Caracterização e estudo comparativo de exsudações de hidrocarbonetos e plays petrolíferos em bacias terrestres das regiões central do Irã e sudeste do Brasil usando sensoriamento remoto espectral

Orientador: Carlos Roberto de Souza FilhoTese (doutorado) - Universidade Estadual de Campinas, Instituto de GeociênciasResumo: O objetivo desta pesquisa foi explorar as assinaturas de exsudações de hidrocarbonetos na superfície usando a tecnologia de detecção remota espectral. Isso foi alcançado primeiro, realizando uma revisão abrangente das capacidades e potenciais técnicas de detecção direta e indireta. Em seguida, a técnica foi aplicada para investigar dois locais de teste localizados no Irã e no Brasil, conhecidos por hospedar sistemas ativos de micro-exsudações e afloramentos betuminosos, respectivamente. A primeira área de estudo está localizada perto da cidade de Qom (Irã), e está inserida no campo petrolífero Alborz, enterrado sob sedimentos datados do Oligoceno da Formação Upper Red. O segundo local está localizado perto da cidade de Anhembi (SP), na margem oriental da bacia do Paraná, no Brasil, e inclui acumulações de betume em arenitos triássicos da Formação Pirambóia. O trabalho na área de Qom integrou evidências de (i) estudos petrográficos e geoquímicos em laboratório, (ii) investigações de afloramentos em campo, e (iii) mapeamento de anomalia em larga escala através de conjuntos de dados multi-espectrais ASTER e Sentinel-2. O resultado deste estudo se trata de novos indicadores mineralógicos e geoquímicos para a exploração de micro-exsudações e um modelo de micro-exsudações atualizado. Durante este trabalho, conseguimos desenvolver novas metodologias para análise de dados espectroscópicos. Através da utilização de dados simulados, indicamos que o instrumento de satélite WorldView-3 tem potencial para detecção direta de hidrocarbonetos. Na sequência do estudo, dados reais sobre afloramentos de arenitos e óleo na área de Anhembi foram investigados. A área foi fotografada novamente no chão e usando o sistema de imagem hiperespectral AisaFENIX. Seguiu-se estudos e amostragem no campo,incluindo espectroscopia de alcance fechado das amostras no laboratório usando instrumentos de imagem (ou seja, sisuCHEMA) e não-imagem (ou seja, FieldSpec-4). O estudo demonstrou que uma abordagem espectroscópica multi-escala poderia fornecer uma imagem completa das variações no conteúdo e composição do betume e minerais de alteração que acompanham. A assinatura de hidrocarbonetos, especialmente a centrada em 2300 nm, mostrou-se consistente e comparável entre as escalas e capaz de estimar o teor de betume de areias de petróleo em todas as escalas de imagemAbstract: The objective of this research was to explore for the signatures of seeping hydrocarbons on the surface using spectral remote sensing technology. It was achieved firstly by conducting a comprehensive review of the capacities and potentials of the technique for direct and indirect seepage detection. Next, the technique was applied to investigate two distinctive test sites located in Iran and Brazil known to retain active microseepage systems and bituminous outcrops, respectively. The first study area is located near the city of Qom in Iran, and consists of Alborz oilfield buried under Oligocene sediments of the Upper-Red Formation. The second site is located near the town of Anhembi on the eastern edge of the Paraná Basin in Brazil and includes bitumen accumulations in the Triassic sandstones of the Pirambóia Formation. Our work in Qom area integrated evidence from (i) petrographic, spectroscopic, and geochemical studies in the laboratory, (ii) outcrop investigations in the field, and (iii) broad-scale anomaly mapping via orbital remote sensing data. The outcomes of this study was novel mineralogical and geochemical indicators for microseepage characterization and a classification scheme for the microseepage-induced alterations. Our study indicated that active microseepage systems occur in large parts of the lithofacies in Qom area, implying that the extent of the petroleum reservoir is much larger than previously thought. During this work, we also developed new methodologies for spectroscopic data analysis and processing. On the other side, by using simulated data, we indicated that WorldView-3 satellite instrument has the potential for direct hydrocarbon detection. Following this demonstration, real datasets were acquired over oil-sand outcrops of the Anhembi area. The area was further imaged on the ground and from the air by using an AisaFENIX hyperspectral imaging system. This was followed by outcrop studies and sampling in the field and close-range spectroscopy in the laboratory using both imaging (i.e. sisuCHEMA) and nonimaging instruments. The study demonstrated that a multi-scale spectroscopic approach could provide a complete picture of the variations in the content and composition of bitumen and associated alteration mineralogy. The oil signature, especially the one centered at 2300 nm, was shown to be consistent and comparable among scales, and capable of estimating the bitumen content of oil-sands at all imaging scalesDoutoradoGeologia e Recursos NaturaisDoutor em Geociências2015/06663-7FAPES

