encoding and Packet Format . . . . . . . . . . . . . . . . . . . . . . . . . . . 38 4.4.2 Decoding . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 41 4.4.3 Computational Complexity . . . . . . . . . . . . . . . . . . . . . . . . . . . . 41 4.5 Evaluation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 43 4.5.1 System Model . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 43 4.5.2 Simulator . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 44 4.5.3 Packet Loss Probability . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 45 4.5.4 Delay . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 46 4.5.5 Window Size Considerations . . . . . . . . . . . . . . . . . . . . . . . . . . . 48 4.6 Conclusion . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 54 5 Delay-Throughput Tradeoff 55 5.1 Problem Statement . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 55 5.2 Network Coding with ARQ . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 55 5.3 CRLNC-FB: CRLNC with Feedback . . . . . . . . . . . . . . . . . . . . . . . . . . . . 56 5.3.1 Encoding and Packet Format . . . . . . . . . . . . . . . . . . . . . . . . . . . 57 5.3.2 Decoding and Feedback . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 57 5.3.3 Retransmissions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 59 5.4 Evaluation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 62 5.4.1 System Model . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 62 5.4.2 Simulator . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 63 5.4.3 Systematic Retransmissions . . . . . . . . . . . . . . . . . . . . . . . . . . . 63 5.4.4 Coded Packet Memory . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 66 5.4.5 Comparison with other Protocols . . . . . . . . . . . . . . . . . . . . . . . . 67 5.5 Conclusion . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 72 6 Multipath for Reliable Low-Latency Packet Streams 73 6.1 Problem Statement . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 73 6.2 Related Work . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 74 6.3 System Model . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 75 6.3.1 Traffic Model . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 75 6.3.2 Network Model . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 75 6.3.3 Channel Model . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 76 6.3.4 Reliability Definition . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 76 6.4 Multipath CRLNC . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 77 6.4.1 Window Size for Heterogeneous Paths . . . . . . . . . . . . . . . . . . . . . 77 6.4.2 Packet Scheduling . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 79 6.5 Evaluation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 79 6.5.1 Simulator . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 79 6.5.2 Preliminary Analysis . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 81 6.5.3 Simulation Results . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 82 6.6 Conclusion . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 90 7 Conclusion 94 7.1 Results and Contribution . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 94 7.2 Future Research Topics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 95 Acronyms 99 Publications 101 Bibliography 10

Towards the Internet of Smart Trains: A Review on Industrial IoT-Connected Railways

[Abstract] Nowadays, the railway industry is in a position where it is able to exploit the opportunities created by the IIoT (Industrial Internet of Things) and enabling communication technologies under the paradigm of Internet of Trains. This review details the evolution of communication technologies since the deployment of GSM-R, describing the main alternatives and how railway requirements, specifications and recommendations have evolved over time. The advantages of the latest generation of broadband communication systems (e.g., LTE, 5G, IEEE 802.11ad) and the emergence of Wireless Sensor Networks (WSNs) for the railway environment are also explained together with the strategic roadmap to ensure a smooth migration from GSM-R. Furthermore, this survey focuses on providing a holistic approach, identifying scenarios and architectures where railways could leverage better commercial IIoT capabilities. After reviewing the main industrial developments, short and medium-term IIoT-enabled services for smart railways are evaluated. Then, it is analyzed the latest research on predictive maintenance, smart infrastructure, advanced monitoring of assets, video surveillance systems, railway operations, Passenger and Freight Information Systems (PIS/FIS), train control systems, safety assurance, signaling systems, cyber security and energy efficiency. Overall, it can be stated that the aim of this article is to provide a detailed examination of the state-of-the-art of different technologies and services that will revolutionize the railway industry and will allow for confronting today challenges.Galicia. Consellería de Cultura, Educación e Ordenación Universitaria; ED431C 2016-045Galicia. Consellería de Cultura, Educación e Ordenación Universitaria; ED341D R2016/012Galicia. Consellería de Cultura, Educación e Ordenación Universitaria; ED431G/01Agencia Estatal de Investigación (España); TEC2013-47141-C4-1-RAgencia Estatal de Investigación (España); TEC2015-69648-REDCAgencia Estatal de Investigación (España); TEC2016-75067-C4-1-

Interface air pour systèmes de navigation en bande S : étude détaillée des signaux OFDM

