GPRS Function Test using TTCN

Functional and conformance testing of new standardized services and protocols is a challenging task as standards may change during implementation and the test system has to be adapted to the system under test continuously. This paper describes how modular and concurrent TTCN was deployed for validation of the GPRS support nodes and reports on the experience collected

Ensuring interoperability between network elements in next generation networks

Next Generation Networks (NGNs), based on the Internet Protocol (IP), implement several services such as IP-based telephony and are beginning to replace the classic telephony systems. Due to the development and implementation of new powerful services these systems are becoming increasingly complex. Implementing these new services (typically software-based network elements) is often accompanied by unexpected and erratic behaviours which can manifest as interoperability problems. The reason for this caused by insufficient testing at the developing companies. The testing of such products is by nature a costly and time-consuming exercise and therefore cut down to what is considered the maximum acceptable level. Ensuring the interoperability between network elements is a known challenge. However, there exists no concept of which testing methods should be utilised to achieve an acceptable level of quality. The objective of this thesis was to improve the interoperability between network elements in NGNs by creating a testing scheme comprising of three diverse testing methods: conformance testing, interoperability testing and posthoc analysis. In the first project a novel conformance testing methodology for developing sets of conformance test cases for service specifications in NGNs was proposed. This methodology significantly improves the chance of interoperability and provides a considerable enhancement to the currently used interoperability tests. It was evaluated by successfully applying it to the Presence Service. The second report proposed a post-hoc methodology which enables the identification of the ultimate causes for interoperability problems in a NGN in daily operation. The new methods were implemented in the tool IMPACT (IP-Based Multi Protocol Posthoc Analyzer and Conformance Tester), which stores all exchanged messages between network elements in a database. Using SQL queries, the causes for errors can be found efficiently. Overall the presented testing scheme improves significantly the chance that network elements interoperate successfully by providing new methods. Beyond that, the quality of the software product is raised by mapping these methods to phases in a process model and providing well defined steps on which test method is the best suited at a certain stage

Methodology for WSN communication technologies automated field tests

Wireless Sensor Networks(WSN) are networks of devices used to sense and act that applies wireless radios to communicate. To achieve a successful implementation of a wireless device it is necessary to take in consideration the existence of a wide variety of radios available, a large number of communication parameters (payload, duty cycle, etc.) and environmental conditions that may affect the device’s behaviour. However, to evaluate a specific radio towards a unique application it might be necessary to conduct trial experiments, with such a vast amount of devices, communication parameters and environmental conditions to take into consideration the number of trial cases generated can be surprisingly high. Thus, making trial experiments to achieve manual validation of wireless communication technologies becomes unsuitable due to the existence of a high number of trial cases on the field. To overcome this technological issue an automated test methodology was introduced, presenting the possibility to acquire data regarding the device’s behaviour when testing several technologies and parameters that care for a specific analysis. Therefore, this method advances the validation and analysis process of the wireless radios and allows the validation to be done without the need of specific and in depth knowledge about wireless devices

New Challenges in Quality of Services Control Architectures in Next Generation Networks

