Finding Cyclic Redundancy Check Polynomials for Multilevel Systems

This letter describes a technique for finding cyclic redundancy check polynomials for systems for transmission over symmetric channels which encode information in multiple voltage levels, so that the resulting redundancy check gives good error protection and is efficient to implement. The codes which we construct have a Hamming distance of 3 or 4. We discuss a way to reduce burst error in parallel transmissions and some tricks for efficient implementation of the shift register for these polynomials. We illustrate our techniques by discussing a particular example where the number of levels is 9, but they are applicable in general

Performance of generalized BCH codes over GF(qs)

Due to the character of the original source materials and the nature of batch digitization, quality control issues may be present in this document. Please report any quality issues you encounter to [email protected], referencing the URI of the item.Includes bibliographical references: p. 44-45.Issued also on microfiche from Lange Micrographics.Not availabl

Analysis and Constructions of Subspace Codes

Random network coding is the most effcient way to send data across a network, but it is very susceptible to errors and erasures. In 2008, Kotter and Kschischang introduced subspace codes as an algebraic approach to error correcting in random network coding. Since this paper, there has been much work in constructing large subspace codes, as well as exploring the properties of such codes. This dissertation explores properties of one particular construction and introduces a new construction for subspace codes. We begin by exploring properties of irreducible cyclic orbit codes, which were introduced in 2011 by Rosenthal et al. As the name implies, irreducible cyclic orbit codes are the orbits of a group action of the general linear group on subspaces. By studying the stabilizers of this action, we formalize the notion of the stabilizer subfield of a subspace and utilize it to gain information about cardinality and distance of the code. Additionally, I define the linkage construction, which is recursive, and compare it to other subspace code constructions. In particular, we use the linkage construction to generalize some constructions of partial spreads. Finally, we address situations for which the linkage construction is eciently decodable

Code design and analysis for multiple access communications

This thesis explores various coding aspects of multiple access communications, mainly for spread spectrum multiaccess(SSMA) communications and collaborative coding multiaccess(CCMA) communications. Both the SSMA and CCMA techniques permit efficient simultaneous transmission by several users sharing a common channel, without subdivision in time or frequency. The general principle behind these two multiaccess schemes is that one can find sets of signals (codes) which can be combined together to form a composite signal; on reception, the individual signals in the set can each be recovered from the composite signal. For the CCMA scheme, the isolation between users is based on the code structure; for the SSMA scheme, on the other hand, the isolation between users is based on the autocorrelation functions(ACFs) and crosscorrelation functions (CCFs) of the code sequences. It is clear that, in either case, the code design is the key to the system design.For the CCMA system with a multiaccess binary adder channel, a class of superimposed codes is analyzed. It is proved that every constant weight code of weight w and maximal correlation λ corresponds to a subclass of disjunctive codes of order T 3, the out-of-phase ACFs and CCFs of the codes are constant and equal to √L. In addition, all codes of the same length are mutually orthogonal.2. Maximal length sequences (m-sequences) over Gaussian integers, suitable for use with QAM modulation, are considered. Two sub-classes of m-sequences with quasi-perfect periodic autocorrelations are obtained. The CCFs between the decimated m-sequences are studied. By applying a simple operation, it is shown that some m-sequences over rational and Gaussian integers can be transformed into perfect sequences with impulsive ACFs.3. Frank codes and Chu codes have perfect periodic ACFs and optimum periodic CCFs. In addition, it is shown that they also have very favourable nonperiodic ACFs; some new results concerning the behaviour of the nonperiodic ACFs are derived. Further, it is proved that the sets of combinedFrank/Chu codes, which contain a larger number of codes than either of the two constituent sets, also have very good periodic CCFs. Based on Frank codes and Chu codes, two interesting classes of real-valued codes with good correlation properties are defined. It is shown that these codes have periodic complementary properties and good periodic and nonperiodic ACF/CCFs.Finally, a hybrid CCMA/SSMA coding scheme is proposed. This new hybrid coding scheme provides a very flexible and powerful multiple accessing capability and allows simple and efficient decoding. Given an SSMA system with K users and a CCMA system with N users, where at most T users are active at any time, then the hybrid system will have K . N users with at most T.K users active at any time. The hybrid CCMA/SSMA coding scheme is superior to the individual CCMA system or SSMA system in terms of information rate, number of users, decoding complexity and external interference rejection capability

