FTN multicarrier transmission based on tight Gabor frames

A multicarrier signal can be synthesized thanks to a symbol sequence and a Gabor family (i.e., a regularly time-frequency shifted version of a generator pulse). In this article, we consider the case where the signaling density is increased such that inter-pulse interference is unavoidable.Over an additive white Gaussian noise channel, we show that the signal-to-interference-plus-noise ratio is maximized when the transmitter and the receiver use the same tight Gabor frame. What is more, we give practical efficient realization schemes and show how to build tight frames based on usual generators. Theoretical and simulated bit-error-probability are given for a non-coded system using quadrature amplitude modulations. Such a characterization is then used to predict the convergence of a coded system using low-density parity-check codes. We also study the robustness of such a system to errors on the received bits in an interference cancellation context

The Alamouti Scheme with CDMA-OFDM/OQAM

This paper deals with the combination of OFDM/OQAM with the Alamouti scheme. After a brief presentation of the OFDM/OQAM modulation scheme, we introduce the fact that the well-known Alamouti decoding scheme cannot be simply applied to this modulation. Indeed, the Alamouti coding scheme requires a complex orthogonality property; whereas OFDM/OQAM only provides real orthogonality. However, as we have recently shown, under some conditions, a transmission scheme combining CDMA and OFDM/OQAM can satisfy the complex orthogonality condition. Adding a CDMA component can thus be seen as a solution to apply the Alamouti scheme in combination with OFDM/OQAM. However, our analysis shows that the CDMA-OFDM/OQAM combination has to be built taking into account particular features of the transmission channel. Our simulation results illustrate the 2×1 Alamouti coding scheme for which CDMA-OFDM/OQAM and CP-OFDM are compared in two different scenarios: (i) CDMA is performed in the frequency domain, (ii) CDMA is performed in time domain

Implementation of the channel equalization algorithms used in FMT modulation

Cílem diplomové práce je návrh aplikace pro analýzu ekvalizérů v modulaci FMT. Pro analýzu je využit model přenosového kanálu s FMT. Přenosová cesta je modelována testovacím vedením, které odpovídá účastnickým přípojkám technologie DSL, z toho důvodu jsou také v různých částech textu popsány některé principy u DSL. První část práce se obecně zabývá problematikou a principy vícetónových modulací, podrobněji je rozebrána modulace realizovaná bankou filtrů (FMT). Jsou popsány různé metody návrhu banky filtrů a porovnány jejich vlastnosti. Druhá část práce se zaměřila na ekvalizaci přenosového kanálu s FMT. Podrobně jsou odvozeny a popsány ekvalizéry s minimalizací středních kvadratických odchylek (MMSE), problematika lineárních ekvalizérů je vždy rozšířena na ekvalizéry se zpětnou vazbou (DFE), které jsou součástí navržené aplikace. Pro výpočet koeficientů ekvalizéru je v aplikaci využito také iteračních neboli adaptivních algoritmů návrhu ekvalizérů na bázi MMSE. V poslední části jsou prezentovány dosažené výsledky s ekvalizéry DFE. Aplikace opatřená grafickým rozhraním a srovnávající naprogramované algoritmy ekvalizace je realizována v prostředí MATLAB. Umožňuje vyhodnocení dosaženého odstupu signál-šum, dosažené minimalizace střední kvadratické odchylky a přenosové rychlosti v závislosti na zpoždění mezi originálním a zkresleným signálem. Odstup signál-šum je také znázorněn v subkanálech pro dané zpoždění a lze zobrazit graf dosažitelné minimalizace v závislosti na různých řádech filtrů u ekvalizéru DFE.The objective of Diploma thesis is design of analysis tool for equalizers used in FMT modulation. The model of transmission channel was designed for simulations with FMT. The transmission path is modeled by test loop, which corresponds to DSL line. For this reason, some principles of DSL technology is described in the thesis. The principles of multicarrier modulation are introduced in first part. The multicarrier modulation with filter bank (FMT) is described in detail.The different methods of design the fiter bank are given and compared. Channel equalization are introduced in second part. The attention was focused on minimum mean square error filtering (MMSE). Decision feedback channel equalizer (DFE) is extended from linear MMSE equalizer. DFE equalizers were programmed in analysis tool. For computation of equalizer coeficients was used also equalizers based on adaptive algorithms and MMSE. The last part describes the results of DFE equalizers used in communication system with FMT modulation. Analysis tool was programmed in MATLAB with a graphical user interface. It allows to show mean square error, signal-to-noise ratio and transmission speed dependence on delay between original and distorted signal. Signal-to-noise ration is displayed also in individual subchannels and users can display mean square error dependence on different orders of DFE filters.