Positioning in urban or indoor environment is a hot topic, either due to regulations such as the E911 requiring US mobile telecommunication operators to be able to locate their subscribers in case of emergency, or due to the market development, with the extension of location - based services targeting the mass market concentrated in metropolitan areas. In urban or indoor areas, it is generally recognized that satellite - based positioning systems are not suitable (alone) to provide a continuous, reliable and accurate position to the user. Therefore, alternative positioning techniques may be useful to complement or replace satellite positioning in these environments. This PhD study ha s studied the possibility of using a mobile TV system based on the DVB - SH standard as system of opportunity for positioning. The advantage s of using a DVB - SH system for positioning are multiple. First, such system has a good availability in metropolitan areas, including indoor. Secondly, the emitters are synchronized and their density should be sufficient to track signals from several emitters simultaneously. This opens the possibility of using timing measurements from several emitters to find a position by trilateration . Also, the large bandwidth of the TV signal, required for the transmission of video content, should be beneficial for the accuracy of the timing measurements and for the robustness against multipath . Therefore, DVB - SH system seems to be an interesting candidate as system of opportunity for positioning. However, several challenges are to be solved for such a solution to be relevant. First, the signals propagate in the urban environment, which creates challenging conditions for positioning su ch as strong power fading, blockage of the desired line - of - sight signal or large echoes. Secondly, the DVB - SH standard uses an OFDM modulation, which has not been studied for positioning purpose. Therefore, techniques for fine tracking of the first receive d signal replica will have to be developed. Finally, a particularity of modern broadcast system is the use of a Single Frequency Network, in which all emitters send the same signal on the same carrier frequency. Therefore emitter identification in a Single Frequency will be another issue to be solved. This PhD study has proved the feasibility of positioning using DVB - SH signals. The main contributions of this work are the propositions of (1) an OFDM signal delay tracking method working in urban propagation channels, and (2) a modification to the network deployment permitting emitter identification and (3) a first assessment of the position accuracy using the proposed algorithms. These two methods have very low impact on the initial TV broadcasting service if the right set of signal parameters is chosen: no signal modification is required and the network deployment modification uses a feature already present in the DVB - SH standard. The positioning method was simulated using real urban propagation channel measurements. The obtained position has root mean square error of 4 0m. The main error contribution comes from tracking a non - line - of - sight signal. Further work would be required to deal with this issue, which would lower the position root mean square error to 7 m, which has been locally observed in the simulation for good tracking conditionsLe positionnement en environnement urbain est un domaine de recherche actif, de par la croissance des services grand public liées à la localisation, et à cause de réglementations émergentes liées aux situations d'urgence (E911). En environnement urbain ou à l'intérieur des bâtiments, il est communément admis que les systèmes de positionnement basés sur des satellites ne sont pas suffisants pour fournir une position précise, fiable et de manière continue. Des techniques de positionnement alternatives sont donc développées afin de remplacer ou compléter les systèmes de positionnement par satellite. Cette thèse étudie la possibilité de fournir un service de positionnement utilisant un futur système de diffusion de télévison vers les mobiles basé sur le standard DVB-SH. Le principal attrait de ce système pour du positionnement est sa bonne couverture en milieu urbain, ainsi que l'utilisation d'un réseau d'émetteurs synchronisés. Il est donc possible d'employer des mesures de temps d'arrivée des signaux afin de réaliser une triangulation pour calculer la position d'un récepteur. Afin de fournir ce service innovant, des techniques spécifiques d'estimation de pseudo-distance et d'identification d'émetteurs ont été développées dans le cadre de cette thèse. Le principal résultat de cette étude est d'avoir montré la faisabilité du positionnement utilisant un système DVB-SH, ne nécessitant que de légères modifications du système qui n'apportent aucune dégradation auservice de diffusion TV. De premières simulations ont montré une précision de positionnement autour de 40m en utilisant des mesures réalistes de canal de propagation urbain

Performance evaluation of next generation wireless UAV relay with millimeter-wave in access and backhaul

Future wireless communication, particularly densified 5G networks, will bring numerous innovations to the telecommunication industry and will support 100-fold gain in throughput rates, 100-fold in capacity (for at least 100 billion devices), individual user data rate of up-to 10 Gb/s, extremely low latency and response times. In such a scenario, the use of Unmanned Aerial Vehicle (UAV) as a Base Station (gNB) becomes a viable option for providing 5G services, both on-demand and on a regular basis. Recent development of UAVs have made its deployment faster and reliable, resulting in a shift in its usage from traditional military to more commercial and corporate industries. On the other hand, due to the abundant availability of bandwidth in the millimeter-wave band (mmWave), there is an immense potential to utilize this band for next generation radio systems. In this case, smart integration of UAVs in 5G network provides immense potential, however, such network require efficient placement mechanism for providing blazingly fast wireless cellular network services. In this study, we analyze and describe the distinctive characteristics of mmWave propagation. The main goal is to investigate and evaluate the use of mmWave in Access and Back-haul communication links simultaneously for Amplify-and-Forward relays deployed on UAVs. We formulate the required mathematical framework for calculating the UE received power for direct path (gNB-UE) and relay path (gNB-UAV-UE) based on two cases; (i) Friis Transmission Equation and (ii) Log-Distance Path loss Model. We conduct simulations using ray-tracing simulator in different scenarios while comparing and verifying the simulation results vs mathematical equations. For the proposed system architecture, International Telecommunication Union (ITU) recommendation city model is used to calculate the probability for Line of Sight (LoS) and Non Line of Sight (NLoS) paths in different urban environments. Furthermore, we study and identify different parameters i.e., UAV location, and amplification factor to maximize the performance of an Amplify-and-Forward UAV based relay for providing enhanced coverage to the users. Similarly, the optimum UAV-gNB height is evaluated in different urban environments while providing coverage to the users via an Amplify-and-Forward relay. The study concludes with the Signal to Noise Ratio (SNR) analysis for the relay path compared with the direct path where we identify the constraints for effective relaying