Fusion of Urban TanDEM-X raw DEMs using variational models

Recently, a new global Digital Elevation Model (DEM) with pixel spacing of 0.4 arcseconds and relative height accuracy finer than 2m for flat areas (slopes 20%) was created through the TanDEM-X mission. One important step of the chain of global DEM generation is to mosaic and fuse multiple raw DEM tiles to reach the target height accuracy. Currently, Weighted Averaging (WA) is applied as a fast and simple method for TanDEM-X raw DEM fusion in which the weights are computed from height error maps delivered from the Interferometric TanDEM-X Processor (ITP). However, evaluations show that WA is not the perfect DEM fusion method for urban areas especially in confrontation with edges such as building outlines. The main focus of this paper is to investigate more advanced variational approaches such as TV-L1 and Huber models. Furthermore, we also assess the performance of variational models for fusing raw DEMs produced from data takes with different baseline configurations and height of ambiguities. The results illustrate the high efficiency of variational models for TanDEM-X raw DEM fusion in comparison to WA. Using variational models could improve the DEM quality by up to 2m particularly in inner-city subsets.Comment: This is the pre-acceptance version, to read the final version, please go to IEEE Journal of Selected Topics in Applied Earth Observations and Remote Sensing on IEEE Xplor

Interferometric Synthetic Aperture RADAR and Radargrammetry towards the Categorization of Building Changes

The purpose of this work is the investigation of SAR techniques relying on multi image acquisition for fully automatic and rapid change detection analysis at building level. In particular, the benefits and limitations of a complementary use of two specific SAR techniques, InSAR and radargrammetry, in an emergency context are examined in term of quickness, globality and accuracy. The analysis is performed using spaceborne SAR data

INSAR Principles B

reserved5A. Ferretti; A. Monti Guarnieri; C. Prati; F. Rocca; D. MassonnetFerretti, Alessandro; MONTI-GUARNIERI, ANDREA VIRGILIO; Prati, CLAUDIO MARIA; Rocca, Fabio; D., Massonne

High-accuracy digital elevation model generation and ship monitoring from synthetic aperture radar images: innovative techniques and experimental results.

In this Thesis several state-of-the-art and innovative techniques for Digital Elevation Model (DEM) generation from Synthetic Aperture Radar (SAR) images are deeply analyzed, with a special focus on the methods which allow the improvement of the accuracy of the DEM product, which is directly related to the geolocation accuracy of geocoded images and is considered as an enabling factor for a large series of civilian and Defence applications. Furthermore, some of the proposed techniques, which are based both on phase and amplitude information, are experimented on real data, i.e. COSMO-SkyMed (CSK) data, assessing the achievable performances compared with the state-of-the-art, and pointing out and quantitatively highlighting the acquisition and processing strategies which would allow to maximize the quality of the results. Moreover, a critical analysis is performed about the main errors affecting the applied techniques, as well as the limitations of the orbital configurations, identifying several complementary techniques which would allow to overcome or mitigate the observed drawbacks. An innovative procedure for on-demand DEM production from CSK SAR data is elaborated and proposed, as well as an auto-validation technique which would enable the validation of the produced DEM also where vertical ground truths are not available. Based on the obtained results and on the consequent critical analysis, several interferometric specifications for new generation SAR satellites are identified. Finally, a literature review is proposed about the main state-of-the-art ship monitoring techniques, considered as one of the main fields of application which takes benefit from SAR data, based on single/multi-platform multi-channel SAR data, with a focus on TanDEM-X (TDX). In particular, in Chapter 1 the main concepts concerning SAR operating principles are introduced and the main characteristics and performances of CSK and TDX satellite systems are described; in Chapter 2 a review is proposed about the state-of-the-art SAR interferometric techniques for DEM generation, analyzing all the relevant processing steps and deepening the study of the main solutions recently proposed in the literature to increase the accuracy of the interferometric processing; in Chapter 3 complementary and innovative techniques respect to the interferometric processing are analyzed to mitigate disadvantages and to improve performances; in Chapter 4 experimental results are presented, obtained in the generation of high accuracy DEM by applying to a dataset of CSK images properly selected state-of-the-art interferometric techniques and innovative methods to improve DEM accuracy, exploring relevant limitations, and pointing out innovative acquisition and processing strategies. In Chapter 5, the basic principles of Ground Moving Target Indication (GMTI) are described, focusing on Displaced Phase Center Antenna (DPCA) and Along-Track Interferometry (ATI) techniques

