MARACAS: a real-time multicore VCPU scheduling framework

This paper describes a multicore scheduling and load-balancing framework called MARACAS, to address shared cache and memory bus contention. It builds upon prior work centered around the concept of virtual CPU (VCPU) scheduling. Threads are associated with VCPUs that have periodically replenished time budgets. VCPUs are guaranteed to receive their periodic budgets even if they are migrated between cores. A load balancing algorithm ensures VCPUs are mapped to cores to fairly distribute surplus CPU cycles, after ensuring VCPU timing guarantees. MARACAS uses surplus cycles to throttle the execution of threads running on specific cores when memory contention exceeds a certain threshold. This enables threads on other cores to make better progress without interference from co-runners. Our scheduling framework features a novel memory-aware scheduling approach that uses performance counters to derive an average memory request latency. We show that latency-based memory throttling is more effective than rate-based memory access control in reducing bus contention. MARACAS also supports cache-aware scheduling and migration using page recoloring to improve performance isolation amongst VCPUs. Experiments show how MARACAS reduces multicore resource contention, leading to improved task progress.http://www.cs.bu.edu/fac/richwest/papers/rtss_2016.pdfAccepted manuscrip

Hardware counter based performance analysis, modelling, and improvement through thread migration in numa systems

[EN]These last years have seen an important evolution in the computational resources available in science and engineering. Currently, most high performance systems include several multicore processors and use a NUMA (Non Uniform Memory Access) memory architecture. In this context, data locality becomes a highly important issue for parallel codes performance. It is foreseeable that the complexity as SMP (Symmetric Multiprocessing) NUMA systems increases during the next years. These will increase both the number of cores and the memory complexity, including the various cache levels, which implies memory access latency will depend, increasingly, of the proximity or affinity of the different threads to the memory modules where their data reside. Improving the performance and scalability of parallel codes on multicore architectures may be quite complex. This way, memory management on parallel codes will become more complicated, especially from the point of view of a programmer who wishes to obtain the best performance. Not only this, but the problem worsens in the usual case with different processes in execution simultaneously. Automatically migrating executing threads among the cores and processors, depending on their behaviour, may improve performance of parallel programs. Furthermore, it may allow to simplify their development, since the programmer avoids to explicitly manage locality. Modern microprocessors include registers that give useful information at a low cost, usually known as hardware counters (HCs). HCs are not commonly used due to a lack of tools to easily obtain their data. These HCs, in modern processors, allow to obtain the memory access latency during cache miss resolutions, and even the memory address that leads to the event. This opens the door to the development of new techniques for performance improvement based on this information. A procedure to easily and automatically obtain data about a shared memory parallel code execution on SMP multicore and NUMA systems, to model it using the hardware counters of modern processors, alongside additional information, as the memory access latencies from different threads. This procedure will be used during a parallel program execution, at runtime, to model its performance. This information will be used to improve the efficiency of the execution of said parallel codes automatically and transparently to the user.