A mesura que Internet i les xarxes IP s'han anat integrant dins la societat i les corporacions, han anat creixent les expectatives de nous serveis convergents així com les expectatives de qualitat en les comunicacions. Les Next Generation Networks (NGN) donen resposta a les noves necessitats i representen el nou paradigma d'Internet a partir de la convergència IP. Un dels aspectes menys desenvolupats de les NGN és el control de la Qualitat del Servei (QoS), especialment crític en les comunicacions multimèdia a través de xarxes heterogènies i/o de diferents operadors. A més a més, les NGN incorporen nativament el protocol IPv6 que, malgrat les deficiències i esgotament d'adreces IPv4, encara no ha tingut l'impuls definitiu.Aquesta tesi està enfocada des d'un punt de vista pràctic. Així doncs, per tal de poder fer recerca sobre xarxes de proves (o testbeds) que suportin IPv6 amb garanties de funcionament, es fa un estudi en profunditat del protocol IPv6, del seu grau d'implementació i dels tests de conformància i interoperabilitat existents que avaluen la qualitat d'aquestes implementacions. A continuació s'avalua la qualitat de cinc sistemes operatius que suporten IPv6 mitjançant un test de conformància i s'implementa el testbed IPv6 bàsic, a partir del qual es farà la recerca, amb la implementació que ofereix més garanties.El QoS Broker és l'aportació principal d'aquesta tesi: un marc integrat que inclou un sistema automatitzat per gestionar el control de la QoS a través de sistemes multi-domini/multi-operador seguint les recomanacions de les NGN. El sistema automatitza els mecanismes associats a la configuració de la QoS dins d'un mateix domini (sistema autònom) mitjançant la gestió basada en polítiques de QoS i automatitza la negociació dinàmica de QoS entre QoS Brokers de diferents dominis, de forma que permet garantir QoS extrem-extrem sense fissures. Aquesta arquitectura es valida sobre un testbed de proves multi-domini que utilitza el mecanisme DiffServ de QoS i suporta IPv6.L'arquitectura definida en les NGN permet gestionar la QoS tant a nivell 3 (IP) com a nivell 2 (Ethernet, WiFi, etc.) de forma que permet gestionar també xarxes PLC. Aquesta tesi proposa una aproximació teòrica per aplicar aquesta arquitectura de control, mitjançant un QoS Broker, a les noves xarxes PLC que s'estan acabant d'estandarditzar, i discuteix les possibilitats d'aplicació sobre les futures xarxes de comunicació de les Smart Grids.Finalment, s'integra en el QoS Broker un mòdul per gestionar l'enginyeria del tràfic optimitzant els dominis mitjançant tècniques de intel·ligència artificial. La validació en simulacions i sobre un testbed amb routers Cisco demostra que els algorismes genètics híbrids són una opció eficaç en aquest camp.En general, les observacions i avenços assolits en aquesta tesi contribueixen a augmentar la comprensió del funcionament de la QoS en les NGN i a preparar aquests sistemes per afrontar problemes del món real de gran complexitat.A medida que Internet y las redes IP se han ido integrando dentro de la sociedad y las corporaciones, han ido creciendo las expectativas de nuevos servicios convergentes así como las expectativas de calidad en las comunicaciones. Las Next Generation Networks (NGN) dan respuesta a las nuevas necesidades y representan el nuevo paradigma de Internet a partir de la convergencia IP. Uno de los aspectos menos desarrollados de las NGN es el control de la Calidad del Servicio (QoS), especialmente crítico en las comunicaciones multimedia a través de redes heterogéneas y/o de diferentes operadores. Además, las NGN incorporan nativamente el protocolo IPv6 que, a pesar de las deficiencias y agotamiento de direcciones IPv4, aún no ha tenido el impulso definitivo.Esta tesis está enfocada desde un punto de vista práctico. Así pues, con tal de poder hacer investigación sobre redes de prueba (o testbeds) que suporten IPv6 con garantías de funcionamiento, se hace un estudio en profundidad del protocolo IPv6, de su grado de implementación y de los tests de conformancia e interoperabilidad existentes que evalúan la calidad de estas implementaciones. A continuación se evalua la calidad de cinco sistemas operativos que soportan IPv6 mediante un test de conformancia y se implementa el testbed IPv6 básico, a partir del cual se realizará la investigación, con la implementación que ofrece más garantías.El QoS Broker es la aportación principal de esta tesis: un marco integrado que incluye un sistema