Multipath Routing in Wireless Sensor Networks: Survey and Research Challenges

A wireless sensor network is a large collection of sensor nodes with limited power supply and constrained computational capability. Due to the restricted communication range and high density of sensor nodes, packet forwarding in sensor networks is usually performed through multi-hop data transmission. Therefore, routing in wireless sensor networks has been considered an important field of research over the past decade. Nowadays, multipath routing approach is widely used in wireless sensor networks to improve network performance through efficient utilization of available network resources. Accordingly, the main aim of this survey is to present the concept of the multipath routing approach and its fundamental challenges, as well as the basic motivations for utilizing this technique in wireless sensor networks. In addition, we present a comprehensive taxonomy on the existing multipath routing protocols, which are especially designed for wireless sensor networks. We highlight the primary motivation behind the development of each protocol category and explain the operation of different protocols in detail, with emphasis on their advantages and disadvantages. Furthermore, this paper compares and summarizes the state-of-the-art multipath routing techniques from the network application point of view. Finally, we identify open issues for further research in the development of multipath routing protocols for wireless sensor networks

Reducing Congestion Effects by Multipath Routing in Wireless Networks

We propose a solution to improve fairness and increasethroughput in wireless networks with location information.Our approach consists of a multipath routing protocol, BiasedGeographical Routing (BGR), and two congestion controlalgorithms, In-Network Packet Scatter (IPS) and End-to-EndPacket Scatter (EPS), which leverage BGR to avoid the congestedareas of the network. BGR achieves good performancewhile incurring a communication overhead of just 1 byte perdata packet, and has a computational complexity similar togreedy geographic routing. IPS alleviates transient congestion bysplitting traffic immediately before the congested areas. In contrast,EPS alleviates long term congestion by splitting the flow atthe source, and performing rate control. EPS selects the pathsdynamically, and uses a less aggressive congestion controlmechanism on non-greedy paths to improve energy efficiency.Simulation and experimental results show that our solutionachieves its objectives. Extensive ns-2 simulations show that oursolution improves both fairness and throughput as compared tosingle path greedy routing. Our solution reduces the variance ofthroughput across all flows by 35%, reduction which is mainlyachieved by increasing throughput of long-range flows witharound 70%. Furthermore, overall network throughput increasesby approximately 10%. Experimental results on a 50-node testbed are consistent with our simulation results, suggestingthat BGR is effective in practice

Energy Aware Multipath Routing in Wireless Sensor Networks

Wireless Sensor Networks(WSNs) are made of sensor nodes with restricted battery life and transmission capability. In this work we propose an energy efficient multipath routing algorithm in WSN. This protocol is designed to improve the latency, resiliency and efficiency through discovering multiple paths from the source to the destination. It has a sink initiated Route Discovery process with the location information of the source known to the sink. There are two types of nodes which are used here one is primary and the other is alternate. At the end of the route formation one primary path and multiple number of alternate paths are built,and, all nodes except the primary are put to sleep mode which helps us to save energy and generate a collision free path, the primary path is used to transmit the data from source to the sink and if the route disrupts, the next best alternate route is used for the purpose and if no path exists between the source and destination then process starts from the beginning. Our simulation finds the latency, packet delivery ratio, average control packet overhead and total energy consumed. The proposed protocol has 12% (approx.) less control packet overhead in comparison to MR2 and LIEMRO,5% less average energy consumption in comparison to MR2 and 28% less average energy consumption in comparison to LIEMRO. Regarding latency the proposed protocol has similar result to MR2 but in comparison to LIEMRO the algorithm is 24% faster. Lastly in case of Packet Delivery Ratio the proposed protocol gives 5% better result in comparison to MR2 and, 12% better result in comparison to LIEMRO on an average

Interference-Aware Routing in Wireless Mesh Networks

User demand for seamless connectivity has encouraged the development of alternatives to traditional communications infrastructure networks. Potential solutions have to be low-cost, easily deployable and adaptive to the environment. One approach that has gained tremendous attention over the past few years is the deployment of a backbone of access points wirelessly interconnected, allowing users to access the wired infrastructure via wireless multi-hop communication. Wireless Mesh Networks (WMN) fall into this category and constitute a technology that could revolutionize the way wireless network access is provided. However, limited transfer capacity and interference resulting from the shared nature of the transmission medium will prevent widespread deployment if the network performance does not meet users' expectations. It is therefore imperative to provide efficient mechanisms for such networks. Resource management encompasses a number of different issues, including routing. Although a profusion of routing mechanisms have been proposed for other wireless technologies, the unique characteristics of WMNs (i.e. fixed wireless backbone, with the possibility to embed multiple interfaces) prevent their straight forward adoption in WMNs. Moreover, the severe performance degradations that can result from the interference generated by concurrent data transmissions and environmental noise call for the development of interference-aware routing mechanisms. In this thesis, we investigated the impact of interference on the network performance of wireless mesh networks. We designed algorithms to associate routers to gateways that minimize the interference level in single-channel and multi-channel networks. We then studied the performance of existing routing metrics and their suitability for mesh networks. As a result of this analysis, we designed a novel routing metric and showed its benefits over existing ones. Finally, we provided an analytical evaluation of the probability of finding two non interfering paths given a network topology