[GL]Hoxe en día, a maioría dos sistemas de computación son multicore e mesmo multiprocessador. Nestes sistemas, o comportamento dos accesos á memoria de cada fío para os distintos nodos de memoria é un dos aspectos que máis significativamente afectan o rendemento de calquera código. Este feito é cada vez máis relevante a medida que aumenta o chamado "memory wall". Neste traballo, esta cuestión foi abordada baixo dous puntos de vista. Desde o punto de vista dun programador de aplicacións paralelas, desenvolvéronse ferramentas e modelos para caracterizar o comportamento de códigos e axudao para a súa aplicación. Desde o punto de vista dun usuario de aplicacións paralelas, desenvolveuse unha ferramenta de migración para seleccionar e adaptar, automaticamente durante a execución, a colocación de fíos no sistema para mellorar o seu funcionamento. Todas estas ferramentas fan uso de datos de rendemento en tempo de execución obtidos a partir de Contadores Hardware (HC) presentes nos procesadores Intel. En comparación cos "software profilers", os HC proporcionan, cunha baixa sobrecarga, unha información de rendemento detallada e rica referente ás unidades funcionais, caches, acceso á memoria principal por parte da CPU, etc. Outra vantaxe de usalos é que non precisa ningunha modificación do código fonte. Con todo, os tipos e os significados dos contadores hardware varían dunha arquitectura a outra debido á variación nas organizacións do hardware. Ademais, pode haber dificultades para correlacionar as métricas de rendemento de baixo nivel co código fonte orixinal. O número limitado de rexistros para almacenar os contadores moitas veces pode forzar aos usuarios a realizar múltiples medicións para recoller todas as métricas de rendemento desexadas. En concreto, neste traballo, utilizáronse os Precise Event Based Sampling (PEBS, MOSTRAXE BASEADO EN EVENTOS PRECISOS) nos procesadores Intel modernos e os Event Address Register (EARs, REXISTROS DE ENDEREZO DE EVENTO) nos procesadores Itanium 2. O procesador Itanium 2 ofrece un conxunto de rexistros, os EARs que rexistran os enderezos de instrución e datos dos fallos caché, e os enderezos de instrución e datos de fallos de TLB [25]. Cando se usan para capturar fallos caché, os EARs permiten a detección das latencias maiores de 4 ciclos. Xa que os accesos de punto flotante sempre provocan un fallo (os datos de punto flotante son sempre almacenados na L2D), calquer acceso pode ser potencialmente detectado. Os EARs permiten a mostraxe estatística, configurando un contador de rendemento para contar as aparicións dun determinado evento. O PEBS usa un mecanismo de interrupción cos HC para almacenar un conxunto de información sobre o estado da arquitectura para o procesador. A información ofrece o estado arquitectónico da instrución executada despois da instrución que causou o evento. Xunto con esta información, que inclúe o estado de todos os rexistros, os procesadores Sandy Bridge posúen un sistema de medición da latencia a memoria. Ista é un medio para caracterizar a latencia de carga media para os diferentes niveis da xerarquía de memoria. A latencia é medida dende a expedición da instrucción ata cando os datos son globalmente observables, e dicir, cando chegan ao procesador. Ademáis da latencia, o PEBS permite coñecer a orixe dos datos e o nivel de memoria de onde se leron. A diferenza dos EARs, o PEBS permite tamén medir a latencia de operacións enteiras ou de almacenamento de dato

