58,279 research outputs found
Multilevel Converters: An Enabling Technology for High-Power Applications
| Multilevel converters are considered today as the
state-of-the-art power-conversion systems for high-power and
power-quality demanding applications. This paper presents a
tutorial on this technology, covering the operating principle and
the different power circuit topologies, modulation methods,
technical issues and industry applications. Special attention is
given to established technology already found in industry with
more in-depth and self-contained information, while recent
advances and state-of-the-art contributions are addressed with
useful references. This paper serves as an introduction to the
subject for the not-familiarized reader, as well as an update or
reference for academics and practicing engineers working in
the field of industrial and power electronics.Ministerio de Ciencia y Tecnología DPI2001-3089Ministerio de Eduación y Ciencia d TEC2006-0386
Recent advances on recursive filtering and sliding mode design for networked nonlinear stochastic systems: A survey
Copyright © 2013 Jun Hu et al. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.Some recent advances on the recursive filtering and sliding mode design problems for nonlinear stochastic systems with network-induced phenomena are surveyed. The network-induced phenomena under consideration mainly include missing measurements, fading measurements, signal quantization, probabilistic sensor delays, sensor saturations, randomly occurring nonlinearities, and randomly occurring uncertainties. With respect to these network-induced phenomena, the developments on filtering and sliding mode design problems are systematically reviewed. In particular, concerning the network-induced phenomena, some recent results on the recursive filtering for time-varying nonlinear stochastic systems and sliding mode design for time-invariant nonlinear stochastic systems are given, respectively. Finally, conclusions are proposed and some potential future research works are pointed out.This work was supported in part by the National Natural Science Foundation of China under Grant nos. 61134009, 61329301, 61333012, 61374127 and 11301118, the Engineering and Physical Sciences Research Council (EPSRC) of the UK under Grant no. GR/S27658/01, the Royal Society of the UK, and the Alexander von Humboldt Foundation of Germany
A Novel Reduced Components Model Predictive Controlled Multilevel Inverter for Grid-Tied Applications
This paper presents an improved single-phase Multilevel Inverter (MLI) which is conceptualized to reduce power switches along with separate DC voltage sources. Compared with recent modular topologies, the proposed MLI employs a reduced number of components. The proposed inverter consists of a combination of two circuits, i.e., the level generation and polarity generation parts. The level generation part is used to synthesize different output voltage levels, while the polarity inversion is performed by a~conventional H-bridge circuit. The performance of the proposed topology has been studied using s single-phase seven-level inverter, which utilizes seven power switches and three independent DC voltage sources. Model Predictive Control (MPC) is applied to inject a sinusoidal current into the utility grid which exhibits low Total Harmonic Distortion (THD). Tests, including a~change in grid current amplitude as well as operation under variation in Power Factor (PF), have been performed to validate the good performance obtained using MPC. The effectiveness of the proposed seven-level inverter has been verified theoretically using MATLAB Simulink. In addition, Real-Time (RT) validation using the dSPACE-CP1103 has been performed to confirm the system performance and system operation using digital platforms. Simulation and RT results show improved THD at 1.23% of injected current
Fuzzy-logic-based control, filtering, and fault detection for networked systems: A Survey
This paper is concerned with the overview of the recent progress in fuzzy-logic-based filtering, control, and fault detection problems. First, the network technologies are introduced, the networked control systems are categorized from the aspects of fieldbuses and industrial Ethernets, the necessity of utilizing the fuzzy logic is justified, and the network-induced phenomena are discussed. Then, the fuzzy logic control strategies are reviewed in great detail. Special attention is given to the thorough examination on the latest results for fuzzy PID control, fuzzy adaptive control, and fuzzy tracking control problems. Furthermore, recent advances
on the fuzzy-logic-based filtering and fault detection problems are reviewed. Finally, conclusions are given and some possible future research directions are pointed out, for example, topics on two-dimensional networked systems, wireless networked control systems, Quality-of-Service (QoS) of networked systems, and fuzzy access control in open networked systems.This work was supported in part by the National Natural Science Foundation of China under Grants 61329301,
61374039, 61473163, and 61374127, the Hujiang Foundation of China under Grants C14002 andD15009, the Engineering and Physical Sciences Research Council (EPSRC) of the UK, the Royal Society of the UK, and the Alexander von Humboldt Foundation of Germany
The Essential Role and the Continuous Evolution of Modulation Techniques for Voltage-Source Inverters in the Past, Present, and Future Power Electronics
The cost reduction of power-electronic devices, the increase in their reliability, efficiency, and power capability, and lower development times, together with more demanding application requirements, has driven the development of several new inverter topologies recently introduced in the industry, particularly medium-voltage converters. New more complex inverter topologies and new application fields come along with additional control challenges, such as voltage imbalances, power-quality issues, higher efficiency needs, and fault-tolerant operation, which necessarily requires the parallel development of modulation schemes. Therefore, recently, there have been significant advances in the field of modulation of dc/ac converters, which conceptually has been dominated during the last several decades almost exclusively by classic pulse-width modulation (PWM) methods. This paper aims to concentrate and discuss the latest developments on this exciting technology, to provide insight on where the state-of-the-art stands today, and analyze the trends and challenges driving its future
On the Use of the p-q Theory for Harmonic Current Cancellation with Shunt Active Filters
Discussion and mathematical proof on necessary and sufficient conditions for the application of the {p-q} theory for compensating the harmonic currents consumed by non-linear load using a shunt active filter are presented. These conditions over instantaneous active and reactive powers were not addressed before and must be considered on the design of new control strategies based on {p-q} theory. Theoretical demonstration is proposed and an application example with simulations results is used to validate the theoretical results
Evolution and Modern Approaches for Thermal Analysis of Electrical Machines
In this paper, the authors present an extended survey on the evolution and the modern approaches in the thermal analysis of electrical machines. The improvements and the new techniques proposed in the last decade are analyzed in depth and compared in order to highlight the qualities and defects of each. In particular, thermal analysis based on lumped-parameter thermal network, finite-element analysis, and computational fluid dynamics are considered in this paper. In addition, an overview of the problems linked to the thermal parameter determination and computation is proposed and discussed. Taking into account the aims of this paper, a detailed list of books and papers is reported in the references to help researchers interested in these topics
A survey on modeling of microgrids - from fundamental physics to phasors and voltage sources
Microgrids have been identified as key components of modern electrical
systems to facilitate the integration of renewable distributed generation
units. Their analysis and controller design requires the development of
advanced (typically model-based) techniques naturally posing an interesting
challenge to the control community. Although there are widely accepted reduced
order models to describe the dynamic behavior of microgrids, they are typically
presented without details about the reduction procedure---hampering the
understanding of the physical phenomena behind them. Preceded by an
introduction to basic notions and definitions in power systems, the present
survey reviews key characteristics and main components of a microgrid. We
introduce the reader to the basic functionality of DC/AC inverters, as well as
to standard operating modes and control schemes of inverter-interfaced power
sources in microgrid applications. Based on this exposition and starting from
fundamental physics, we present detailed dynamical models of the main microgrid
components. Furthermore, we clearly state the underlying assumptions which lead
to the standard reduced model with inverters represented by controllable
voltage sources, as well as static network and load representations, hence,
providing a complete modular model derivation of a three-phase inverter-based
microgrid
- …