I-Min: An Intelligent Fermat Point Based Energy Efficient Geographic Packet Forwarding Technique for Wireless Sensor and Ad Hoc Networks

Energy consumption and delay incurred in packet delivery are the two important metrics for measuring the performance of geographic routing protocols for Wireless Adhoc and Sensor Networks (WASN). A protocol capable of ensuring both lesser energy consumption and experiencing lesser delay in packet delivery is thus suitable for networks which are delay sensitive and energy hungry at the same time. Thus a smart packet forwarding technique addressing both the issues is thus the one looked for by any geographic routing protocol. In the present paper we have proposed a Fermat point based forwarding technique which reduces the delay experienced during packet delivery as well as the energy consumed for transmission and reception of data packets.Comment: 11 Page

Spatiotemporal Multicast and Partitionable Group Membership Service

The recent advent of wireless mobile ad hoc networks and sensor networks creates many opportunities and challenges. This thesis explores some of them. In light of new application requirements in such environments, it proposes a new multicast paradigm called spatiotemporal multicast for supporting ad hoc network applications which require both spatial and temporal coordination. With a focus on a special case of spatiotemporal multicast, called mobicast, this work proposes several novel protocols and analyzes their performances. This dissertation also investigates implications of mobility on the classical group membership problem in distributed computing, proposes a new specification for a partitionable group membership service catering to applications on wireless mobile ad hoc networks, and provides a mobility-aware algorithm and middleware for this service. The results of this work bring new insights into the design and analysis of spatiotemporal communication protocols and fault-tolerant computing in wireless mobile ad hoc networks

Self-organizing Network Optimization via Placement of Additional Nodes

Das Hauptforschungsgebiet des Graduiertenkollegs "International Graduate School on Mobile Communication" (GS Mobicom) der Technischen Universität Ilmenau ist die Kommunikation in Katastrophenszenarien. Wegen eines Desasters oder einer Katastrophe können die terrestrischen Elementen der Infrastruktur eines Kommunikationsnetzwerks beschädigt oder komplett zerstört werden. Dennoch spielen verfügbare Kommunikationsnetze eine sehr wichtige Rolle während der Rettungsmaßnahmen, besonders für die Koordinierung der Rettungstruppen und für die Kommunikation zwischen ihren Mitgliedern. Ein solcher Service kann durch ein mobiles Ad-Hoc-Netzwerk (MANET) zur Verfügung gestellt werden. Ein typisches Problem der MANETs ist Netzwerkpartitionierung, welche zur Isolation von verschiedenen Knotengruppen führt. Eine mögliche Lösung dieses Problems ist die Positionierung von zusätzlichen Knoten, welche die Verbindung zwischen den isolierten Partitionen wiederherstellen können. Hauptziele dieser Arbeit sind die Recherche und die Entwicklung von Algorithmen und Methoden zur Positionierung der zusätzlichen Knoten. Der Fokus der Recherche liegt auf Untersuchung der verteilten Algorithmen zur Bestimmung der Positionen für die zusätzlichen Knoten. Die verteilten Algorithmen benutzen nur die Information, welche in einer lokalen Umgebung eines Knotens verfügbar ist, und dadurch entsteht ein selbstorganisierendes System. Jedoch wird das gesamte Netzwerk hier vor allem innerhalb eines ganz speziellen Szenarios - Katastrophenszenario - betrachtet. In einer solchen Situation kann die Information über die Topologie des zu reparierenden Netzwerks im Voraus erfasst werden und soll, natürlich, für die Wiederherstellung mitbenutzt werden. Dank der eventuell verfügbaren zusätzlichen Information können die Positionen für die zusätzlichen Knoten genauer ermittelt werden. Die Arbeit umfasst eine Beschreibung, Implementierungsdetails und eine Evaluierung eines selbstorganisierendes Systems, welche die Netzwerkwiederherstellung in beiden Szenarien ermöglicht.The main research area of the International Graduate School on Mobile Communication (GS Mobicom) at Ilmenau University of Technology is communication in disaster scenarios. Due to a disaster or an accident, the network infrastructure can be damaged or even completely destroyed. However, available communication networks play a vital role during the rescue activities especially for the coordination of the rescue teams and for the communication between their members. Such a communication service can be provided by a Mobile Ad-Hoc Network (MANET). One of the typical problems of a MANET is network partitioning, when separate groups of nodes become isolated from each other. One possible solution for this problem is the placement of additional nodes in order to reconstruct the communication links between isolated network partitions. The primary goal of this work is the research and development of algorithms and methods for the placement of additional nodes. The focus of this research lies on the investigation of distributed algorithms for the placement of additional nodes, which use only the information from the nodes’ local environment and thus form a self-organizing system. However, during the usage specifics of the system in a disaster scenario, global information about the topology of the network to be recovered can be known or collected in advance. In this case, it is of course reasonable to use this information in order to calculate the placement positions more precisely. The work provides the description, the implementation details and the evaluation of a self-organizing system which is able to recover from network partitioning in both situations