Single system image: A survey

Single system image is a computing paradigm where a number of distributed computing resources are aggregated and presented via an interface that maintains the illusion of interaction with a single system. This approach encompasses decades of research using a broad variety of techniques at varying levels of abstraction, from custom hardware and distributed hypervisors to specialized operating system kernels and user-level tools. Existing classification schemes for SSI technologies are reviewed, and an updated classification scheme is proposed. A survey of implementation techniques is provided along with relevant examples. Notable deployments are examined and insights gained from hands-on experience are summarized. Issues affecting the adoption of kernel-level SSI are identified and discussed in the context of technology adoption literature

Real-time operating system support for multicore applications

Tese (doutorado) - Universidade Federal de Santa Catarina, Centro Tecnológico, Programa de Pós-Graduação em Engenharia de Automação e Sistemas, Florianópolis, 2014Plataformas multiprocessadas atuais possuem diversos níveis da memória cache entre o processador e a memória principal para esconder a latência da hierarquia de memória. O principal objetivo da hierarquia de memória é melhorar o tempo médio de execução, ao custo da previsibilidade. O uso não controlado da hierarquia da cache pelas tarefas de tempo real impacta a estimativa dos seus piores tempos de execução, especialmente quando as tarefas de tempo real acessam os níveis da cache compartilhados. Tal acesso causa uma disputa pelas linhas da cache compartilhadas e aumenta o tempo de execução das aplicações. Além disso, essa disputa na cache compartilhada pode causar a perda de prazos, o que é intolerável em sistemas de tempo real críticos. O particionamento da memória cache compartilhada é uma técnica bastante utilizada em sistemas de tempo real multiprocessados para isolar as tarefas e melhorar a previsibilidade do sistema. Atualmente, os estudos que avaliam o particionamento da memória cache em multiprocessadores carecem de dois pontos fundamentais. Primeiro, o mecanismo de particionamento da cache é tipicamente implementado em um ambiente simulado ou em um sistema operacional de propósito geral. Consequentemente, o impacto das atividades realizados pelo núcleo do sistema operacional, tais como o tratamento de interrupções e troca de contexto, no particionamento das tarefas tende a ser negligenciado. Segundo, a avaliação é restrita a um escalonador global ou particionado, e assim não comparando o desempenho do particionamento da cache em diferentes estratégias de escalonamento. Ademais, trabalhos recentes confirmaram que aspectos da implementação do SO, tal como a estrutura de dados usada no escalonamento e os mecanismos de tratamento de interrupções, impactam a escalonabilidade das tarefas de tempo real tanto quanto os aspectos teóricos. Entretanto, tais estudos também usaram sistemas operacionais de propósito geral com extensões de tempo real, que afetamos sobre custos de tempo de execução observados e a escalonabilidade das tarefas de tempo real. Adicionalmente, os algoritmos de escalonamento tempo real para multiprocessadores atuais não consideram cenários onde tarefas de tempo real acessam as mesmas linhas da cache, o que dificulta a estimativa do pior tempo de execução. Esta pesquisa aborda os problemas supracitados com as estratégias de particionamento da cache e com os algoritmos de escalonamento tempo real multiprocessados da seguinte forma. Primeiro, uma infraestrutura de tempo real para multiprocessadores é projetada e implementada em um sistema operacional embarcado. A infraestrutura consiste em diversos algoritmos de escalonamento tempo real, tais como o EDF global e particionado, e um mecanismo de particionamento da cache usando a técnica de coloração de páginas. Segundo, é apresentada uma comparação em termos da taxa de escalonabilidade considerando o sobre custo de tempo de execução da infraestrutura criada e de um sistema operacional de propósito geral com extensões de tempo real. Em alguns casos, o EDF global considerando o sobre custo do sistema operacional embarcado possui uma melhor taxa de escalonabilidade do que o EDF particionado com o sobre custo do sistema operacional de propósito geral, mostrando claramente como diferentes sistemas operacionais influenciam os escalonadores de tempo real críticos em multiprocessadores. Terceiro, é realizada uma avaliação do impacto do particionamento da memória cache em diversos escalonadores de tempo real multiprocessados. Os resultados desta avaliação indicam que um sistema operacional "leve" não compromete as garantias de tempo real e que o particionamento da cache tem diferentes comportamentos dependendo do escalonador e do tamanho do conjunto de trabalho das tarefas. Quarto, é proposto um algoritmo de particionamento de tarefas