Code design and analysis for multiple access communications

This thesis explores various coding aspects of multiple access communications, mainly for spread spectrum multiaccess(SSMA) communications and collaborative coding multiaccess(CCMA) communications. Both the SSMA and CCMA techniques permit efficient simultaneous transmission by several users sharing a common channel, without subdivision in time or frequency. The general principle behind these two multiaccess schemes is that one can find sets of signals (codes) which can be combined together to form a composite signal; on reception, the individual signals in the set can each be recovered from the composite signal. For the CCMA scheme, the isolation between users is based on the code structure; for the SSMA scheme, on the other hand, the isolation between users is based on the autocorrelation functions(ACFs) and crosscorrelation functions (CCFs) of the code sequences. It is clear that, in either case, the code design is the key to the system design.For the CCMA system with a multiaccess binary adder channel, a class of superimposed codes is analyzed. It is proved that every constant weight code of weight w and maximal correlation λ corresponds to a subclass of disjunctive codes of order T 3, the out-of-phase ACFs and CCFs of the codes are constant and equal to √L. In addition, all codes of the same length are mutually orthogonal.2. Maximal length sequences (m-sequences) over Gaussian integers, suitable for use with QAM modulation, are considered. Two sub-classes of m-sequences with quasi-perfect periodic autocorrelations are obtained. The CCFs between the decimated m-sequences are studied. By applying a simple operation, it is shown that some m-sequences over rational and Gaussian integers can be transformed into perfect sequences with impulsive ACFs.3. Frank codes and Chu codes have perfect periodic ACFs and optimum periodic CCFs. In addition, it is shown that they also have very favourable nonperiodic ACFs; some new results concerning the behaviour of the nonperiodic ACFs are derived. Further, it is proved that the sets of combinedFrank/Chu codes, which contain a larger number of codes than either of the two constituent sets, also have very good periodic CCFs. Based on Frank codes and Chu codes, two interesting classes of real-valued codes with good correlation properties are defined. It is shown that these codes have periodic complementary properties and good periodic and nonperiodic ACF/CCFs.Finally, a hybrid CCMA/SSMA coding scheme is proposed. This new hybrid coding scheme provides a very flexible and powerful multiple accessing capability and allows simple and efficient decoding. Given an SSMA system with K users and a CCMA system with N users, where at most T users are active at any time, then the hybrid system will have K . N users with at most T.K users active at any time. The hybrid CCMA/SSMA coding scheme is superior to the individual CCMA system or SSMA system in terms of information rate, number of users, decoding complexity and external interference rejection capability

Bit flipping decoding for binary product codes

Error control coding has been used to mitigate the impact of noise on the wireless channel. Today, wireless communication systems have in their design Forward Error Correction (FEC) techniques to help reduce the amount of retransmitted data. When designing a coding scheme, three challenges need to be addressed, the error correcting capability of the code, the decoding complexity of the code and the delay introduced by the coding scheme. While it is easy to design coding schemes with a large error correcting capability, it is a challenge finding decoding algorithms for these coding schemes. Generally increasing the length of a block code increases its error correcting capability and its decoding complexity. Product codes have been identified as a means to increase the block length of simpler codes, yet keep their decoding complexity low. Bit flipping decoding has been identified as simple to implement decoding algorithm. Research has generally been focused on improving bit flipping decoding for Low Density Parity Check codes. In this study we develop a new decoding algorithm based on syndrome checking and bit flipping to use for binary product codes, to address the major challenge of coding systems, i.e., developing codes with a large error correcting capability yet have a low decoding complexity. Simulated results show that the proposed decoding algorithm outperforms the conventional decoding algorithm proposed by P. Elias in BER and more significantly in WER performance. The algorithm offers comparable complexity to the conventional algorithm in the Rayleigh fading channel