Spectral remote sensing for onshore seepage characterization: A critical overview

FAPESP - FUNDAÇÃO DE AMPARO À PESQUISA DO ESTADO DE SÃO PAULOIn this article, we overview the application of spectral remote sensing data collected by multi-, and hyperspectral instruments in the visible-near infrared (VNIR), short-wave infrared (SWIR), and longwave infrared (LWIR) wavelengths for characterization of seepage systems as an exploration indicator of subsurface hydrocarbon (HC) accumulations. Two seepage systems namely macro-, and microseepage are recognized. A macroseepage is defined as visible indications of oil and gas on the surface and in the air detectable directly by a remote sensing approach. A microseepage is defined as invisible traces of light HCs in soils and sediments that are detectable by its secondary footprints in the strata, hence an indirect remote sensing target. Based on these broad categories, firstly, a comprehensive set of well-described and reliable remote sensing case studies available in the literature are thoroughly reviewed and then systematically assessed as regards the methodological shortcomings and scantiness in data gathering, processing, and interpretation. The work subsequently attempts to go through seminal papers published on microseepage concept and interrelated geochemical and geophysical techniques, exhumed HC reservoirs, lab-based spectroscopic analysis of petroleum and other related disciplines from a remote sensing standpoint. The aim is to enrich the discussion and highlight the still unexplored capabilities of this technique in accomplishing exploration objectives using the concept of seepage system. Aspects of seepage phenomenon in environmental pollution and uncertainties associated with their role in global warming are also underlined. This work benefits from illustrative products generated over two study areas located in the Ventura Basin, State of California, USA and the Tucano Basin, State of Bahia, Brazil known to host distinctive macro-, and microseepage systems, respectively. In conclusion, we recommend further research over a diverse range of seepage systems and advocate for a mature conceptual model for microseepage phenomenon1684872FAPESP - FUNDAÇÃO DE AMPARO À PESQUISA DO ESTADO DE SÃO PAULOFAPESP - FUNDAÇÃO DE AMPARO À PESQUISA DO ESTADO DE SÃO PAULO2015/06663-

Teledetección hiperespectral y exploración geológica para la configuración de modelos geometalúrgicos en sistemas hidrotermales

Hydrothermal systems develop complex mineral assemblages and the grades, mineralogy, texture and petrological nature are very heterogeneously distributed in the massif. These minerals can be identified at surface using hyperspectral remote sensing, characterizing hydrothermal alterations, lithology, tectonic structures, geochemical halos of large areas, faster and at less cost. The objectives of this research are: (1) To describe how hyperspectral techniques applied to modern geometallurgy enable more resilient mining operations, (2) To evaluate hyperspectral techniques as tools to identify complex mineralogy in hydrothermal systems, (3) To highlight the geometallurgical approach in the decision making mechanisms of a mining company. This review research has been elaborated after a systematic bibliographic search with Boolean operators in the databases Scopus, Springer, Web of Science, Science Direct, Scielo, establishing as selection criteria information in English of the last decade on the variables. The results show that hyperspectral remote sensing allows the definition of mineralogical patterns, comminution domains and problem situations in leaching heaps, influencing the significant reduction of CAPEX and OPEX, optimizing the conversion of resources into reserves by identifying in real time complex mineralogy and alterations, decisive parameters in the configuration of geometallurgical models.Los sistemas hidrotermales desarrollan ensamblajes minerales complejos y las leyes, mineralogía, textura y naturaleza petrológica se distribuyen de forma muy heterogénea en el macizo. Estos minerales pueden identificarse en superficie utilizando teledetección hiperespectral, caracterizando alteraciones hidrotermales, litologías, estructuras tectónicas, halos geoquímicos de áreas extensas, más rápido y a menos costo. Esta investigación tiene como objetivos: (1) Describir como las técnicas hiperespectrales aplicadas a la moderna geometalurgía permiten operaciones mineras más resilientes, (2) Evaluar las técnicas hiperespectrales como herramientas de identificación de mineralogías complejas en sistemas hidrotermales; (3) Resaltar el enfoque geometalúrgico en los mecanismos de toma de decisiones en una empresa minera. Esta investigación de revisión ha sido elaborada luego una búsqueda bibliográfica sistemática con operadores booleanos en las bases de datos Scopus, Springer, Web of Science, Science Direct, Scielo, estableciéndose como criterios de selección información en ingles de la última década sobre las variables. Los resultados muestran que la teledetección hiperespectral, permite la definición de patrones mineralógicos, dominios de conminución y situaciones problema en pilas de lixiviación influyendo en la reducción significativa del CAPEX y OPEX, optimizando la conversión de recursos en reservas al identificar en tiempo real complejas mineralogías y alteraciones, parámetros decisivos en la configuración de modelos geometalúrgicos

