The Essential Role and the Continuous Evolution of Modulation Techniques for Voltage-Source Inverters in the Past, Present, and Future Power Electronics

The cost reduction of power-electronic devices, the increase in their reliability, efficiency, and power capability, and lower development times, together with more demanding application requirements, has driven the development of several new inverter topologies recently introduced in the industry, particularly medium-voltage converters. New more complex inverter topologies and new application fields come along with additional control challenges, such as voltage imbalances, power-quality issues, higher efficiency needs, and fault-tolerant operation, which necessarily requires the parallel development of modulation schemes. Therefore, recently, there have been significant advances in the field of modulation of dc/ac converters, which conceptually has been dominated during the last several decades almost exclusively by classic pulse-width modulation (PWM) methods. This paper aims to concentrate and discuss the latest developments on this exciting technology, to provide insight on where the state-of-the-art stands today, and analyze the trends and challenges driving its future

Multilevel Converters: An Enabling Technology for High-Power Applications

| Multilevel converters are considered today as the state-of-the-art power-conversion systems for high-power and power-quality demanding applications. This paper presents a tutorial on this technology, covering the operating principle and the different power circuit topologies, modulation methods, technical issues and industry applications. Special attention is given to established technology already found in industry with more in-depth and self-contained information, while recent advances and state-of-the-art contributions are addressed with useful references. This paper serves as an introduction to the subject for the not-familiarized reader, as well as an update or reference for academics and practicing engineers working in the field of industrial and power electronics.Ministerio de Ciencia y Tecnología DPI2001-3089Ministerio de Eduación y Ciencia d TEC2006-0386

Switching Frequency Effects on the Efficiency and Harmonic Distortion in a Three-Phase Five-Level CHBMI Prototype with Multicarrier PWM Schemes: Experimental Analysis

The current climatic scenario requires the use of innovative solutions to increase the production of electricity from renewable energy sources. Multilevel Power Inverters are a promising solution to improve the penetration of renewable energy sources into the electrical grid. Moreover, the performance of MPIs is a function of the modulation strategy employed and of its features (modulation index and switching frequency). This paper presents an extended and experimental analysis of three-phase five-level Cascaded H-Bridges Multilevel Inverter performance in terms of efficiency and harmonic content considering several MC PWM modulation strategies. In detail, the CHBMI performance is analyzed by varying the modulation index and the switching frequency. For control purposes, the NI System On Module sbRIO-9651 control board, a dedicated FPGA-based control board for power electronics and drive applications programmable in the LabVIEW environment, is used. The paper describes the modulation strategies implementation, the test bench set-up, and the experimental investigations carried out. The results obtained in terms of Total Harmonic Distorsion (THD) and efficiency are analyzed, compared, and discussed

A Generalized Predictive Controlled T-type power inverter with a deterministic dc-link capacitor voltage balancing approach

The thesis consists of implementing a Generalized Predictive Control (GPC) strategy for controlling the output voltage of the T-type converter with output LC filter, whose control signals are modulated by a fast three-dimensional Space Vector Modulation (SVM). The GPC strategy used for the T-type converter involves developing a system of dynamic equations from the output LC filter and load, which is transformed to a Controlled Auto-Regressive and Moving-Average (CARIMA) model in order to obtain a sequence of control signals, so that a cost function is optimized and the reference is tracked. The core of the thesis addresses the main problem of dc-link capacitor balancing. This is done by modeling the converter and deploying a mathematical analysis of the capacitor voltage difference dynamics, by singular perturbation approach. This analysis results in an explicit sinusoidal disturbance. Now, classical control theory is applied by using a Luenberger Observer (LO) in order to estimate the disturbance and encounter it, thereby keeping the dc-link capacitor voltage balanced in the due flow of the modulation and output voltage control. By this method, the output voltage across the filter capacitor is controlled, the dc-link capacitor voltage is balanced and the lowfrequency voltage ripples present in the dc-link of the T-type converter are reduced to an acceptable level.Máster en Electrónica, Tratamiento de Señal y Comunicacione

Hybrid modulation technique with dc-bus voltage control for multiphase NPC converters

The paper presents a novel Carrier-Based Pulse Width Modulation (CBPWM) technique for multiphase Neutral Point Clamped (NPC) converters. The technique is aimed to actively control the Neutral Point (NP) potential while supplying the desired set of line-to-line voltages to the load. Standard techniques are either based on the sole Common Mode Voltage Injection (CMI) or on the sole Multi-Step (MS) switching mode; contrarily, the proposed algorithm combines these two approaches to take advantage of their main benefits. The technique performs well for each number of phases, for each modulation index and for each type of load. It can control in closed-loop the NP voltage to any desirable value with a reduced number of switching transitions. The proposed approach has been experimentally validated and compared with other carrier-based algorithms

