Artificial intelligent based friction modelling and compensation in motion control system

The interest in the study of friction in control engineering has been driven by the need for 10 precise motion control in most of industrial applications such as machine tools, robot 11 systems, semiconductor manufacturing systems and Mechatronics systems. Friction has 12 been experimentally shown to be a major factor in performance degradation in various 13 control tasks. Among the prominent effects of friction in motion control are: steady state 14 error to a reference command, slow response, periodic process of sticking and sliding (stick-15 slip) motion, as well as periodic oscillations about a reference point known as hunting when 16 an integral control is employed in the control scheme. Table 1 shows the effects and type of 17 friction as highlighted by Armstrong et. al.(1994). It is observed that, each of task is 18 dominated by at least one friction effect ranging from stiction, or/and kinetic to negative 19 friction (Stribeck). Hence, the need for accurate compensation of friction has become 20 important in high precision motion control. Several techniques to alleviate the effects of 21 friction have been reported in the literature (Dupont and Armstrong, 1993; Wahyudi, 2003; 22 Tjahjowidodo, 2004; Canudas, et. al., 1986). 23 One of the successful methods is the well-known model-based friction compensation 24 (Armstrong et al., 1994; Canudas de Wit et al., 1995 and Wen-Fang, 2007). In this method, 25 the effect of the friction is cancelled by applying additional control signal which generates a 26 torque/force. The generated torque/force has the same value (or approximately the same) 27 with the friction torque/force but in opposite direction

A novel haptic model and environment for maxillofacial surgical operation planning and manipulation

This paper presents a practical method and a new haptic model to support manipulations of bones and their segments during the planning of a surgical operation in a virtual environment using a haptic interface. To perform an effective dental surgery it is important to have all the operation related information of the patient available beforehand in order to plan the operation and avoid any complications. A haptic interface with a virtual and accurate patient model to support the planning of bone cuts is therefore critical, useful and necessary for the surgeons. The system proposed uses DICOM images taken from a digital tomography scanner and creates a mesh model of the filtered skull, from which the jaw bone can be isolated for further use. A novel solution for cutting the bones has been developed and it uses the haptic tool to determine and define the bone-cutting plane in the bone, and this new approach creates three new meshes of the original model. Using this approach the computational power is optimized and a real time feedback can be achieved during all bone manipulations. During the movement of the mesh cutting, a novel friction profile is predefined in the haptical system to simulate the force feedback feel of different densities in the bone

Five-Axis Machine Tool Condition Monitoring Using dSPACE Real-Time System

This paper presents the design, development and SIMULINK implementation of the lumped parameter model of C-axis drive from GEISS five-axis CNC machine tool. The simulated results compare well with the experimental data measured from the actual machine. Also the paper describes the steps for data acquisition using ControlDesk and hardware-in-the-loop implementation of the drive models in dSPACE real-time system. The main components of the HIL system are: the drive model simulation and input – output (I/O) modules for receiving the real controller outputs. The paper explains how the experimental data obtained from the data acquisition process using dSPACE real-time system can be used for the development of machine tool diagnosis and prognosis systems that facilitate the improvement of maintenance activities

STUDY OF FRICTION COMPENSATION MODEL FOR MOBILE ROBOT’S JOINTS

Frictional forces inside the joints of mobile robots hurt robot operation's stability and positioning accuracy. Therefore, establishing a suitable friction force compensation model has been a hot research topic in robotics. To explore the robot joint friction compensation model, three friction compensation models: linear, nonlinear, and neural network models, are developed in this paper. Based on the deep learning algorithm for three models at low speed, high speed, acceleration, and uniform speed training test, respectively results have been obtained. The test results show that the best friction compensation effect comes from combining neural network models in acceleration and a consistent speed state way. The friction compensation model trained this way yielded superior results to the other combinations tested. Finally, using the method, a friction compensation model trained by adding a neural network to the feedforward control torque was tested on a four-wheeled mobile robot platform. The test results show that the relative error of the torque caused by the friction of each joint is reduced by 15%-75% in 8 groups of tests, which indicates that our friction compensation method has a positive effect on improving the accuracy of the joint torque

ระบบควบคุมแบบไฮบริดโดยอิงแรงและสัญญาณไฟฟ้ากล้ามเนื้อสำหรับหุ่นยนต์ทำกายภาพบำบัด

This paper presents a hybrid control system of rehabilitation robot with force and EMG signals. The proposed control system is implemented on the elbow joint of the 4 DOF universal exoskeleton. Admittance control method is applied to control this rehabilitation robot. However, the transient response of the admittance control cloud lead in a large overshoot when the user moves exoskeleton joint quickly then suddenly stops. Hence, the EMG sensor is used to detect the muscle contraction and then the force input will be set to zero for improving transient response of the hybrid controller. Furthermore, the generalized regression neural network (GRNN) is applied for predicting the static gravity force compensation. The experimental result indicates that the GRNN can predict the static gravity force with accuracy of 97.32%. Moreover, 83.13% of the transient response is improved by the utilization of the EMG signal in the hybrid controller

Learning-based adaption of robotic friction models

In the Fourth Industrial Revolution, wherein artificial intelligence and the automation of machines occupy a central role, the deployment of robots is indispensable. However, the manufacturing process using robots, especially in collaboration with humans, is highly intricate. In particular, modeling the friction torque in robotic joints is a longstanding problem due to the lack of a good mathematical description. This motivates the usage of data-driven methods in recent works. However, model-based and data-driven models often exhibit limitations in their ability to generalize beyond the specific dynamics they were trained on, as we demonstrate in this paper. To address this challenge, we introduce a novel approach based on residual learning, which aims to adapt an existing friction model to new dynamics using as little data as possible. We validate our approach by training a base neural network on a symmetric friction data set to learn an accurate relation between the velocity and the friction torque. Subsequently, to adapt to more complex asymmetric settings, we train a second network on a small dataset, focusing on predicting the residual of the initial network's output. By combining the output of both networks in a suitable manner, our proposed estimator outperforms the conventional model-based approach and the base neural network significantly. Furthermore, we evaluate our method on trajectories involving external loads and still observe a substantial improvement, approximately 60-70\%, over the conventional approach. Our method does not rely on data with external load during training, eliminating the need for external torque sensors. This demonstrates the generalization capability of our approach, even with a small amount of data-only 43 seconds of a robot movement-enabling adaptation to diverse scenarios based on prior knowledge about friction in different settings

From model-driven to data-driven : a review of hysteresis modeling in structural and mechanical systems

Hysteresis is a natural phenomenon that widely exists in structural and mechanical systems. The characteristics of structural hysteretic behaviors are complicated. Therefore, numerous methods have been developed to describe hysteresis. In this paper, a review of the available hysteretic modeling methods is carried out. Such methods are divided into: a) model-driven and b) datadriven methods. The model-driven method uses parameter identification to determine parameters. Three types of parametric models are introduced including polynomial models, differential based models, and operator based models. Four algorithms as least mean square error algorithm, Kalman filter algorithm, metaheuristic algorithms, and Bayesian estimation are presented to realize parameter identification. The data-driven method utilizes universal mathematical models to describe hysteretic behavior. Regression model, artificial neural network, least square support vector machine, and deep learning are introduced in turn as the classical data-driven methods. Model-data driven hybrid methods are also discussed to make up for the shortcomings of the two methods. Based on a multi-dimensional evaluation, the existing problems and open challenges of different hysteresis modeling methods are discussed. Some possible research directions about hysteresis description are given in the final section