Augmenting Wide-band 802.11 Transmissions via Unequal Packet Bit Protection

Due to frequency selective fading, modern wide-band 802.11 transmissions have unevenly distributed bit BERs in a packet. In this paper, we propose to unequally protect packet bits according to their BERs. By doing so, we can best match the effective transmission rate of each bit to channel condition, and improve throughput. The major design challenge lies in deriving an accurate relationship between the frequency selective channel condition and the decoded packet bit BERs, all the way through the complex 802.11 PHY layer. Based on our study, we find that the decoding error of a packet bit corresponds to dense errors in the underlying codeword bits, and the BER can be truthfully approximated by the codeword bit error density. With above observation, we propose UnPKT, scheme that protects packet bits using different MAC-layer FEC redundancies based on bit-wise BER estimation to augment wide-band 802.11 transmissions. UnPKT is software-implementable and compatible with the existing 802.11 architecture. Extensive evaluations based on Atheros 9580 NICs and GNU-Radio platforms show the effectiveness of our design. UnPKT can achieve a significant goodput improvement over state-of-the-art approaches

Achieving reliable and enhanced communication in vehicular ad hoc networks (VANETs)

A thesis submitted to the University of Bedfordshire in partial fulfilment of the requirement for the degree of Doctor of PhilosophyWith the envisioned age of Internet of Things (IoTs), different aspects of Intelligent Transportation System (ITS) will be linked so as to advance road transportation safety, ease congestion of road traffic, lessen air pollution, improve passenger transportation comfort and significantly reduce road accidents. In vehicular networks, regular exchange of current position, direction, speed, etc., enable mobile vehicle to foresee an imminent vehicle accident and notify the driver early enough in order to take appropriate action(s) or the vehicle on its own may take adequate preventive measures to avert the looming accident. Actualizing this concept requires use of shared media access protocol that is capable of guaranteeing reliable and timely broadcast of safety messages. This dissertation investigates the use of Network Coding (NC) techniques to enrich the content of each transmission and ensure improved high reliability of the broadcasted safety messages with less number of retransmissions. A Code Aided Retransmission-based Error Recovery (CARER) protocol is proposed. In order to avoid broadcast storm problem, a rebroadcasting vehicle selection metric η, is developed, which is used to select a vehicle that will rebroadcast the received encoded message. Although the proposed CARER protocol demonstrates an impressive performance, the level of incurred overhead is fairly high due to the use of complex rebroadcasting vehicle selection metric. To resolve this issue, a Random Network Coding (RNC) and vehicle clustering based vehicular communication scheme with low algorithmic complexity, named Reliable and Enhanced Cooperative Cross-layer MAC (RECMAC) scheme, is proposed. The use of this clustering technique enables RECMAC to subdivide the vehicular network into small manageable, coordinated clusters which further improve transmission reliability and minimise negative impact of network overhead. Similarly, a Cluster Head (CH) selection metric ℱ(\u1d457) is designed, which is used to determine and select the most suitably qualified candidate to become the CH of a particular cluster. Finally, in order to investigate the impact of available radio spectral resource, an in-depth study of the required amount of spectrum sufficient to support high transmission reliability and minimum latency requirements of critical road safety messages in vehicular networks was carried out. The performance of the proposed schemes was clearly shown with detailed theoretical analysis and was further validated with simulation experiments

Power-Constrained Fuzzy Logic Control of Video Streaming over a Wireless Interconnect

Wireless communication of video, with Bluetooth as an example, represents a compromise between channel conditions, display and decode deadlines, and energy constraints. This paper proposes fuzzy logic control (FLC) of automatic repeat request (ARQ) as a way of reconciling these factors, with a 40% saving in power in the worst channel conditions from economizing on transmissions when channel errors occur. Whatever the channel conditions are, FLC is shown to outperform the default Bluetooth scheme and an alternative Bluetooth-adaptive ARQ scheme in terms of reduced packet loss and delay, as well as improved video quality

Embracing corruption burstiness: Fast error recovery for ZigBee under wi-Fi interference