Towards reliable geographic broadcasting in vehicular networks

In Vehicular ad hoc Networks (VANETs), safety-related messages are broadcasted amongst cars, helping to improve drivers' awareness of the road situation. VANETs’ reliability are highly affected by channel contention. This thesis first addresses the issue of channel use efficiency in geographical broadcasts (geocasts). Constant connectivity changes inside a VANET make the existing routing algorithms unsuitable. This thesis presents a geocast algorithm that uses a metric to estimate the ratio of useful to useless packet received. Simulations showed that this algorithm is more channel-efficient than the farthest-first strategy. It also exposes a parameter, allowing it to adapt to channel load. Second, this thesis presents a method of estimating channel load for providing feedback to moderate the offered load. A theoretical model showing the relationship between channel load and the idle time between transmissions is presented and used to estimate channel contention. Unsaturated stations on the network were shown to have small but observable effects on this relationship. In simulations, channel estimators based on this model show higher accuracy and faster convergence time than by observing packet collisions. These estimators are also less affected by unsaturated stations than by observing packet collisions. Third, this thesis couples the channel estimator to the geocast algorithm, producing a closed-loop load-reactive system that allows geocasts to adapt to instantaneous channel conditions. Simulations showed that this system is not only shown to be more efficient in channel use and be able to adapt to channel contention, but is also able to self-correct suboptimal retransmission decisions. Finally, this thesis demonstrates that all tested network simulators exhibit unexpected behaviours when simulating broadcasts. This thesis describes in depth the error in ns-3, leading to a set of workarounds that allows results from most versions of ns-3 to be interpreted correctly

LVMM: The Localized Vehicular Multicast Middleware - a Framework for Ad Hoc Inter-Vehicles Multicast Communications

This thesis defines a novel semantic for multicast in vehicular ad hoc networks (VANETs) and it defines a middleware, the Localized Vehicular Multicast Middleware (LVMM) that enables minimum cost, source-based multicast communications in VANETs. The middleware provides support to find vehicles suitable to sustain multicast communications, to maintain multicast groups, and to execute a multicast routing protocol, the Vehicular Multicast Routing Protocol (VMRP), that delivers messages of multicast applications to all the recipients utilizing a loop-free, minimum cost path from each source to all the recipients. LVMM does not require a vehicle to know all other members: only knowledge of directly reachable nodes is required to perform the source-based routing

SURVEY STUDY FOR VEHICULAR AD HOC NETWORKS PERFORMANCE IN CITY AND URBAN RESIDENTIAL AREAS

This thesis it survey study for VANET (Vehicular Ad-Hoc Networks) and it performance in city and urban residential areas, when the the number of vehicles on roads is increasing annually, due to the higher amount of traffic, there are more accidents associated with road traffic complexity. VANET can be used to detect dangerous situations which are forwarded to the driver assistant system by monitoring the traffic status.fi=Opinnäytetyö kokotekstinä PDF-muodossa.|en=Thesis fulltext in PDF format.|sv=Lärdomsprov tillgängligt som fulltext i PDF-format

SIMULATION AND ANALYSIS OF VEHICULAR AD-HOC NETWORKS IN URBAN AND RURAL AREAS

According to the American National Highway Traffic Safety Administration, in 2010, there were an estimated 5,419,000 police-reported traffic crashes, in which 32,885 people were killed and 2,239,000 people were injured in the US alone. Vehicular Ad-Hoc Network (VANET) is an emerging technology which promises to decrease car accidents by providing several safety related services such as blind spot, forward collision and sudden braking ahead warnings. Unfortunately, research of VANET is hindered by the extremely high cost and complexity of field testing. Hence it becomes important to simulate VANET protocols and applications thoroughly before attempting to implement them. This thesis studies the feasibility of common mobility and wireless channel models in VANET simulation and provides a general overview of the currently available VANET simulators and their features. Six different simulation scenarios are performed to evaluate the performance of AODV, DSDV, DSR and OLSR Ad-Hoc routing protocols with UDP and TCP packets. Simulation results indicate that reactive protocols are more robust and suitable for the highly dynamic VANET networks. Furthermore, TCP is found to be more suitable for VANET safety applications due to the high delay and packet drop of UDP packets.fi=Opinnäytetyö kokotekstinä PDF-muodossa.|en=Thesis fulltext in PDF format.|sv=Lärdomsprov tillgängligt som fulltext i PDF-format