Monitoring von Hangbewegungen mit InSAR Techniken im Gebiet Ciloto, Indonesien

In this doctoral thesis, the InSAR techniques are applied to detect the ground movement phenomenon and to assess the InSAR result geometrically in the Ciloto area, Indonesia. Mainly, one of those techniques, the SB-SDFP algorithm, overcomes the limitations of conventional InSAR in monitoring rural and agricultural areas and can observe extremely slow landslides. The InSAR strategy is positively known as a promising option to detect and quantify the kinematics of active landslides on a large areal scale. To minimize the bias of the InSAR displacement result, the correction of the tropospheric phase delay was carried out in a first step. This procedure is demonstrated in experiments both in the small study area in Ciloto and in a larger area. The latter is an area located in Northern Baja California, Mexico and is dominated by tectonic activity as well as groundwater-induced subsidence. A detailed investigation of the slope movement's behavior in the Ciloto district was conducted utilizing multi-temporal and multi-band SAR data from ERS1/2 (1996-1999), ALOS PALSAR (2007-2009) and Sentinel-1 (2014-2018) satellites. The region was successfully identified as a permanent active landslide prone area, especially in the vicinity of the Puncak Pass and Puncak Highway. The full 3D velocity field and the displacement time series were estimated using the inversion model. The velocity rate was classified from extremely slow to slow movement. To comprehend the landslide's behavior, a further examination of the relationship between InSAR results and physical characteristics of the area was carried out. For the long period of a slow-moving landslide, the relationship between precipitation and displacement trend shows a weak correlation. It is concluded that the extremely slow to slow deformation is not directly influenced by the rainfall intensity, yet it effectuates the subsurface and the groundwater flow. The run-off process with rainfall exceeding a soil's infiltration capacity was suspected as the main driver of the slow ground movement phenomenon. However, when analyzing rapid and extremely rapid landslide events at Puncak Pass, a significant increase in the correlation coefficient between precipitation and displacement rate could be observed.In dieser Doktorarbeit wird die Anwendung von erweiterten Verarbeitungsstrategien von InSAR Daten zur Erkennung und geometrischen Bewertung der Bodenbewegungen im Ciloto - Indonesien dargestellt. Dieser Ansatz überwindet die Beschränkungen konventioneller SAR-Interferometrie und ermöglicht sowohl ein kontinuierliches Monitoring dieses landwirtschaftich geprägten Gebietes als auch die Erfassung extrem langsamer Hangrutschungen. Um eine Verzerrung der InSAR Deformationsergebnisse zu minimieren, wurde zunächst eine Korrektur der troposphärischen Phase durchgeführt. Diese neuartige Strategie wird sowohl im Forschungsgebiet Ciloto als auch an einem größeren Gebiet demonstriert. Bei letzterem handelt es sich um einen Küstenstreifen im nördlichen Niederkalifornien, Mexiko, welcher durch hohe tektonische Aktivität und grundwasserinduzierte Landsetzungen charakterisiert ist. Die detaillierte Untersuchung des Verhaltens von Hangrutschungen im Ciloto erfolgte durch die Verarbeitung multi-temporaler SAR-Daten unter Nutzung verschiedener Frequenzbänder, darunter ESR1/2 (1996-1999), ALOS PALSAR (2007-2009) und Sentinel-1 (2014-2018) Daten. Die Region konnte erfolgreich als permanent aktives Hangrutschungsgebiet identifiziert werden, wobei der Puncak Pass und der Puncak Highway ein erhöhtes Gefahrenpotential aufweisen. Ein 3D- Geschwindig-keitsfeld der Deformation und die zugehörigen Zeitreihen wurden mit dem Inversionsmodell berechnet. Die Geschwindigkeitsrate wurde als langsam bis extrem langsam klassifiziert. Um das dynamische Verhalten der Hangrutschung zu verstehen wurde, in einer weiteren Untersuchung die Beziehung zwischen dem InSAR-Ergebnis und den physikalischen Begebenheiten im Forschungsgebiet analysiert. Es wird der Schluss gezogen, dass die langsame bis extrem langsame Verformung nicht direkt von der Niederschlagsintensität beeinflusst wird, diese sich aber auf den Untergrund und die Grundwasserströmung auswirkt. Es wird vermutet, dass der Oberflächenablauf, welcher die Infiltrationskapazität des Bodens übersteigt, ausschlaggebend für das Phänomen der langsamen Bodenbewegung ist. Für die schnellen und extrem schnellen Hangrutschungen jedoch konnte eine signifikante Erhöhung des Korrelationskoeffizienten zwischen Niederschlag und Verschiebungsrate bei Untersuchungen der Hangrutschung am Puncak-Pass nachgewiesen werden