automatitzado para gestionar el control de la QoS a través de sistemas multi-dominio/multi-operador siguiendo las recomendaciones de las NGN. El sistema automatiza los mecanismos asociados a la configuración de la QoS dentro de un mismo dominio (sistema autónomo) mediante la gestión basada en políticas de QoS y automatiza la negociación dinámica de QoS entre QoS brokers de diferentes dominios, de forma que permite garantizar QoS extremo-extremo sin fisuras. Esta arquitectura se valida sobre un testbed de pruebas multi-dominio que utiliza el mecanismo DiffServ de QoS y soporta IPv6. La arquitectura definida en las NGN permite gestionar la QoS tanto a nivel 3 (IP) o como a nivel 2 (Ethernet, WiFi, etc.) de forma que permite gestionar también redes PLC. Esta tesis propone una aproximación teórica para aplicar esta arquitectura de control, mediante un QoS Broker, a las noves redes PLC que se están acabando de estandardizar, y discute las posibilidades de aplicación sobre las futuras redes de comunicación de las Smart Grids.Finalmente, se integra en el QoS Broker un módulo para gestionar la ingeniería del tráfico optimizando los dominios mediante técnicas de inteligencia artificial. La validación en simulaciones y sobre un testbed con routers Cisco demuestra que los algoritmos genéticos híbridos son una opción eficaz en este campo.En general, las observaciones y avances i avances alcanzados en esta tesis contribuyen a augmentar la comprensión del funcionamiento de la QoS en las NGN y en preparar estos sistemas para afrontar problemas del mundo real de gran complejidad.The steady growth of Internet along with the IP networks and their integration into society and corporations has brought with it increased expectations of new converged services as well as greater demands on quality in communications. The Next Generation Networks (NGNs) respond to these new needs and represent the new Internet paradigm from the IP convergence. One of the least developed aspects in the NGNs is the Quality of Service (QoS) control, which is especially critical in the multimedia communication through heterogeneous networks and/or different operators. Furthermore, the NGNs natively incorporate the IPv6 protocol which, despite its shortcomings and the depletion of IPv4 addresses has not been boosted yet.This thesis has been developed with a practical focus. Therefore, with the aim of carrying out research over testbeds supporting the IPv6 with performance guarantees, an in-depth study of the IPv6 protocol development has been conducted and its degree of implementation and the existing conformance and interoperability tests that evaluate these implementations have been studied. Next, the quality of five implementations has been evaluated through a conformance test and the basic IPv6 testbed has been implemented, from which the research will be carried out. The QoS Broker is the main contribution to this thesis: an integrated framework including an automated system for QoS control management through multi-domain/multi-operator systems according to NGN recommendations. The system automates the mechanisms associated to the QoS configuration inside the same domain (autonomous system) through policy-based management and automates the QoS dynamic negotiation between peer QoS Brokers belonging to different domains, so it allows the guarantee of seamless end-to-end QoS. This architecture is validated over a multi-domain testbed which uses the QoS DiffServ mechanism and supports IPv6.The architecture defined in the NGN allows QoS management at level 3 (IP) as well as at level 2 (e.g. Ethernet, WiFi) so it also facilitates the management of PLC networks. Through the use of a QoS Broker, this thesis proposes a theoretical approach for applying this control architecture to the newly standardized PLC networks, and discusses the possibilities of applying it over the future communication networks of the Smart Grids.Finally, a module for managing traffic engineering which optimizes the network domains through artificial intelligence techniques is integrated in the QoS Broker. The validations by simulations and over a Cisco router testbed demonstrate that hybrid genetic algorithms are an effective option in this area.Overall, the advances and key insights provided in this thesis help advance our understanding of QoS functioning in the NGNs and prepare these systems to face increasingly complex problems, which abound in current industrial and scientific applications