Study of Obstacle effect on the GPSR protocol and a Novel Intelligent Greedy Routing protocol for VANETs

In recent years, connected vehicle technologies have been developed by automotive companies, academia, and researchers as part of Intelligent Transportation Systems (ITS). This group of stakeholders continue to work on these technologies to make them as reliable and cost-effective as possible. This attention is because of the increasing connected vehicles safety-related, entertainment, and traffic management applications, which have the potential to decrease the number of road accidents, save fuel and time for millions of daily commuters worldwide. Vehicular Ad-Hoc Network (VANET), which is a subgroup of Mobile Ad-Hoc Network (MANET), is being developed and implemented in vehicles as the critical structure for connected vehicles applications. VANET provides a promising concept to reduce the number of fatalities caused by road accidents, to improve traffic efficiency, and to provide infotainment. To support the increasing number of safety-related applications, VANETs are required to perform reliably. Since VANETs promise numerous safety applications requiring time-bound delivery of data packets, it is also necessary to replicate real-world scenarios in simulations as accurately as possible. Taking into account the effect of realistic obstacles while simulating a variety of case scenarios increases the reliability of the tested routing protocol to appropriately perform in real-world situations. It also exposes routing protocols to possible vulnerabilities caused by obstacles. Nevertheless, it is not uncommon for researchers to omit real-world physical layer communication hurdles in simulation-based tests, including not considering the effect of obstacles on their routing protocol performance evaluation simulations. Consequently, the performance of these protocols is usually overestimated and do not support in real-world environment. Failure to account for obstacle effects overstate the network performance. In this thesis, a framework for measuring obstacle effects on routing protocols is defined. We also propose, a new routing protocol based on the traditional Greedy Perimeter Stateless Routing (GPSR) protocol called Intelligent Greedy Routing (IGR) protocol. The proposed IGR protocol considers a parameter called $Receptivity$ to chose the next hop in a route. We implemented the new protocol using the Simulation of Urban Mobility (SUMO) and the Network Simulator (NS-3). An analysis of Packet Delivery Ratio (PDR), End-to-End Delay (E2ED) and Mean Hop count with the assumption that nodes (vehicles) are moving in various topologies is presented in this thesis. The study presented here gives a general idea of the effects of obstacles on the Greedy Perimeter Stateless Routing (GPSR) protocol considering multiple realistic scenarios such as Urban, Residential and Highway. In addition, we compare the performance of GPSR and the new IGR protocols with the presence of obstacles considering various topologies. The new proposed IGR protocol performs better compared to the traditional GPSR for all the investigated metrics

Analyzing the Impact of Wireless Multi-Hop Networking On Vehicular Safety

One of the core challenges of Intelligent Transportation System is the dissemination of timely and accurate vehicle information (e.g. speed, position) to geographically large distances without compromising data supply rates from immediate neighbors. This feature is critical for the design of vehicle safety and navigation applications. Single hop broadcasting is often inadequate to ensure vehicle safety when the platoon size is arbitrarily large due to its upper bound on rate and range of wireless message transmission. Existing wireless multi-hop protocols do not ensure reliable message delivery while avoiding network congestion in the shared channel. In this thesis, we make two separate but related investigations to address this challenge - (1) Analyze the impact of distance sensitive multi-hop broadcasting in realistic traffic network (2) Analyze the impact of wireless multi-hop network in vehicle safety. For investigating the first part, we used VCAST, a distance sensitive information propagation technique, in which information is forwarded at a rate that decreases linearly with distance from the source. VCAST is evaluated by using extensive simulations in ns-3, a discrete event simulator for wireless and mobile ad-hoc networks, under different density, source broadcast rates and communication range. To simulate realistic traffic movement, we used 2d grids of different sizes and used both uniform and non-uniform mobility. The results show that VCAST is scalable for - large number of vehicles and large source broadcast rates. It is further shown that successful scaling is achieved by reduced number of vehicle records transmitted per second per vehicle for varying network sizes and varying source broadcast rates. Vehicle safety messages for VCAST are piggy backed on heart beat messages and does not require any modifications to the existing vehicular communication standards. For investigating the second part, we implemented a realistic car following model and used string stability analysis as a metric for measuring vehicle safety. The basic idea is to exploit the small network propagation time in disseminating safety messages over large distances, instead of relying on just the predecessor vehicle\u27s state. This enables distant vehicles in a traffic stream to plan well in advance against rear end collisions which could lead to string instability. We also proposed one such proactive method of planning - and that is by controlling the headway time. Through extensive simulations, we obtained results for vehicle safety when some incident is detected abruptly on its course. The results show that proactive planning using multi-hop network makes the entire platoon string stable in the presence of emergency road incidents