Fusion of Interferometric SAR and Photogrammetric Elevation Data

Neurology & clinical neurophysiolog

Synergetic use of Sentinel-1 and Sentinel-2 for assessments of heathland conservation status

Habitat quality assessments often demand wall‐to‐wall information about the state of vegetation. Remote sensing can provide this information by capturing optical and structural attributes of plant communities. Although active and passive remote sensing approaches are considered as complementary techniques, they have been rarely combined for conservation mapping. Here, we combined spaceborne multispectral Sentinel‐2 and Sentinel‐1 SAR data for a remote sensing‐based habitat quality assessment of dwarf shrub heathland, which was inspired by nature conservation field guidelines. Therefore, three earlier proposed quality layers representing (1) the coverage of the key dwarf shrub species, (2) stand structural diversity and (3) an index reflecting co‐occurring vegetation were mapped via linking in situ data and remote sensing imagery. These layers were combined in an RGB‐representation depicting varying stand attributes, which afterwards allowed for a rule‐based derivation of pixel‐wise habitat quality classes. The links between field observations and remote sensing data reached correlations between 0.70 and 0.94 for modeling the single quality layers. The spatial patterns shown in the quality layers and the map of discrete quality classes were in line with the field observations. The remote sensing‐based mapping of heathland conservation status showed an overall agreement of 76% with field data. Transferring the approach in time (applying a second set of Sentinel‐1 and ‐2 data) caused a decrease in accuracy to 73%. Our findings suggest that Sentinel‐1 SAR contains information about vegetation structure that is complimentary to optical data and therefore relevant for nature conservation. While we think that rule‐based approaches for quality assessments offer the possibility for gaining acceptance in both communities applied conservation and remote sensing, there is still need for developing more robust and transferable methods

Extraction of spatial information from sterioscopic SAR images

Synthetic Aperture Radar (SAR) is now widely used for generating Digital Elevation Models (DEMs) and has advantages over optical data in terms of availability as it allows all-day and all-weather operations. The stereoscopic SAR method, which allows direct extraction of spatial information in three-dimensional space, has been established for decades. However, the traditional stereoscopic methods developed for SAR data depend on many human operations and need ground control points (GCPs), to set up geometric models. The aims of the thesis are not only to propose a refined rigorous stereoscopic SAR method and a new error model to predict theoretic errors, but also to achieve a higher level of automation and accuracy. By using a weighting matrix, which is derived by considering different observations in the space intersection algorithm, the minimal number of the GCPs required for the refined algorithm is only two. To achieve a high degree of automation, an optimized strategy of parameter selection for the pyramidal image correlation scheme employing a region-growing technique has been proposed. This avoids a trial-and-error approach to produce digital parallax data from the same-side SAR image pairs. A new method to derive GCPs automatically has been developed using a SAR image simulation technique, under the condition that a known DEM chip is available, to minimize human interventions and operator error. The proposed method for providing GCPs and the DEMs generated from space intersection have been incorporated into the procedures for geocoding SAR images to validate the proposed algorithms. The results derived show that the stereoscopic SAR data can be applied to geometric rectification in flat-to-moderate areas, and other applications of extraction of spatial information are promising