Towards efficient coexistence of IEEE 802.15.4e TSCH and IEEE 802.11

A major challenge in wide deployment of smart wireless devices, using different technologies and sharing the same 2.4 GHz spectrum, is to achieve coexistence across multiple technologies. The IEEE~802.11 (WLAN) and the IEEE 802.15.4e TSCH (WSN) where designed with different goals in mind and both play important roles for respective applications. However, they cause mutual interference and degraded performance while operating in the same space. To improve this situation we propose an approach to enable a cooperative control which type of network is transmitting at given time, frequency and place. We recognize that TSCH based sensor network is expected to occupy only small share of time, and that the nodes are by design tightly synchronized. We develop mechanism enabling over-the-air synchronization of the Wi-Fi network to the TSCH based sensor network. Finally, we show that Wi-Fi network can avoid transmitting in the "collision periods". We provide full design and show prototype implementation based on the Commercial off-the-shelf (COTS) devices. Our solution does not require changes in any of the standards.Comment: 8 page

A Case for Time Slotted Channel Hopping for ICN in the IoT

Recent proposals to simplify the operation of the IoT include the use of Information Centric Networking (ICN) paradigms. While this is promising, several challenges remain. In this paper, our core contributions (a) leverage ICN communication patterns to dynamically optimize the use of TSCH (Time Slotted Channel Hopping), a wireless link layer technology increasingly popular in the IoT, and (b) make IoT-style routing adaptive to names, resources, and traffic patterns throughout the network--both without cross-layering. Through a series of experiments on the FIT IoT-LAB interconnecting typical IoT hardware, we find that our approach is fully robust against wireless interference, and almost halves the energy consumed for transmission when compared to CSMA. Most importantly, our adaptive scheduling prevents the time-slotted MAC layer from sacrificing throughput and delay

DTLS Performance in Duty-Cycled Networks

The Datagram Transport Layer Security (DTLS) protocol is the IETF standard for securing the Internet of Things. The Constrained Application Protocol, ZigBee IP, and Lightweight Machine-to-Machine (LWM2M) mandate its use for securing application traffic. There has been much debate in both the standardization and research communities on the applicability of DTLS to constrained environments. The main concerns are the communication overhead and latency of the DTLS handshake, and the memory footprint of a DTLS implementation. This paper provides a thorough performance evaluation of DTLS in different duty-cycled networks through real-world experimentation, emulation and analysis. In particular, we measure the duration of the DTLS handshake when using three duty cycling link-layer protocols: preamble-sampling, the IEEE 802.15.4 beacon-enabled mode and the IEEE 802.15.4e Time Slotted Channel Hopping mode. The reported results demonstrate surprisingly poor performance of DTLS in radio duty-cycled networks. Because a DTLS client and a server exchange more than 10 signaling packets, the DTLS handshake takes between a handful of seconds and several tens of seconds, with similar results for different duty cycling protocols. Moreover, because of their limited memory, typical constrained nodes can only maintain 3-5 simultaneous DTLS sessions, which highlights the need for using DTLS parsimoniously.Comment: International Symposium on Personal, Indoor and Mobile Radio Communications (PIMRC - 2015), IEEE, IEEE, 2015, http://pimrc2015.eee.hku.hk/index.htm

A Performance-to-Cost Analysis of IEEE 802.15.4 MAC With 802.15.4e MAC Modes

[EN] The IEEE 802.15.4 standard is one of the widely adopted networking specification for Internet of Things (IoT). It defines several physical layer (PHY) options and medium access control (MAC) sub-layer protocols for interconnection of constrained wireless devices. These devices are usually battery-powered and need to support requirements like low-power consumption and low-data rates. The standard has been revised twice to incorporate new PHY layers and improvements learned from implementations. Research in this direction has been primarily centered around improving the energy consumption of devices. Recently, to meet specific Quality-of-Service (QoS) requirements of different industrial applications, the IEEE 802.15.4e amendment was released that focuses on improving reliability, robustness and latency. In this paper, we carry out a performance-to-cost analysis of Deterministic and Synchronous Multi-channel Extension (DSME) and Time-slotted Channel Hopping (TSCH) MAC modes of IEEE 802.15.4e with 802.15.4 MAC protocol to analyze the trade-off of choosing a particular MAC mode over others. The parameters considered for performance are throughput and latency, and the cost is quantified in terms of energy. A Markov model has been developed for TSCH MAC mode to compare its energy costs with 802.15.4 MAC. Finally, we present the applicability of different MAC modes to different application scenarios.This work was supported in part by the SERB, DST, Government of India under Grant ECRA/2016/001651.Choudhury, N.; Matam, R.; Mukherjee, M.; Lloret, J. (2020). A Performance-to-Cost Analysis of IEEE 802.15.4 MAC With 802.15.4e MAC Modes. IEEE Access. 8:41936-41950. https://doi.org/10.1109/ACCESS.2020.2976654S4193641950

