A Survey on the Path Computation Element (PCE) Architecture

Quality of Service-enabled applications and services rely on Traffic Engineering-based (TE) Label Switched Paths (LSP) established in core networks and controlled by the GMPLS control plane. Path computation process is crucial to achieve the desired TE objective. Its actual effectiveness depends on a number of factors. Mechanisms utilized to update topology and TE information, as well as the latency between path computation and resource reservation, which is typically distributed, may affect path computation efficiency. Moreover, TE visibility is limited in many network scenarios, such as multi-layer, multi-domain and multi-carrier networks, and it may negatively impact resource utilization. The Internet Engineering Task Force (IETF) has promoted the Path Computation Element (PCE) architecture, proposing a dedicated network entity devoted to path computation process. The PCE represents a flexible instrument to overcome visibility and distributed provisioning inefficiencies. Communications between path computation clients (PCC) and PCEs, realized through the PCE Protocol (PCEP), also enable inter-PCE communications offering an attractive way to perform TE-based path computation among cooperating PCEs in multi-layer/domain scenarios, while preserving scalability and confidentiality. This survey presents the state-of-the-art on the PCE architecture for GMPLS-controlled networks carried out by research and standardization community. In this work, packet (i.e., MPLS-TE and MPLS-TP) and wavelength/spectrum (i.e., WSON and SSON) switching capabilities are the considered technological platforms, in which the PCE is shown to achieve a number of evident benefits

IDEALIST control and service management solutions for dynamic and adaptive flexi-grid DWDM networks

Wavelength Switched Optical Networks (WSON) were designed with the premise that all channels in a network have the same spectrum needs, based on the ITU-T DWDM grid. However, this rigid grid-based approach is not adapted to the spectrum requirements of the signals that are best candidates for long-reach transmission and high-speed data rates of 400Gbps and beyond. An innovative approach is to evolve the fixed DWDM grid to a flexible grid, in which the optical spectrum is partitioned into fixed-sized spectrum slices. This allows facilitating the required amount of optical bandwidth and spectrum for an elastic optical connection to be dynamically and adaptively allocated by assigning the necessary number of slices of spectrum. The ICT IDEALIST project will provide the architectural design, protocol specification, implementation, evaluation and standardization of a control plane and a network and service management system. This architecture and tools are necessary to introduce dynamicity, elasticity and adaptation in flexi-grid DWDM networks. This paper provides an overview of the objectives, framework, functional requirements and use cases of the elastic control plane and the adaptive network and service management system targeted in the ICT IDEALIST project

IDEALIST control and service management solutions for dynamic and adaptive flexi-grid DWDM networks

Personal use of this material is permitted. Permission from IEEE must be obtained for all other uses, in any current or future media, including reprinting/republishing this material for advertising or promotional purposes, creating new collective works, for resale or redistribution to servers or lists, or reuse of any copyrighted component of this work in other works. R. Muñoz, V. López, R. Casellas, O. González de Dios, F. Cugini, N. Sambo, A. d'Errico, O. Gerstel, D. King, S. López-Buedo, P. Layec, A. Cimmino, R. Martínez, and R. Moro, "IDEALIST control and service management solutions for dynamic and adaptive flexi-grid DWDM networks", in Future Network and Mobile Summit, 2013, pp. 1-10Wavelength Switched Optical Networks (WSON) were designed with the premise that all channels in a network have the same spectrum needs, based on the ITU-T DWDM grid. However, this rigid grid-based approach is not adapted to the spectrum requirements of the signals that are best candidates for long-reach transmission and high-speed data rates of 400Gbps and beyond. An innovative approach is to evolve the fixed DWDM grid to a flexible grid, in which the optical spectrum is partitioned into fixed-sized spectrum slices. This allows facilitating the required amount of optical bandwidth and spectrum for an elastic optical connection to be dynamically and adaptively allocated by assigning the necessary number of slices of spectrum. The ICT IDEALIST project will provide the architectural design, protocol specification, implementation, evaluation and standardization of a control plane and a network and service management system. This architecture and tools are necessary to introduce dynamicity, elasticity and adaptation in flexi-grid DWDM networks. This paper provides an overview of the objectives, framework, functional requirements and use cases of the elastic control plane and the adaptive network and service management system targeted in the ICT IDEALIST project.This work was partially funded by the European Community’s Seventh Framework Programme FP7/2007-2013 through the Integrated Project (IP) IDEALIST under grant agreement nº 317999

Path state-based update of PCE traffic engineering database in wavelength switched optical networks

n/

Preserving confidentiality in PCE-based multi-domain networks

n/

Multi-partner Demonstration of BGPLS enabled multi-domain EON control and instantiation with H-PCE

The control of multidomain elastic optical networks (EONs) is possible by combining Hierarchical Path Computation Element (H-PCE)-based computation, Border Gateway Protocol with Extensions for Traffic Engineering Link State Information (BGP-LS) topology discovery, remote instantiation via Path Computation Element Communication Protocol (PCEP), and signaling via Resource Reservation Protocol with Extensions for Traffic Engineering (RSVP-TE). Two evolutionary architectures are considered, one based on stateless H-PCE, PCEP instantiation, and end-to-end RSVP-TE signaling (SL-E2E), and a second one based on stateful active H-PCE with per-domain instantiation and stitching. This paper presents the first multiplatform demonstration that fully validates both control architectures achieving multiprotocol interoperability. SL-E2E leads to slightly faster provisioning but needs to keep the state of the stitching of the end-to-end label-switched paths in the parent PCE