Real-Time QoS Routing Protocols in Wireless Multimedia Sensor Networks: Study and Analysis

Many routing protocols have been proposed for wireless sensor networks. These routing protocols are almost always based on energy efficiency. However, recent advances in complementary metal-oxide semiconductor (CMOS) cameras and small microphones have led to the development of Wireless Multimedia Sensor Networks (WMSN) as a class of wireless sensor networks which pose additional challenges. The transmission of imaging and video data needs routing protocols with both energy efficiency and Quality of Service (QoS) characteristics in order to guarantee the efficient use of the sensor nodes and effective access to the collected data. Also, with integration of real time applications in Wireless Senor Networks (WSNs), the use of QoS routing protocols is not only becoming a significant topic, but is also gaining the attention of researchers. In designing an efficient QoS routing protocol, the reliability and guarantee of end-to-end delay are critical events while conserving energy. Thus, considerable research has been focused on designing energy efficient and robust QoS routing protocols. In this paper, we present a state of the art research work based on real-time QoS routing protocols for WMSNs that have already been proposed. This paper categorizes the real-time QoS routing protocols into probabilistic and deterministic protocols. In addition, both categories are classified into soft and hard real time protocols by highlighting the QoS issues including the limitations and features of each protocol. Furthermore, we have compared the performance of mobility-aware query based real-time QoS routing protocols from each category using Network Simulator-2 (NS2). This paper also focuses on the design challenges and future research directions as well as highlights the characteristics of each QoS routing protocol.https://doi.org/10.3390/s15092220

Improving Resilience of Communication in Information Dissemination for Time-Critical Applications

Severe weather impacts life and in this dire condition, people rely on communication, to organize relief and stay in touch with their loved ones. In such situations, cellular network infrastructure\footnote{We refer to cellular network infrastructure as infrastructure for the entirety of this document} might be affected due to power outage, link failures, etc. This urges us to look at Ad-hoc mode of communication, to offload major traffic partially or fully from the infrastructure, depending on the status of it. We look into threefold approach, ranging from the case where the infrastructure is completely unavailable, to where it has been replaced by make shift low capacity mobile cellular base station. First, we look into communication without infrastructure and timely, dissemination of weather alerts specific to geographical areas. We look into the specific case of floods as they affect significant number of people. Due to the nature of the problem we can utilize the properties of Information Centric Networking (ICN) in this context, namely: i) Flexibility and high failure resistance: Any node in the network that has the information can satisfy the query ii) Robust: Only sensor and car need to communicate iii) Fine grained geo-location specific information dissemination. We analyze how message forwarding using ICN on top of Ad hoc network, approach compares to the one based on infrastructure, that is less resilient in the case of disaster. In addition, we compare the performance of different message forwarding strategies in VANETs (Vehicular Adhoc Networks) using ICN. Our results show that ICN strategy outperforms the infrastructure-based approach as it is 100 times faster for 63\% of total messages delivered. Then we look into the case where we have the cellular network infrastructure, but it is being pressured due to rapid increase in volume of network traffic (as seen during a major event) or it has been replaced by low capacity mobile tower. In this case we look at offloading as much traffic as possible from the infrastructure to device-to-device communication. However, the host-oriented model of the TCP/IP-based Internet poses challenges to this communication pattern. A scheme that uses an ICN model to fetch content from nearby peers, increases the resiliency of the network in cases of outages and disasters. We collected content popularity statistics from social media to create a content request pattern and evaluate our approach through the simulation of realistic urban scenarios. Additionally, we analyze the scenario of large crowds in sports venues. Our simulation results show that we can offload traffic from the backhaul network by up to 51.7\%, suggesting an advantageous path to support the surge in traffic while keeping complexity and cost for the network operator at manageable levels. Finally, we look at adaptive bit-rate streaming (ABR) streaming, which has contributed significantly to the reduction of video playout stalling, mainly in highly variable bandwidth conditions. ABR clients continue to suffer from the variation of bit rate qualities over the duration of a streaming session. Similar to stalling, these variations in bit rate quality have a negative impact on the users’ Quality of Experience (QoE). We use a trace from a large-scale CDN to show that such quality changes occur in a significant amount of streaming sessions and investigate an ABR video segment retransmission approach to reduce the number of such quality changes. As the new HTTP/2 standard is becoming increasingly popular, we also see an increase in the usage of HTTP/2 as an alternative protocol for the transmission of web traffic including video streaming. Using various network conditions, we conduct a systematic comparison of existing transport layer approaches for HTTP/2 that is best suited for ABR segment retransmissions. Since it is well known that both protocols provide a series of improvements over HTTP/1.1, we perform experiments both in controlled environments and over transcontinental links in the Internet and find that these benefits also “trickle up” into the application layer when it comes to ABR video streaming where HTTP/2 retransmissions can significantly improve the average quality bitrate while simultaneously minimizing bit rate variations over the duration of a streaming session. Taking inspiration from the first two approaches, we take into account the resiliency of a multi-path approach and further look at a multi-path and multi-stream approach to ABR streaming and demonstrate that losses on one path have very little impact on the other from the same multi-path connection and this increases throughput and resiliency of communication