Selective harmonic elimination in awide modulation range using modified Newton-raphson and pattern generation methods for a multilevel inverter

Considering the aim of having low switching losses, especially in medium-voltage and high-power converters, the pre-programmed pulse width modulation technique is very useful because the generated harmonic content can be known in advance and optimized. Among the different low switching frequency techniques, the Selective Harmonics Elimination (SHE) modulation method is most suitable because of its direct control over the harmonic spectrum. This paper proposes a method for obtaining multiple solutions for selectively eliminating specific harmonics in a wide range of modulation indices by using modified Newton-Raphson (NR) and pattern generation techniques. The different pattern generation and synthesis approach provide more degrees of freedom and a way to operate the converter in a wide range of modulation. The modified Newton-Raphson technique is not complex and ensures fast convergence on a solution. Moreover, multiple solutions are obtained by keeping a very small increase in the modulation index. In the previous methods, solutions were not obtainable at all modulation indices. In this paper, only exact solutions to the low-order harmonics elimination for Cascaded H-bridge inverter are reported for all modulation indices. Analytical and simulation results prove the robustness and correctness of the technique proposed in this paper. 2018 by the authors.Acknowledgments: This (publication, report, etc.) was made possible by NPRP grant # [X-033-2-007] from the Qatar National Research Fund (a member of Qatar Foundation).Scopu

Hybrid Modulation Technique with DC-Bus Voltage Control for Multiphase NPC Converters

The article presents a novel carrier-based pulsewidth modulation technique for multiphase neutral point clamped converters. The technique is aimed to actively control the neutral point (NP) potential while supplying the desired set of line-to-line voltages to the load. Standard techniques are either based on the sole common mode voltage injection or on the sole multistep switching mode; contrarily, the proposed algorithm combines these two approaches to take advantage of their main benefits. The technique performs well for each number of phases, for each modulation index, and for each type of load. It can control in closed-loop the NP voltage to any desirable value with a reduced number of switching transitions. The proposed approach has been experimentally validated and compared with other carrier-based algorithms

Experimental Validation of a quasi Z-Source Modular Multilevel Converter with DC Fault Blocking Capability

This paper considers the design methodology and the modulation of the quasi Z-source modular multilevel converter (qZS-MMC) with half bridge sub-modules and evaluates its performance in voltage boosting mode for medium voltage applications. The qZS-MMC consists of two quasi Z-source networks inserted between the two terminals of the DC input source and the DC-link terminals of a modular multilevel converter (MMC), which allows the generation of an output voltage larger than the input DC voltage. Two modulation schemes have been analysed based on a mathematical derivation for the converter internal voltages, currents, and stored energy. The quasi Z-source circuit is proven to provide the qZS-MMC with half bridge sub-modules to deal with DC-faults. The experimental results validate the performance of the proposed modulation schemes and the DC-fault blocking capability of the qZS MMC. Finally, the losses of the qZS-MMC is compared against a standard MMC using full bridge sub-modules that can also provide DC fault capability. The range in which the qZS-MMC is more efficient has been identified. Furthermore, the qZS-MMC can provide a significant reduction in number of semiconductor power devices with the same performance

Industrial and Technological Applications of Power Electronics Systems

The Special Issue "Industrial and Technological Applications of Power Electronics Systems" focuses on: - new strategies of control for electric machines, including sensorless control and fault diagnosis; - existing and emerging industrial applications of GaN and SiC-based converters; - modern methods for electromagnetic compatibility. The book covers topics such as control systems, fault diagnosis, converters, inverters, and electromagnetic interference in power electronics systems. The Special Issue includes 19 scientific papers by industry experts and worldwide professors in the area of electrical engineering

Input switched closed-loop single phase SEPIC controlled rectifier with improved performances

DC power supply has become the driving source for some essential modern applications. Thereby, DC power conditioning has become a significant issue for engineers. Typically used rectifiers associated with a bridge structure is nonlinear in nature. Thereby, the current at input side of the rectifier contains harmonics, which also flow through the power line. The presence of harmonics causes several interruptions and reduce power quality. In this regard, a new close loop SEPIC controlled rectifier is proposed in this paper. The conventional scheme is arranged with a rectifier connected to a DC-DC converter, which is an open loop system. Consequently, such system cannot regulate voltage at load varying condition. The proposed SEPIC controlled rectifier can regulate voltage under load varying condition for a wide range. Additionally, the performance in terms of total harmonic distortion (THD) of input current and power factor at AC side are also within satisfactory range for the closed loop configuration. The controlled rectifier has four operating phases associated with switching states and input voltage polarity. The close loop configuration also incorporates a current and a voltage loop at the feedback path. The comparative studies have been performed among the proposed closed loop construction, the open-loop structure as well as the conventional construction. The effectiveness of the proposed controlled rectifier is verified in terms of THD and input power factor considering the results obtained from simulation