A Review of Wireless Sensor Networks with Cognitive Radio Techniques and Applications

The advent of Wireless Sensor Networks (WSNs) has inspired various sciences and telecommunication with its applications, there is a growing demand for robust methodologies that can ensure extended lifetime. Sensor nodes are small equipment which may hold less electrical energy and preserve it until they reach the destination of the network. The main concern is supposed to carry out sensor routing process along with transferring information. Choosing the best route for transmission in a sensor node is necessary to reach the destination and conserve energy. Clustering in the network is considered to be an effective method for gathering of data and routing through the nodes in wireless sensor networks. The primary requirement is to extend network lifetime by minimizing the consumption of energy. Further integrating cognitive radio technique into sensor networks, that can make smart choices based on knowledge acquisition, reasoning, and information sharing may support the network's complete purposes amid the presence of several limitations and optimal targets. This examination focuses on routing and clustering using metaheuristic techniques and machine learning because these characteristics have a detrimental impact on cognitive radio wireless sensor node lifetime

Wireless multimedia sensor networks, security and key management

Wireless Multimedia Sensor Networks (WMSNs) have emerged and shifted the focus from the typical scalar wireless sensor networks to networks with multimedia devices that are capable to retrieve video, audio, images, as well as scalar sensor data. WMSNs are able to deliver multimedia content due to the availability of inexpensive CMOS cameras and microphones coupled with the significant progress in distributed signal processing and multimedia source coding techniques. These mentioned characteristics, challenges, and requirements of designing WMSNs open many research issues and future research directions to develop protocols, algorithms, architectures, devices, and testbeds to maximize the network lifetime while satisfying the quality of service requirements of the various applications. In this thesis dissertation, we outline the design challenges of WMSNs and we give a comprehensive discussion of the proposed architectures and protocols for the different layers of the communication protocol stack for WMSNs along with their open research issues. Also, we conduct a comparison among the existing WMSN hardware and testbeds based on their specifications and features along with complete classification based on their functionalities and capabilities. In addition, we introduce our complete classification for content security and contextual privacy in WSNs. Our focus in this field, after conducting a complete survey in WMSNs and event privacy in sensor networks, and earning the necessary knowledge of programming sensor motes such as Micaz and Stargate and running simulation using NS2, is to design suitable protocols meet the challenging requirements of WMSNs targeting especially the routing and MAC layers, secure the wirelessly exchange of data against external attacks using proper security algorithms: key management and secure routing, defend the network from internal attacks by using a light-weight intrusion detection technique, protect the contextual information from being leaked to unauthorized parties by adapting an event unobservability scheme, and evaluate the performance efficiency and energy consumption of employing the security algorithms over WMSNs