Alternate marking-based network telemetry for industrial WSNs

For continuous, persistent and problem-free operation of Industrial Wireless Sensor Networks (IWSN), it is critical to have visibility and awareness into what is happening on the network at any one time. Especially, for the use cases with strong needs for deterministic and real-time network services with latency and reliability guarantees, it is vital to monitor network devices continuously to guarantee their functioning, detect and isolate relevant problems and verify if all system requirements are being met simultaneously. In this context, this article investigates a light-weight telemetry solution for IWSNs, which enables the collection of accurate and continuous flowbased telemetry information, while adding no overhead on the monitored packets. The proposed monitoring solution adopts the recent Alternate Marking Performance Monitoring (AMPM) concept and mainly targets measuring end-to-end and hopby-hop reliability and delay performance in critical application flows. Besides, the technical capabilities and characteristics of the proposed solution are evaluated via a real-life implementation and practical experiments, validating its suitability for IWSNs

Energy Efficient and Reliable Wireless Sensor Networks - An Extension to IEEE 802.15.4e

Collecting sensor data in industrial environments from up to some tenth of battery powered sensor nodes with sampling rates up to 100Hz requires energy aware protocols, which avoid collisions and long listening phases. The IEEE 802.15.4 standard focuses on energy aware wireless sensor networks (WSNs) and the Task Group 4e has published an amendment to fulfill up to 100 sensor value transmissions per second per sensor node (Low Latency Deterministic Network (LLDN) mode) to satisfy demands of factory automation. To improve the reliability of the data collection in the star topology of the LLDN mode, we propose a relay strategy, which can be performed within the LLDN schedule. Furthermore we propose an extension of the star topology to collect data from two-hop sensor nodes. The proposed Retransmission Mode enables power savings in the sensor node of more than 33%, while reducing the packet loss by up to 50%. To reach this performance, an optimum spatial distribution is necessary, which is discussed in detail

Impact of mobility on the IoT MAC infrastructure: IEEE 802.15.4e TSCH and LLDN platform

Realizing the target of high reliability and availability is a crucial concept in the IoT context. Different types of IoT applications introduce several requirements and obstacles. One of the important aspects degrading network performance is the node mobility inside the network. Without a solid and adaptive mechanism, node mobility can disrupt the network performance due to dissociations from the network. Hence, reliable techniques must be incorporated to tackle the overhead of node movement. In this paper, the overhead of mobility on both IEEE 802.15.4e timeslotted channel hopping (TSCH) and low latency deterministic (LLDN) modes is investigated. These two modes can be considered as the MAC layer of the IoT paradigm because of their importance and resilience to different network obstacles. In addition, the set of metrics and limitations that influence the network survivability will be identified to ensure efficient mobile node handling process. Both TSCH and LLDN have been implemented via the Contiki OS to determine their functionality. TSCH has been demonstrated to have better node connectivity due to the impact of frame collision in LLDN. In addition, by neglecting the overhead of collision, the LLDN has been shown to have better connectivity and low radio duty cycle (RDC)

Efficiency enhancement using optimized static scheduling technique in TSCH networks

In recent times, the reliable and real-time data transmission becomes a mandatory requirement for various industries and organizations due to the large utilization of Internet of Things (IoT) devices. However, the IoT devices need high reliability, precise data exchange and low power utilization which cannot be achieved by the conventional Medium Access Control (MAC) protocols due to link failures and high interferences in the network. Therefore, the Time-Slotted Channel Hopping (TSCH) networks can be used for link scheduling under the IEEE 802.15.4e standard. In this paper, we propose an Optimized Static Scheduling Technique (OSST) for the link scheduling in IEEE 802.15.4e based TSCH networks. In OSST the link schedule is optimized by considering the packet latency information during transmission by checking the status of the transmitted packets as well as keeping track of the lost data packets from source to destination nodes. We evaluate the proposed OSST model using 6TiSCH Simulator and compare the different performance metrics with Simple distributed TSCH Scheduling