Doctor of Philosophy

dissertationThe demand for high speed communication has been increasing in the past two decades. Multicarrier communication technology has been suggested to address this demand. Orthogonal frequency-division multiplexing (OFDM) is the most widely used multicarrier technique. However, OFDM has a number of disadvantages in time-varying channels, multiple access, and cognitive radios. On the other hand, filterbank multicarrier (FBMC) communication has been suggested as an alternative to OFDM that can overcome the disadvantages of OFDM. In this dissertation, we investigate the application of filtered multitone (FMT), a subset of FBMC modulation methods, to slow fading and fast fading channels. We investigate the FMT transmitter and receiver in continuous and discrete time domains. An efficient implementation of FMT systems is derived and the conditions for perfect reconstruction in an FBMC communication system are presented. We derive equations for FMT in slow fading channels that allow evaluation of FMT when applied to mobile wireless communication systems. We consider using fractionally spaced per tone channel equalizers with different number of taps. The numerical results are presented to investigate the performance of these equalizers. The numerical results show that single-tap equalizers suffice for typical wireless channels. The equalizer design study is advanced by introducing adaptive equalizers which use channel estimation. We derive equations for a minimum mean square error (MMSE) channel estimator and improve the channel estimation by considering the finite duration of channel impulse response. The results of optimum equalizers (when channel is known perfectly) are compared with those of the adaptive equalizers, and it is found that a loss of 1 dB or less incurs. We also introduce a new form of FMT which is specially designed to handle doubly dispersive channels. This method is called FMT-dd (FMT for doubly dispersive channels). The proposed FMT-dd is applied to two common methods of data symbol orientation in the time-frequency space grid; namely, rectangular and hexagonal lattices. The performance of these methods along with OFDM and the conventional FMT are compared and a significant improvement in performance is observed. The FMT-dd design is applied to real-world underwater acoustic (UWA) communication channels. The experimental results from an at-sea experiment (ACOMM10) show that this new design provides a significant gain over OFDM. The feasibility of implementing a MIMO system for multicarrier UWA communication channels is studied through computer simulations. Our study emphasizes the bandwidth efficiency of multicarrier MIMO communications .We show that the value of MIMO to UWA communication is very limited

Doctor of Philosophy

dissertationWireless communications pervade all avenues of modern life. The rapid expansion of wireless services has increased the need for transmission schemes that are more spectrally efficient. Dynamic spectrum access (DSA) systems attempt to address this need by building a network where the spectrum is used opportunistically by all users based on local and regional measurements of its availability. One of the principal requirements in DSA systems is to initialize and maintain a control channel to link the nodes together. This should be done even before a complete spectral usage map is available. Additionally, with more users accessing the spectrum, it is important to maintain a stable link in the presence of significant interference in emergency first-responders, rescue, and defense applications. In this thesis, a new multicarrier spread spectrum (MC-SS) technique based on filter banks is presented. The new technique is called filter bank multicarrier spread spectrum (FB-MC-SS). A detailed theory of the underlying properties of this signal are given, with emphasis on the properties that lend themselves to synchronization at the receiver. Proposed algorithms for synchronization, channel estimation, and detection are implemented on a software-defined radio platform to complete an FB-MC-SS transceiver and to prove the practicality of the technique. FB-MC-SS is shown through physical experimentation to be significantly more robust to partial band interference compared to direct sequence spread spectrum. With a higher power interfering signal occupying 90% of its band, FB-MC-SS maintains a low bit error rate. Under the same interference conditions, DS-SS fails completely. This experimentation leads to a theoretical analysis that shows in a frequency selective channel with additive white noise, the FB-MC-SS system has performance that equals that obtained by a DS-SS system employing an optimal rake receiver. This thesis contains a detailed chapter on implementation and design, including lessons learned while prototyping the system. This is to assist future system designers to quickly gain proficiency in further development of this technology