que atribui as tarefas que compartilham partições ao mesmo processador. Os resultados mostram que essa técnica de particionamento de tarefas reduz a disputa pelas linhas da cache compartilhadas e provê garantias de tempo real para sistemas críticos. Finalmente, é proposto um escalonador de tempo real de duas fases para multiprocessadores. O escalonador usa informações coletadas durante o tempo de execução das tarefas através dos contadores de desempenho em hardware. Com base nos valores dos contadores, o escalonador detecta quando tarefas de melhor esforço o interferem com tarefas de tempo real na cache. Assim é possível impedir que tarefas de melhor esforço acessem as mesmas linhas da cache que tarefas de tempo real. O resultado desta estratégia de escalonamento é o atendimento dos prazos críticos e não críticos das tarefas de tempo real.Abstracts: Modern multicore platforms feature multiple levels of cache memory placed between the processor and main memory to hide the latency of ordinary memory systems. The primary goal of this cache hierarchy is to improve average execution time (at the cost of predictability). The uncontrolled use of the cache hierarchy by realtime tasks may impact the estimation of their worst-case execution times (WCET), specially when real-time tasks access a shared cache level, causing a contention for shared cache lines and increasing the application execution time. This contention in the shared cache may leadto deadline losses, which is intolerable particularly for hard real-time (HRT) systems. Shared cache partitioning is a well-known technique used in multicore real-time systems to isolate task workloads and to improve system predictability. Presently, the state-of-the-art studies that evaluate shared cache partitioning on multicore processors lack two key issues. First, the cache partitioning mechanism is typically implemented either in a simulated environment or in a general-purpose OS (GPOS), and so the impact of kernel activities, such as interrupt handlers and context switching, on the task partitions tend to be overlooked. Second, the evaluation is typically restricted to either a global or partitioned scheduler, thereby by falling to compare the performance of cache partitioning when tasks are scheduled by different schedulers. Furthermore, recent works have confirmed that OS implementation aspects, such as the choice of scheduling data structures and interrupt handling mechanisms, impact real-time schedulability as much as scheduling theoretic aspects. However, these studies also used real-time patches applied into GPOSes, which affects the run-time overhead observed in these works and consequently the schedulability of real-time tasks. Additionally, current multicore scheduling algorithms do not consider scenarios where real-time tasks access the same cache lines due to true or false sharing, which also impacts the WCET. This thesis addresses these aforementioned problems with cache partitioning techniques and multicore real-time scheduling algorithms as following. First, a real-time multicore support is designed and implemented on top of an embedded operating system designed from scratch. This support consists of several multicore real-time scheduling algorithms, such as global and partitioned EDF, and a cache partitioning mechanism based on page coloring. Second, it is presented a comparison in terms of schedulability ratio considering the run-time overhead of the implemented RTOS and a GPOS patched with real-time extensions. In some cases, Global-EDF considering the overhead of the RTOS is superior to Partitioned-EDF considering the overhead of the patched GPOS, which clearly shows how different OSs impact hard realtime schedulers. Third, an evaluation of the cache partitioning impacton partitioned, clustered, and global real-time schedulers is performed.The results indicate that a lightweight RTOS does not impact real-time tasks, and shared cache partitioning has different behavior depending on the scheduler and the task's working set size. Fourth, a task partitioning algorithm that assigns tasks to cores respecting their usage of cache partitions is proposed. The results show that by simply assigning tasks that shared cache partitions to the same processor, it is possible to reduce the contention for shared cache lines and to provideHRT guarantees. Finally, a two-phase multicore scheduler that provides HRT and soft real-time (SRT) guarantees is proposed. It is shown that by using information from hardware performance counters at run-time, the RTOS can detect when best-effort tasks interfere with real-time tasks in the shared cache. Then, the RTOS can prevent best effort tasks from interfering with real-time tasks. The results also show that the assignment of exclusive partitions to HRT tasks together with the two-phase multicore scheduler provides HRT and SRT guarantees, even when best-effort tasks share partitions with real-time tasks