This is the author accepted manuscript. The final version is available from the publisher via the DOI in this record.The ZigBee communication can be easily and severely interfered by Wi-Fi traffic. Error recovery, as an important means for ZigBee to survive Wi-Fi interference, has been extensively studied in recent years. The existing works add upfront redundancy to in-packet blocks for recovering a certain number of random corruptions. Therefore the bursty nature of ZigBee in-packet corruptions under Wi-Fi interference is often considered harmful, since some blocks are full of errors which cannot be recovered and some blocks have no errors but still requiring redundancy. As a result, they often use interleaving to reshape the bursty errors, before applying complex FEC codes to recover the re-shaped random distributed errors. In this paper, we take a different view that burstiness may be helpful. With burstiness, the in-packet corruptions are often consecutive and the requirement for error recovery is reduced as ”recovering any k consecutive errors” instead of ”recovering any random k errors”. This lowered requirement allows us to design far more efficient code than the existing FEC codes. Motivated by this implication, we exploit the corruption burstiness to design a simple yet effective error recovery code using XOR operations (called ZiXOR). ZiXOR uses XOR code and the delay is significantly reduced. More, ZiXOR uses RSSI-hinted approach to detect in packet corruptions without CRC, incurring almost no extra transmission overhead. The testbed evaluation results show that ZiXOR outperforms the state-of-the-art works in terms of the throughput (by 47%) and latency (by 22%)This work was supported by the National Natural Science Foundation of China (No. 61602095 and No. 61472360), the Fundamental Research Funds for the Central Universities (No. ZYGX2016KYQD098 and No. 2016FZA5010), National Key Technology R&D Program (Grant No. 2014BAK15B02), CCFIntel Young Faculty Researcher Program, CCF-Tencent Open Research Fund, China Ministry of Education—China Mobile Joint Project under Grant No. MCM20150401 and the EU FP7 CLIMBER project under Grant Agreement No. PIRSES-GA- 2012-318939. Wei Dong is the corresponding author

Evaluations and Enhancements in 802.11n WLANs – Error-Sensitive Adaptive Frame Aggregation

IEEE 802.11n is a developing next-generation standard for wireless local area network (LAN). Seamless multimedia traffic connection will become possible with the 802.11n improvement in the Physical and MAC layer. The new 802.11n frame aggregation technique is particularly important for enhancing MAC layer efficiency under high speed wireless LAN. Although the frame aggregation can increase the efficiency in the MAC layer, it does not provide good performance in high BER channels when using large frame aggregation size. An Optimal Frame Aggregation (OFA) technique for AMSDU frame under different BERs in 802.11n WLANs was proposed. However, the suggested algorithm does not take into account the loss rate and the delay performance requirements for Voice or Video multimedia traffic in various BER channels. The optimal frame size can provide good throughput in the network, but the delay might exceed the Quality of Service (QoS) requirement of Voice traffic or the Frame-Error-Rate (FER) might exceed the maximum loss rate tolerable by the streaming Video traffic. We propose an Error- Sensitive Adaptive Frame Aggregation (ESAFA) scheme which can dynamically set the size of AMSDU frame based on the maximum Frame-Error-Rate (FER) tolerable by a particular multimedia traffic. The simulations show that our adaptive algorithm outperforms the optimal frame algorithm by improving both the delay and the loss rate in the 802.11n WLANs. The measured FER of the Error-Sensitive Adaptive Frame Aggregation scheme can be kept at about the same as the loss rate requirement for Video traffic even under high Bit-Error-Rate (BER) channel. The delay compared to OFA is also decreased by around 50% under different channel conditions. Moreover, the results show that the Error-Sensitive Adaptive Frame Aggregation scheme works particularly well in error-prone wireless networks

Frequency Domain Backoff for Continuous Beamforming Space Division Multiple Access on Massive MIMO Wireless Backhaul Systems

This paper newly proposes a frequency domain backoff scheme dedicated to continuous beamforming space division multiple access (CB-SDMA) on massive antenna systems for wireless entrance (MAS-WE). The entrance base station (EBS) has individual base band signal processing units for respective relay stations (RSs) to be accommodated. EBS then continuously applies beamforming weight to transmission/reception signals. CB-SDMA yields virtual point-to-point backhaul link where radio resource control messages and complicated multiuser scheduling are not required. This simplified structure allows RSs to work in a distributed manner. However, one issue remains to be resolved; overloaded multiple access resulting in collision due to its random access nature. The frequency domain backoff mechanism is introduced instead of the time domain one. It can flexibly avoid co-channel interference caused by excessive spatial multiplexing. Computer simulation verifies its superiority in terms of system throughput and packet delay

Aggregation with fragment retransmission for very high-speed WLANs

In upcoming very high-speed WLANs the physical layer (PHY) rate may reach 600 Mbps. To achieve high efficiency at the medium access control (MAC) layer, we identify fundamental properties that must be satisfied by any CSMA/CA based MAC layer and develop a novel scheme called Aggregation with Fragment Retransmission (AFR). In the AFR scheme, multiple packets are aggregated into and transmitted in a single large frame. If errors happen during the transmission, only the corrupted fragments of the large frame are retransmitted. An analytic model is developed to evaluate the throughput and delay performance of AFR over a noisy channel, and to compare AFR with competing schemes in the literature. Optimal frame and fragment sizes are calculated using this model. Transmission delays are minimised by using a zero-waiting mechanism where frames are transmitted immediately once the MAC wins a transmission opportunity. We prove that zero waiting can achieve maximum throughput. As a complement to the theoretical analysis, we investigate by simulations the impact of AFR on the performance of realistic application traffic with diverse requirements. We have implemented the AFR scheme in the NS-2 simulator and present detailed results for TCP, VoIP and HDTV traffic. The AFR scheme described was developed as part of the 802.11n working group work. The analysis presented here is general enough to be extended to the proposed scheme in the upcoming 802.11n standard. Trends indicated by our simulation results should extend to any well-designed aggregation scheme

