Hardware Trojan Detection Using Controlled Circuit Aging

This paper reports a novel approach that uses transistor aging in an integrated circuit (IC) to detect hardware Trojans. When a transistor is aged, it results in delays along several paths of the IC. This increase in delay results in timing violations that reveal as timing errors at the output of the IC during its operation. We present experiments using aging-aware standard cell libraries to illustrate the usefulness of the technique in detecting hardware Trojans. Combining IC aging with over-clocking produces a pattern of bit errors at the IC output by the induced timing violations. We use machine learning to learn the bit error distribution at the output of a clean IC. We differentiate the divergence in the pattern of bit errors because of a Trojan in the IC from this baseline distribution. We simulate the golden IC and show robustness to IC-to-IC manufacturing variations. The approach is effective and can detect a Trojan even if we place it far off the critical paths. Results on benchmarks from the Trust-hub show a detection accuracy of $\geq$99%.Comment: 21 pages, 34 figure

Ingress of threshold voltage-triggered hardware trojan in the modern FPGA fabric–detection methodology and mitigation

The ageing phenomenon of negative bias temperature instability (NBTI) continues to challenge the dynamic thermal management of modern FPGAs. Increased transistor density leads to thermal accumulation and propagates higher and non-uniform temperature variations across the FPGA. This aggravates the impact of NBTI on key PMOS transistor parameters such as threshold voltage and drain current. Where it ages the transistors, with a successive reduction in FPGA lifetime and reliability, it also challenges its security. The ingress of threshold voltage-triggered hardware Trojan, a stealthy and malicious electronic circuit, in the modern FPGA, is one such potential threat that could exploit NBTI and severely affect its performance. The development of an effective and efficient countermeasure against it is, therefore, highly critical. Accordingly, we present a comprehensive FPGA security scheme, comprising novel elements of hardware Trojan infection, detection, and mitigation, to protect FPGA applications against the hardware Trojan. Built around the threat model of a naval warship’s integrated self-protection system (ISPS), we propose a threshold voltage-triggered hardware Trojan that operates in a threshold voltage region of 0.45V to 0.998V, consuming ultra-low power (10.5nW), and remaining stealthy with an area overhead as low as 1.5% for a 28 nm technology node. The hardware Trojan detection sub-scheme provides a unique lightweight threshold voltage-aware sensor with a detection sensitivity of 0.251mV/nA. With fixed and dynamic ring oscillator-based sensor segments, the precise measurement of frequency and delay variations in response to shifts in the threshold voltage of a PMOS transistor is also proposed. Finally, the FPGA security scheme is reinforced with an online transistor dynamic scaling (OTDS) to mitigate the impact of hardware Trojan through run-time tolerant circuitry capable of identifying critical gates with worst-case drain current degradation

Techniques for Improving Security and Trustworthiness of Integrated Circuits

The integrated circuit (IC) development process is becoming increasingly vulnerable to malicious activities because untrusted parties could be involved in this IC development flow. There are four typical problems that impact the security and trustworthiness of ICs used in military, financial, transportation, or other critical systems: (i) Malicious inclusions and alterations, known as hardware Trojans, can be inserted into a design by modifying the design during GDSII development and fabrication. Hardware Trojans in ICs may cause malfunctions, lower the reliability of ICs, leak confidential information to adversaries or even destroy the system under specifically designed conditions. (ii) The number of circuit-related counterfeiting incidents reported by component manufacturers has increased significantly over the past few years with recycled ICs contributing the largest percentage of the total reported counterfeiting incidents. Since these recycled ICs have been used in the field before, the performance and reliability of such ICs has been degraded by aging effects and harsh recycling process. (iii) Reverse engineering (RE) is process of extracting a circuit’s gate-level netlist, and/or inferring its functionality. The RE causes threats to the design because attackers can steal and pirate a design (IP piracy), identify the device technology, or facilitate other hardware attacks. (iv) Traditional tools for uniquely identifying devices are vulnerable to non-invasive or invasive physical attacks. Securing the ID/key is of utmost importance since leakage of even a single device ID/key could be exploited by an adversary to hack other devices or produce pirated devices. In this work, we have developed a series of design and test methodologies to deal with these four challenging issues and thus enhance the security, trustworthiness and reliability of ICs. The techniques proposed in this thesis include: a path delay fingerprinting technique for detection of hardware Trojans, recycled ICs, and other types counterfeit ICs including remarked, overproduced, and cloned ICs with their unique identifiers; a Built-In Self-Authentication (BISA) technique to prevent hardware Trojan insertions by untrusted fabrication facilities; an efficient and secure split manufacturing via Obfuscated Built-In Self-Authentication (OBISA) technique to prevent reverse engineering by untrusted fabrication facilities; and a novel bit selection approach for obtaining the most reliable bits for SRAM-based physical unclonable function (PUF) across environmental conditions and silicon aging effects