デジタルケーブルテレビシステムの高効率・高品質伝送技術の研究

電気通信大学201

An enhanced multicarrier modulation system for mobile communications

PhD ThesisThe recent revolution in mobile communications and the increased demand on more efficient transmission systems influence the research to enhance and invent new modulation techniques. Orthogonal frequency division multiplexing with offset quadrature amplitude modulation (OFDM/OQAM) is one of the multicarrier modulations techniques that overcomes some of the weaknesses of the conventional OFDM in term of bandwidth and power efficiencies. This thesis presents a novel multicarrier modulation scheme with improved performance in mobile communications context. Initially, the theoretical principles behind OFDM and OFDM/OQAM are discussed and the advantages of OFDM/OQAM over OFDM are highlighted. The time-frequency localization of pulse shapes is examined over different types of pulses. The effect of the localization and the pulse choice on OFDM/OQAM performance is demonstrated. The first contribution is introducing a new variant of multicarrier modulation system based on the integration of the Walsh-Hadamard transform with the OFDM/OQAM modulator. The full analytical transmission model of the system is derived over flat fading and frequency selective channels. Next, because of the critical requirement of low implementation complexity in mobile systems, a new fast algorithm transform is developed to reduce the implementation complexity of the system. The introduced fast algorithm has demonstrated a remarkable 60 percent decrease in the hardware requirement compared to the cascaded configuration. Although, the problem of high peak to average power ratio (PAPR) is one of the main drawbacks that associated with most multicarrier modulation techniques, the new system achieved lower values compared to the conventional systems. Subsequently, three new algorithms to reduce PAPR named Walsh overlapped selective mapping (WOSLM) for a high PAPR reduction, simplified selective mapping (SSLM) for a very low implementation complexity and Walsh partial transmit sequence (WPTS), are developed. Finally, in order to assess the reliability of the presented system in this thesis at imperfect environments, the performance of the system is investigated in the presence of high power amplifier, channel estimation errors, and carrier frequency offset (CFO). Two channel estimations algorithms named enhanced pair of pilots (EPOP) and averaged enhanced pair of pilots (AEPOP), and one CFO estimator technique called frequency domain (FD) CFO estimator, are suggested to provide reliable performance.Ministry of Higher Education and Scientific Research (MOHSR) of Ira

Joint bit allocation and precoding for filterbank transceivers in NOFDM systems

Recently, the non orthogonal frequency division multiplexing (NOFDM) systems have attracted increased interest. They have several advantages over traditional OFDM systems: higher bandwidth efficiency; reduced sensitivity to carrier frequency offsets, oscillator phase noise and narrowband interference; and reduced intersymbol/intercarrier interference (ISI/ICI). In particular, low ISI/ICI will be important for future systems where Doppler frequencies will be larger (equivalently, channel variations will be faster) due to higher carrier frequencies and higher mobile velocities. In the first part of this thesis the duality of multicarrier systems and Gabor frames is discussed and applied to the design of a generalized multicarrier system based on a filterbank structure. The efficient polyphase implementation is also discussed. In this thesis the channel capacity of a GMC systems is evaluated through the diagonalization of an equivalent matrix model where intersymbol and intercarrier interferences have been included. Exploiting the majorization theory, the mutual information can be represented as a Schur-concave function and it is maximized through a joint transceiver design adding a linear precoder at the transmitter and a LMMSE equalizer at the receiver. The capacity is derived by the eigenvalue decomposition of the global system matrix including the noise colored by the receiver filtering and employing a power allocation of the transmitted power according to the well-known water-filling solution. This thesis investigates also the behaviour of the NOFDM systems when a power and bit allocation algorithm (like the Campello one) is employed in order to satisfy a certain QoS constrain. A comparison of the performances with OFDM systems is included. Finally a simple application of the cognitive radio paradigm employing filterbankbased multicarrier systems is developed and some interesting results are showed