Multicast MAC extensions for high rate real-time traffic in wireless LANs

Nowadays we are rapidly moving from a mainly textual-based to a multimedia-based Internet, for which the widely deployed IEEE 802.11 wireless LANs can be one of the promising candidates to make them available to users anywhere, anytime, on any device. However, it is still a challenge to support group-oriented real-time multimedia services, such as video-on-demand, video conferencing, distance educations, mobile entertainment services, interactive games, etc., in wireless LANs, as the current protocols do not support multicast, in particular they just send multicast packets in open-loop as broadcast packets, i.e., without any possible acknowledgements or retransmissions. In this thesis, we focus on MAC layer reliable multicast approaches which outperform upper layer ones with both shorter delays and higher efficiencies. Different from polling based approaches, which suffer from long delays, low scalabilities and low efficiencies, we explore a feedback jamming mechanism where negative acknowledgement (NACK) frames are allowed from the non-leader receivers to destroy the acknowledgement (ACK) frame from the single leader receiver and prompts retransmissions from the sender. Based on the feedback jamming scheme, we propose two MAC layer multicast error correction protocols, SEQ driven Leader Based Protocol (SEQ-LBP) and Hybrid Leader Based Protocol (HLBP), the former is an Automatic Repeat reQuest (ARQ) scheme while the later combines both ARQ and the packet level Forward Error Correction (FEC). We evaluate the feedback jamming probabilities and the performances of SEQ-LBP and HLBP based on theoretical analyses, NS-2 simulations and experiments on a real test-bed built with consumer wireless LAN cards. Test results confirm the feasibility of the feedback jamming scheme and the outstanding performances of the proposed protocols SEQ-LBP and HLBP, in particular SEQ-LBP is good for small multicast groups due to its short delay, effectiveness and simplicity while HLBP is better for large multicast groups because of its high efficiency and high scalability with respect to the number of receivers per group.Zurzeit vollzieht sich ein schneller Wechsel vom vorwiegend textbasierten zum multimediabasierten Internet. Die weitverbreiteten IEEE 802.11 Drahtlosnetzwerke sind vielversprechende Kandidaten, um das Internet für Nutzer überall, jederzeit und auf jedem Gerät verfügbar zu machen. Die Unterstützung gruppenorientierter Echtzeit-Dienste in drahtlosen lokalen Netzen ist jedoch immer noch eine Herausforderung. Das liegt daran, dass aktuelle Protokolle keinen Multicast unterstützen. Sie senden Multicast-Pakete vielmehr in einer "Open Loop"-Strategie als Broadcast-Pakete, d. h. ohne jegliche Rückmeldung (feedback) oder Paketwiederholungen. In der vorliegenden Arbeit, anders als in den auf Teilnehmereinzelabfragen (polling) basierenden Ansätzen, die unter langen Verzögerungen, geringer Skalierbarkeit und geringer Effizienz leiden, versuchen wir, Multicast-Feedback bestehend aus positiven (ACK) und negativen Bestätigungen (NACK) auf MAC-Layer im selben Zeitfenster zu bündeln. Die übrigen Empfänger können NACK-Frames senden, um das ACK des Leaders zu zerstören und Paketwiederholungen zu veranlassen. Basierend auf einem Feedback-Jamming Schema schlagen wir zwei MAC-Layer-Protokolle für den Fehlerschutz im Multicast vor: Das SEQ-getriebene Leader Based Protocol (SEQ-LBP) und das Hybrid Leader Based Protocol (HLBP). SEQ-LBP ist eines Automatic Repeat reQuest (ARQ) Schema. HLBP kombiniert ARQ und paketbasierte Forward Error Correction (FEC). Wir evaluieren die Leistungsfähigkeit von ACK/NACK jamming, SEQ-LBP und HLBP durch Analysis, Simulationen in NS-2, sowie Experimenten in einer realen Testumgebung mit handelsüblichen WLAN-Karten. Die Testergebnisse bestätigen die Anwendbarkeit der Feedback-Jamming Schemata und die herausragende Leistungsfähigkeit der vorgestellten Protokolle SEQ-LBP und HLBP. SEQ-LBP ist durch seine kurze Verzögerung, seine Effektivität und seine Einfachheit für kleine Multicast-Gruppen nützlich, während HLBP auf Grund seiner hohen Effizienz und Skalierbarkeit im Bezug auf die Größe der Empfänger eher in großen Multicast-Gruppen anzuwenden ist