Assessing Hardware Security Threats Posed by Hardware Trojans in Power Electronics

This study investigates the threat of hardware Trojans (HTs) in power electronics applications, a rising concern due to the growing demand for cost-effective embedded solutions in power systems. With the supply chain for electronic hardware devices expanding globally, particularly to low-cost foundries in foreign locations, there is an increasing risk of HT attacks. While there has been extensive research on HTs in computer applications, little consideration has been given to their threat in power electronics. This study demonstrates the effectiveness of a power electronics HT by implementing a novel HT design into a gate drive circuit. Additionally, the research proposes several HT designs that exploit factors unique to power circuits, such as high power delivery and analog circuitry in order to illustrate the distinct attack space. The research highlights the need for enhanced detection, protection, and prevention methods in power electronics applications and offers a roadmap for future studies to develop more effective countermeasures and algorithms to mitigate the risks of HT attacks in power electronics

Electromagnetic Transmission of Intellectual Property Data to Protect FPGA Designs

International audienceOver the past 10 years, the designers of intellectual properties(IP) have faced increasing threats including cloning, counterfeiting, andreverse-engineering. This is now a critical issue for the microelectronicsindustry. The design of a secure, efficient, lightweight protection scheme fordesign data is a serious challenge for the hardware security community. In thiscontext, this chapter presents two ultra-lightweight transmitters using sidechannel leakage based on electromagnetic emanation to send embedded IPidentity discreetly and quickl

DeMiST: Detection and Mitigation of Stealthy Analog Hardware Trojans

The global semiconductor supply chain involves design and fabrication at various locations, which leads to multiple security vulnerabilities, e.g., Hardware Trojan (HT) insertion. Although most HTs target digital circuits, HTs can be inserted in analog circuits. Therefore, several techniques have been developed for HT insertions in analog circuits. Capacitance-based Analog Hardware Trojan (AHT) is one of the stealthiest HT that can bypass most existing HT detection techniques because it uses negligible charge accumulation in the capacitor to generate stealthy triggers. To address the charge sharing and accumulation issues, we propose a novel way to detect such capacitance-based AHT in this paper. Secondly, we critically analyzed existing AHTs to highlight their respective limitations. We proposed a stealthier capacitor-based AHT (fortified AHT) that can bypass our novel AHT detection technique by addressing these limitations. Finally, by critically analyzing the proposed fortified AHT and existing AHTs, we developed a robust two-phase framework (DeMiST) in which a synchronous system can mitigate the effects of capacitance-based stealthy AHTs by turning off the triggering capability of AHT. In the first phase, we demonstrate how the synchronous system can avoid the AHT during run-time by controlling the supply voltage of the intermediate combinational circuits. In the second phase, we proposed a supply voltage duty cycle-based validation technique to detect capacitance-based AHTs. Furthermore, DeMiST amplified the switching activity for charge accumulation to such a degree that it can be easily detectable using existing switching activity-based HT detection techniques.Comment: Accepted at ACM Hardware and Architectural Support for Security and Privacy (HASP) 202