Routing protocol optimization in challenged multihop wireless networks

Durant ces dernières années, de nombreux travaux de recherches ont été menés dans le domaine des réseaux multi-sauts sans fil à contraintes (MWNs: Multihop Wireless Networks). Grâce à l'évolution de la technologie des systèmes mico-electro-méchaniques (MEMS) et, depuis peu, les nanotechnologies, les MWNs sont une solution de choix pour une variété de problèmes. Le principal avantage de ces réseaux est leur faible coût de production qui permet de développer des applications ayant un unique cycle de vie. Cependant, si le coût de fabrication des nœuds constituant ce type de réseaux est assez faible, ces nœuds sont aussi limités en capacité en termes de: rayon de transmission radio, bande passante, puissance de calcul, mémoire, énergie, etc. Ainsi, les applications qui visent l'utilisation des MWNs doivent être conçues avec une grande précaution, et plus spécialement la conception de la fonction de routage, vu que les communications radio constituent la tâche la plus consommatrice d'énergie.Le but de cette thèse est d'analyser les différents défis et contraintes qui régissent la conception d'applications utilisant les MWNs. Ces contraintes se répartissent tout le long de la pile protocolaire. On trouve au niveau application des contraintes comme: la qualité de service, la tolérance aux pannes, le modèle de livraison de données au niveau application, etc. Au niveau réseau, on peut citer les problèmes de la dynamicité de la topologie réseau, la présence de trous, la mobilité, etc. Nos contributions dans cette thèse sont centrées sur l'optimisation de la fonction de routage en considérant les besoins de l'application et les contraintes du réseau. Premièrement, nous avons proposé un protocole de routage multi-chemin "en ligne" pour les applications orientées QoS utilisant des réseaux de capteurs multimédia. Ce protocole repose sur la construction de multiples chemins durant la transmission des paquets vers leur destination, c'est-à-dire sans découverte et construction des routes préalables. En permettant des transmissions parallèles, ce protocole améliore la transmission de bout-en-bout en maximisant la bande passante du chemin agrégé et en minimisant les délais. Ainsi, il permet de répondre aux exigences des applications orientées QoS.Deuxièmement, nous avons traité le problème du routage dans les réseaux mobiles tolérants aux délais. Nous avons commencé par étudier la connectivité intermittente entre les différents et nous avons extrait un modèle pour les contacts dans le but pouvoir prédire les future contacts entre les nœuds. En se basant sur ce modèle, nous avons proposé un protocole de routage, qui met à profit la position géographique des nœuds, leurs trajectoires, et la prédiction des futurs contacts dans le but d'améliorer les décisions de routage. Le protocole proposé permet la réduction des délais de bout-en-bout tout en utilisant d'une manière efficace les ressources limitées des nœuds que ce soit en termes de mémoire (pour le stockage des messages dans les files d'attentes) ou la puissance de calcul (pour l'exécution de l'algorithme de prédiction).Finalement, nous avons proposé un mécanisme de contrôle de la topologie avec un algorithme de routage des paquets pour les applications orientés évènement et qui utilisent des réseaux de capteurs sans fil statiques. Le contrôle de la topologie est réalisé à travers l'utilisation d'un algorithme distribué pour l'ordonnancement du cycle de service (sleep/awake). Les paramètres de l'algorithme proposé peuvent être réglés et ajustés en fonction de la taille du voisinage actif désiré (le nombre moyen de voisin actifs pour chaque nœud). Le mécanisme proposé assure un compromis entre le délai pour la notification d'un événement et la consommation d'énergie globale dans le réseau.Great research efforts have been carried out in the field of challenged multihop wireless networks (MWNs). Thanks to the evolution of the Micro-Electro-Mechanical Systems (MEMS) technology and nanotechnologies, multihop wireless networks have been the solution of choice for a plethora of problems. The main advantage of these networks is their low manufacturing cost that permits one-time application lifecycle. However, if nodes are low-costly to produce, they are also less capable in terms of radio range, bandwidth, processing power, memory, energy, etc. Thus, applications need to be carefully designed and especially the routing task because radio communication is the most energy-consuming functionality and energy is the main issue for challenged multihop wireless networks.The aim of this thesis is to analyse the different challenges that govern the design of challenged multihop wireless networks such as applications challenges in terms of quality of service (QoS), fault-tolerance, data delivery model, etc., but also networking challenges in terms of dynamic network topology, topology voids, etc. Our contributions in this thesis focus on the optimization of routing under different application requirements and network constraints. First, we propose an online multipath routing protocol for QoS-based applications using wireless multimedia sensor networks. The proposed protocol relies on the construction of multiple paths while transmitting data packets to their destination, i.e. without prior topology discovery and path establishment. This protocol achieves parallel transmissions and enhances the end-to-end transmission by maximizing path bandwidth and minimizing the delays, and thus meets the requirements of QoS-based applications. Second, we tackle the problem of routing in mobile delay-tolerant networks by studying the intermittent connectivity of nodes and deriving a contact model in order to forecast future nodes' contacts. Based upon this contact model, we propose a routing protocol that makes use of nodes' locations, nodes' trajectories, and inter-node contact prediction in order to perform forwarding decisions. The proposed routing protocol achieves low end-to-end delays while using efficiently constrained nodes' resources in terms of memory (packet queue occupancy) and processing power (forecasting algorithm). Finally, we present a topology control mechanism along a packet forwarding algorithm for event-driven applications using stationary wireless sensor networks. Topology control is achieved by using a distributed duty-cycle scheduling algorithm. Algorithm parameters can be tuned according to the desired node's awake neighbourhood size. The proposed topology control mechanism ensures trade-off between event-reporting delay and energy consumption.BORDEAUX1-Bib.electronique (335229901) / SudocSudocFranceF

Exploiting the power of multiplicity: a holistic survey of network-layer multipath

The Internet is inherently a multipath network: For an underlying network with only a single path, connecting various nodes would have been debilitatingly fragile. Unfortunately, traditional Internet technologies have been designed around the restrictive assumption of a single working path between a source and a destination. The lack of native multipath support constrains network performance even as the underlying network is richly connected and has redundant multiple paths. Computer networks can exploit the power of multiplicity, through which a diverse collection of paths is resource pooled as a single resource, to unlock the inherent redundancy of the Internet. This opens up a new vista of opportunities, promising increased throughput (through concurrent usage of multiple paths) and increased reliability and fault tolerance (through the use of multiple paths in backup/redundant arrangements). There are many emerging trends in networking that signify that the Internet's future will be multipath, including the use of multipath technology in data center computing; the ready availability of multiple heterogeneous radio interfaces in wireless (such as Wi-Fi and cellular) in wireless devices; ubiquity of mobile devices that are multihomed with heterogeneous access networks; and the development and standardization of multipath transport protocols such as multipath TCP. The aim of this paper is to provide a comprehensive survey of the literature on network-layer multipath solutions. We will present a detailed investigation of two important design issues, namely, the control plane problem of how to compute and select the routes and the data plane problem of how to split the flow on the computed paths. The main contribution of this paper is a systematic articulation of the main design issues in network-layer multipath routing along with a broad-ranging survey of the vast literature on network-layer multipathing. We also highlight open issues and identify directions for future work