Development of an unsupervised remote sensing methodology of detect surface leakage from terrestrial CO2 storage sites

Imperial Users onl

Spectroscopy-supported digital soil mapping

Global environmental changes have resulted in changes in key ecosystem services that soils provide. It is necessary to have up to date soil information on regional and global scales to ensure that these services continue to be provided. As a result, Digital Soil Mapping (DSM) research priorities are among others, advancing methods for data collection and analyses tailored towards large-scale mapping of soil properties. Scientifically, this thesis contributed to the development of methodologies, which aim to optimally use remote and proximal sensing (RS and PS) for DSM to facilitate regional soil mapping. The main contributions of this work with respect to the latter are (I) the critical evaluation of recent research achievements and identification of knowledge gaps for large-scale DSM using RS and PS data, (II) the development of a sparse RS-based sampling approach to represent major soil variability at regional scale, (III) the evaluation and development of different state-of-the-art methods to retrieve soil mineral information from PS, (IV) the improvement of spatially explicit soil prediction models and (V) the integration of RS and PS methods with geostatistical and DSM methods. A review on existing literature about the use of RS and PS for soil and terrain mapping was presented in Chapter 2. Recent work indicated the large potential of using RS and PS methods for DSM. However, for large-scale mapping, current methods will need to be extended beyond the plot. Improvements may be expected in the fields of developing more quantitative methods, enhanced geostatistical analysis and improved transferability to other areas. From these findings, three major research interests were selected: (I) soil sampling strategies, (II) retrieval of soil information from PS and (III) spatially continuous mapping of soil properties at larger scales using RS. Budgetary constraints, limited time and available soil legacy data restricted the soil data acquisition, presented in Chapter 3. A 15.000 km2 area located in Northern Morocco served as test case. Here, a sample was collected using constrained Latin Hypercube Sampling (cLHS) of RS and elevation data. The RS data served as proxy for soil variability, as alternative for the required soil legacy data supporting the sampling strategy. The sampling aim was to optimally sample the variability in the RS data while minimizing the acquisition efforts. This sample resulted in a dataset representing major soil variability. The cLHS sample failed to express spatial correlation; constraining the LHS by a distance criterion favoured large spatial variability over short distances. The absence of spatial correlation in the sampled soil variability precludes the use of additional geostatistical analyses to spatially predict soil properties. Predicting soil properties using the cLHS sample is thus restricted to a modelled statistical relation between the sample and exhaustive predictor variables. For this, the RS data provided the necessary spatial information because of the strong spatial correlation while the spectral information provided the variability of the environment (Chapter 3 and 6). Concluding, the RS-based cLHS approach is considered a time and cost efficient method for acquiring information on soil resources over extended areas. This sample was further used for developing methods to derive soil mineral information from PS, and to characterize regional soil mineralogy using RS. In Chapter 4, the influences of complex scattering within the mixture and overlapping absorption features were investigated. This was done by comparing the success of PRISM’s MICA in determining mineralogy of natural samples and modelled spectra. The modelled spectra were developed by a linearly forward model of reflectance spectra, using the fraction of known constituents within the sample. The modelled spectra accounted for the co-occurrence of absorption features but eluded the complex interaction between the components. It was found that more minerals could be determined with higher accuracy using modelled reflectance. The absorption features in the natural samples were less distinct or even absent, which hampered the classification routine. Nevertheless, grouping the individual minerals into mineral categories significantly improved the classification accuracy. These mineral categories are particularly useful for regional scale studies, as key soil property for parent material characterization and soil formation. Characterizing regional soil mineralogy by mineral categories was further described in Chapter 6. Retrieval of refined information from natural samples, such as mineral abundances, is more complex; estimating abundances requires a method that accounts for the interaction between minerals within the intimate mixture. This can be done by addressing the interaction with a non-linear model (Chapter 5). Chapter 5 showed that mineral abundances in complex mixtures could be estimated using absorption features in the 2.1–2.4 µm wavelength region. First, the absorption behaviour of mineral mixtures was parameterized by exponential Gaussian optimization (EGO). Next, mineral abundances were successfully predicted by regression tree analysis, using these parameters as inputs. Estimating mineral abundances using prepared mixes of calcite, kaolinite, montmorillonite and dioctahedral mica or field samples proved the validity of the proposed method. Estimating mineral abundances of field samples showed the necessity to deconvolve spectra by EGO. Due to the nature of the field samples, the simple representation of the complex scattering behaviour by a few Gaussian bands required the parameters asymmetry and saturation to accurately deconvolve the spectra. Also, asymmetry of the EGO profiles showed to be an important parameter for estimating the abundances of the field samples. The robustness of the method in handling the omission of minerals during the training phase was tested by replacing part of the quartz with chlorite. It was found that the accuracy of the predicted mineral content was hardly affected. Concluding, the proposed method allowed for estimating more than two minerals within a mixture. This approach advances existing PS methods and has the potential to quantify a wider set of soil properties. With this method the soil science community was provided an improved inference method to derive and quantify soil properties The final challenge of this thesis was to spatially explicit model regional soil mineralogy using the sparse sample from Chapter 3. Prediction models have especially difficulties relating predictor variables to sampled properties having high spatial correlation. Chapter 6 presented a methodology that improved prediction models by using scale-dependent spatial variability observed in RS data. Mineral predictions were made using the abundances from X-ray diffraction analysis and mineral categories determined by PRISM. The models indicated that using the original RS data resulted in lower model performance than those models using scaled RS data. Key to the improved predictions was representing the variability of the RS data at the same scale as the sampled soil variability. This was realized by considering the medium and long-range spatial variability in the RS data. Using Fixed Rank Kriging allowed smoothing the massive RS datasets to these ranges. The resulting images resembled more closely the regional spatial variability of soil and environmental properties. Further improvements resulted from using multi-scale soil-landscape relationships to predict mineralogy. The maps of predicted mineralogy showed agreement between the mineral categories and abundances. Using a geostatistical approach in combination with a small sample, substantially improves the feasibility to quantitatively map regional mineralogy. Moreover, the spectroscopic method appeared sufficiently detailed to map major mineral variability. Finally, this approach has the potential for modelling various natural resources and thereby enhances the perspective of a global system for inventorying and monitoring the earth’s soil resources. With this thesis it is demonstrated that RS and PS methods are an important but also an essential source for regional-scale DSM. Following the main findings from this thesis, it can be concluded that: Improvements in regional-scale DSM result from the integrated use of RS and PS with geostatistical methods. In every step of the soil mapping process, spectroscopy can play a key role and can deliver data in a time and cost efficient manner. Nevertheless, there are issues that need to be resolved in the near future. Research priorities involve the development of operational tools to quantify soil properties, sensor integration, spatiotemporal modelling and the use of geostatistical methods that allow working with massive RS datasets. This will allow us in the near future to deliver more accurate and comprehensive information about soils, soil resources and ecosystem services provided by soils at regional and, ultimately, global scale.</p