ENABLING IOT AUTHENTICATION, PRIVACY AND SECURITY VIA BLOCKCHAIN

Although low-power and Internet-connected gadgets and sensors are increasingly integrated into our lives, the optimal design of these systems remains an issue. In particular, authentication, privacy, security, and performance are critical success factors. Furthermore, with emerging research areas such as autonomous cars, advanced manufacturing, smart cities, and building, usage of the Internet of Things (IoT) devices is expected to skyrocket. A single compromised node can be turned into a malicious one that brings down whole systems or causes disasters in safety-critical applications. This dissertation addresses the critical problems of (i) device management, (ii) data management, and (iii) service management in IoT systems. In particular, we propose an integrated platform solution for IoT device authentication, data privacy, and service security via blockchain-based smart contracts. We ensure IoT device authentication by blockchain-based IC traceability system, from its fabrication to its end-of-life, allowing both the supplier and a potential customer to verify an IC’s provenance. Results show that our proposed consortium blockchain framework implementation in Hyperledger Fabric for IC traceability achieves a throughput of 35 transactions per second (tps). To corroborate the blockchain information, we authenticate the IC securely and uniquely with an embedded Physically Unclonable Function (PUF). For reliable Weak PUF-based authentication, our proposed accelerated aging technique reduces the cumulative burn-in cost by ∼ 56%. We also propose a blockchain-based solution to integrate the privacy of data generated from the IoT devices by giving users control of their privacy. The smart contract controlled trust-base ensures that the users have private access to their IoT devices and data. We then propose a remote configuration of IC features via smart contracts, where an IC can be programmed repeatedly and securely. This programmability will enable users to upgrade IC features or rent upgraded IC features for a fixed period after users have purchased the IC. We tailor the hardware to meet the blockchain performance. Our on-die hardware module design enforces the hardware configuration’s secure execution and uses only 2,844 slices in the Xilinx Zedboard Zynq Evaluation board. The blockchain framework facilitates decentralized IoT, where interacting devices are empowered to execute digital contracts autonomously

Design, Fabrication, and Run-time Strategies for Hardware-Assisted Security

Today, electronic computing devices are critically involved in our daily lives, basic infrastructure, and national defense systems. With the growing number of threats against them, hardware-based security features offer the best chance for building secure and trustworthy cyber systems. In this dissertation, we investigate ways of making hardware-based security into a reality with primary focus on two areas: Hardware Trojan Detection and Physically Unclonable Functions (PUFs). Hardware Trojans are malicious modifications made to original IC designs or layouts that can jeopardize the integrity of hardware and software platforms. Since most modern systems critically depend on ICs, detection of hardware Trojans has garnered significant interest in academia, industry, as well as governmental agencies. The majority of existing detection schemes focus on test-time because of the limited hardware resources available at run-time. In this dissertation, we explore innovative run-time solutions that utilize on-chip thermal sensor measurements and fundamental estimation/detection theory to expose changes in IC power/thermal profile caused by Trojan activation. The proposed solutions are low overhead and also generalizable to many other sensing modalities and problem instances. Simulation results using state-of-the-art tools on publicly available Trojan benchmarks verify that our approaches can detect Trojans quickly and with few false positives. Physically Unclonable Functions (PUFs) are circuits that rely on IC fabrication variations to generate unique signatures for various security applications such as IC authentication, anti-counterfeiting, cryptographic key generation, and tamper resistance. While the existence of variations has been well exploited in PUF design, knowledge of exactly how variations come into existence has largely been ignored. Yet, for several decades the Design-for-Manufacturability (DFM) community has actually investigated the fundamental sources of these variations. Furthermore, since manufacturing variations are often harmful to IC yield, the existing DFM tools have been geared towards suppressing them (counter-intuitive for PUFs). In this dissertation, we make several improvements over current state-of-the-art work in PUFs. First, our approaches exploit existing DFM models to improve PUFs at physical layout and mask generation levels. Second, our proposed algorithms reverse the role of standard DFM tools and extend them towards improving PUF quality without harming non-PUF portions of the IC. Finally, since our approaches occur after design and before fabrication, they are applicable to all types of PUFs and have little overhead in terms of area, power, etc. The innovative and unconventional techniques presented in this dissertation should act as important building blocks for future work in cyber security