RELEASE: A High-level Paradigm for Reliable Large-scale Server Software

Erlang is a functional language with a much-emulated model for building reliable distributed systems. This paper outlines the RELEASE project, and describes the progress in the rst six months. The project aim is to scale the Erlang's radical concurrency-oriented programming paradigm to build reliable general-purpose software, such as server-based systems, on massively parallel machines. Currently Erlang has inherently scalable computation and reliability models, but in practice scalability is constrained by aspects of the language and virtual machine. We are working at three levels to address these challenges: evolving the Erlang virtual machine so that it can work effectively on large scale multicore systems; evolving the language to Scalable Distributed (SD) Erlang; developing a scalable Erlang infrastructure to integrate multiple, heterogeneous clusters. We are also developing state of the art tools that allow programmers to understand the behaviour of massively parallel SD Erlang programs. We will demonstrate the e ectiveness of the RELEASE approach using demonstrators and two large case studies on a Blue Gene

CROSS-LAYER CUSTOMIZATION FOR LOW POWER AND HIGH PERFORMANCE EMBEDDED MULTI-CORE PROCESSORS

Due to physical limitations and design difficulties, computer processor architecture has shifted to multi-core and even many-core based approaches in recent years. Such architectures provide potentials for sustainable performance scaling into future peta-scale/exa-scale computing platforms, at affordable power budget, design complexity, and verification efforts. To date, multi-core processor products have been replacing uni-core processors in almost every market segment, including embedded systems, general-purpose desktops and laptops, and super computers. However, many issues still remain with multi-core processor architectures that need to be addressed before their potentials could be fully realized. People in both academia and industry research community are still seeking proper ways to make efficient and effective use of these processors. The issues involve hardware architecture trade-offs, the system software service, the run-time management, and user application design, which demand more research effort into this field. Due to the architectural specialties with multi-core based computers, a Cross-Layer Customization framework is proposed in this work, which combines application specific information and system platform features, along with necessary operating system service support, to achieve exceptional power and performance efficiency for targeted multi-core platforms. Several topics are covered with specific optimization goals, including snoop cache coherence protocol, inter-core communication for producer-consumer applications, synchronization mechanisms, and off-chip memory bandwidth limitations. Analysis of benchmark program execution with conventional mechanisms is made to reveal the overheads in terms of power and performance. Specific customizations are proposed to eliminate such overheads with support from hardware, system software, compiler, and user applications. Experiments show significant improvement on system performance and power efficiency

Doctor of Philosophy

dissertationWith the explosion of chip transistor counts, the semiconductor industry has struggled with ways to continue scaling computing performance in line with historical trends. In recent years, the de facto solution to utilize excess transistors has been to increase the size of the on-chip data cache, allowing fast access to an increased portion of main memory. These large caches allowed the continued scaling of single thread performance, which had not yet reached the limit of instruction level parallelism (ILP). As we approach the potential limits of parallelism within a single threaded application, new approaches such as chip multiprocessors (CMP) have become popular for scaling performance utilizing thread level parallelism (TLP). This dissertation identifies the operating system as a ubiquitous area where single threaded performance and multithreaded performance have often been ignored by computer architects. We propose that novel hardware and OS co-design has the potential to significantly improve current chip multiprocessor designs, enabling increased performance and improved power efficiency. We show that the operating system contributes a nontrivial overhead to even the most computationally intense workloads and that this OS contribution grows to a significant fraction of total instructions when executing several common applications found in the datacenter. We demonstrate that architectural improvements have had little to no effect on the performance of the OS over the last 15 years, leaving ample room for improvements. We specifically consider three potential solutions to improve OS execution on modern processors. First, we consider the potential of a separate operating system processor (OSP) operating concurrently with general purpose processors (GPP) in a chip multiprocessor organization, with several specialized structures acting as efficient conduits between these processors. Second, we consider the potential of segregating existing caching structures to decrease cache interference between the OS and application. Third, we propose that there are components within the OS itself that should be refactored to be both multithreaded and cache topology aware, which in turn, improves the performance and scalability of many-threaded applications

Heracles: A Tool for Fast RTL-Based Design Space Exploration of Multicore Processors

This paper presents Heracles, an open-source, functional, parameterized, synthesizable multicore system toolkit. Such a multi/many-core design platform is a powerful and versatile research and teaching tool for architectural exploration and hardware-software co-design. The Heracles toolkit comprises the soft hardware (HDL) modules, application compiler, and graphical user interface. It is designed with a high degree of modularity to support fast exploration of future multicore processors of di erent topologies, routing schemes, processing elements (cores), and memory system organizations. It is a component-based framework with parameterized interfaces and strong emphasis on module reusability. The compiler toolchain is used to map C or C++ based applications onto the processing units. The GUI allows the user to quickly con gure and launch a system instance for easy factorial development and evaluation. Hardware modules are implemented in synthesizable Verilog and are FPGA platform independent. The Heracles tool is freely available under the open-source MIT license at: http://projects.csail.mit.edu/heracle