Identification of hydrocarbon microseepage induced alterations with spectral target detection and unmixing algorithms

Hydrocarbon micro and macro seeps alter chemical and mineral composition of the Earth's surface, providing prospects for detection with remote sensing tools. There have been several studies focusing on mapping these anomalies by utilizing ever evolving multispectral and hyperspectral imaging instruments, which has proven their capacity for mapping both hydrocarbons and hydrocarbon-induced alterations so far. These studies broadly comprise of methods like calculating band ratios, spectral angle mapping, spectral feature fitting, and principal component analysis as detection techniques. However, there is a lack of concentration on advanced signature based detection algorithms and unmixing methods for mapping surface manifestations of hydrocarbon micro seeps. Signature based detection algorithms utilize target spectra to correlate with each pixel's spectrum in order to allocate possible target locations. Unmixing methods, on the other hand, require no input spectra beforehand, aiming to resolve each pixel's spectral constituents and their corresponding abundance fractions. In this paper, the potential of all these methods in mapping microseepage related anomalies are evaluated by implementing and comparing them for Gemrik Anticline, one of the prospective hydrocarbon exploration fields in Turkey. Hence, it provides a complete knowledge on determination surface manifestations of hydrocarbon microseeps with the help of well known supervised target detection algorithms and hyperspectral unmixing algorithms. The study area is located in the Southeastern Anatolia, between the cities of Adwaman and Sanhurfa. The spectral signatures were collected with Analytical Spectral Devices Inc. (ASD) spectrometer during the field studies conducted by Avcioglu (2010), to be utilized as an input to the signature based detection algorithms as well as a reference to select the related abundance map among the outputs of unmixing methods. Advanced Space Borne Thermal Emission and Radiometer (ASTER) image of the study region, with an atmospheric correction before running the algorithms, is selected for the applications. Among the applied algorithms, Simplex Identification via Split Augmented Lagrangian (SISAL) is selected as a base of comparison, as it possess minimum calculated error metrics in the experiments. Another unmixing method, the Minimum Volume Simplex Algorithm (MVSA), and signature-based techniques, Desired Target Detection and Classification Algorithm (DTDCA) & Spectral Matched Filter (SMF) follow the success of the SISAL, respectively. The Crosta technique, which is performed as a conventional approach for experimental comparisons, has also shown its capability, succeeding these algorithms. The study provides an overall assessment for methodologies to be used for hydrocarbon microseepage mapping, which also serves guidance for further exploration studies in the region. The potential of ASTER data for hydrocarbon-induced alterations is also emphasized as a cost effective tool for the future applications