Métodos y Herramientas para el Diseño y Verificación de Sistemas de Comunicaciones Móviles

El objetivo de esta Tesis ha sido la consecución de tecnología para el diseño y mantenimiento eficientes, en coste temporal y económico, de Sistemas de Pruebas para equipos de comunicaciones inalámbricas. El proceso de diseño elaborado se ha basado en un conjunto de principios básicos: uso de lenguajes y notaciones ITU, independencia de la plataforma de ejecución y uso de herramientas comerciales. En esta Tesis se describe: a) Una arquitectura genérica para Sistemas de Pruebas. b) Una Metodología de Diseño de Sistemas de Pruebas. c) Un conjunto de herramientas de soporte. d) Una propuesta de metodología para el modelado con SDL. e) La aplicación a Sistemas de Pruebas de capa física de la arquitectura, métodos y herramientas utilizados en el área de protocolos. f) Un conjunto de implementaciones que validan las aportaciones anteriores

Model Driven Communication Protocol Engineering and Simulation based Performance Analysis using UML 2.0

The automated functional and performance analysis of communication systems specified with some Formal Description Technique has long been the goal of telecommunication engineers. In the past SDL and Petri nets have been the most popular FDTs for the purpose. With the growth in popularity of UML the most obvious question to ask is whether one can translate one or more UML diagrams describing a system to a performance model. Until the advent of UML 2.0, that has been an impossible task since the semantics were not clear. Even though the UML semantics are still not clear for the purpose, with UML 2.0 now released and using ITU recommendation Z.109, we describe in this dissertation a methodology and tool called proSPEX (protocol Software Performance Engineering using XMI), for the design and performance analysis of communication protocols specified with UML. Our first consideration in the development of our methodology was to identify the roles of UML 2.0 diagrams in the performance modelling process. In addition, questions regarding the specification of non-functional duration contraints, or temporal aspects, were considered. We developed a semantic time model with which a lack of means of specifying communication delay and processing times in the language are addressed. Environmental characteristics such as channel bandwidth and buffer space can be specified and realistic assumptions are made regarding time and signal transfer. With proSPEX we aimed to integrate a commercial UML 2.0 model editing tool and a discrete-event simulation library. Such an approach has been advocated as being necessary in order to develop a closer integration of performance engineering with formal design and implementation methodologies. In order to realize the integration we firstly identified a suitable simulation library and then extended the library with features required to represent high-level SDL abstractions, such as extended finite state machines (EFSM) and signal addressing. In implementing proSPEX we filtered the XML output of our editor and used text templates for code generation. The filtering of the XML output and the need to extend our simulation library with EFSM abstractions was found to be significant implementation challenges. Lastly, in order to to illustrate the utility of proSPEX we conducted a performance analysis case-study in which the efficient short remote operations (ESRO) protocol is used in a wireless e-commerce scenario

Insights from the Inventory of Smart Grid Projects in Europe: 2012 Update

By the end of 2010 the Joint Research Centre, the European Commission’s in-house science service, launched the first comprehensive inventory of smart grid projects in Europe1. The final catalogue was published in July 2011 and included 219 smart grid and smart metering projects from the EU-28 member states, Switzerland and Norway. The participation of the project coordinators and the reception of the report by the smart grid community were extremely positive. Due to its success, the European Commission decided that the project inventory would be carried out on a regular basis so as to constantly update the picture of smart grid developments in Europe and keep track of lessons learnt and of challenges and opportunities. For this, a new on-line questionnaire was launched in March 2012 and information on projects collected up to September 2012. At the same time an extensive search of project information on the internet and through cooperation links with other European research organizations was conducted. The resulting final database is the most up to date and comprehensive inventory of smart grids and smart metering projects in Europe, including a total of 281 smart grid projects and 90 smart metering pilot projects and rollouts from the same 30 countries that were included in the 2011 inventory database. Projects surveyed were classified into three categories: R&D, demonstration or pre-deployment) and deployment, and for the first time a distinction between smart grid and smart metering projects was made. The following is an insight into the 2012 report.JRC.F.3-Energy securit

Radio Communications

In the last decades the restless evolution of information and communication technologies (ICT) brought to a deep transformation of our habits. The growth of the Internet and the advances in hardware and software implementations modified our way to communicate and to share information. In this book, an overview of the major issues faced today by researchers in the field of radio communications is given through 35 high quality chapters written by specialists working in universities and research centers all over the world. Various aspects will be deeply discussed: channel modeling, beamforming, multiple antennas, cooperative networks, opportunistic scheduling, advanced admission control, handover management, systems performance assessment, routing issues in mobility conditions, localization, web security. Advanced techniques for the radio resource management will be discussed both in single and multiple radio technologies; either in infrastructure, mesh or ad hoc networks