A study of the applicability of software-defined networking in industrial networks

173 p.Las redes industriales interconectan sensores y actuadores para llevar a cabo funciones de monitorización, control y protección en diferentes entornos, tales como sistemas de transporte o sistemas de automatización industrial. Estos sistemas ciberfísicos generalmente están soportados por múltiples redes de datos, ya sean cableadas o inalámbricas, a las cuales demandan nuevas prestaciones, de forma que el control y gestión de tales redes deben estar acoplados a las condiciones del propio sistema industrial. De este modo, aparecen requisitos relacionados con la flexibilidad, mantenibilidad y adaptabilidad, al mismo tiempo que las restricciones de calidad de servicio no se vean afectadas. Sin embargo, las estrategias de control de red tradicionales generalmente no se adaptan eficientemente a entornos cada vez más dinámicos y heterogéneos.Tras definir un conjunto de requerimientos de red y analizar las limitaciones de las soluciones actuales, se deduce que un control provisto independientemente de los propios dispositivos de red añadiría flexibilidad a dichas redes. Por consiguiente, la presente tesis explora la aplicabilidad de las redes definidas por software (Software-Defined Networking, SDN) en sistemas de automatización industrial. Para llevar a cabo este enfoque, se ha tomado como caso de estudio las redes de automatización basadas en el estándar IEC 61850, el cual es ampliamente usado en el diseño de las redes de comunicaciones en sistemas de distribución de energía, tales como las subestaciones eléctricas. El estándar IEC 61850 define diferentes servicios y protocolos con altos requisitos en terminos de latencia y disponibilidad de la red, los cuales han de ser satisfechos mediante técnicas de ingeniería de tráfico. Como resultado, aprovechando la flexibilidad y programabilidad ofrecidas por las redes definidas por software, en esta tesis se propone una arquitectura de control basada en el protocolo OpenFlow que, incluyendo tecnologías de gestión y monitorización de red, permite establecer políticas de tráfico acorde a su prioridad y al estado de la red.Además, las subestaciones eléctricas son un ejemplo representativo de infraestructura crítica, que son aquellas en las que un fallo puede resultar en graves pérdidas económicas, daños físicos y materiales. De esta forma, tales sistemas deben ser extremadamente seguros y robustos, por lo que es conveniente la implementación de topologías redundantes que ofrezcan un tiempo de reacción ante fallos mínimo. Con tal objetivo, el estándar IEC 62439-3 define los protocolos Parallel Redundancy Protocol (PRP) y High-availability Seamless Redundancy (HSR), los cuales garantizan un tiempo de recuperación nulo en caso de fallo mediante la redundancia activa de datos en redes Ethernet. Sin embargo, la gestión de redes basadas en PRP y HSR es estática e inflexible, lo que, añadido a la reducción de ancho de banda debida la duplicación de datos, hace difícil un control eficiente de los recursos disponibles. En dicho sentido, esta tesis propone control de la redundancia basado en el paradigma SDN para un aprovechamiento eficiente de topologías malladas, al mismo tiempo que se garantiza la disponibilidad de las aplicaciones de control y monitorización. En particular, se discute cómo el protocolo OpenFlow permite a un controlador externo configurar múltiples caminos redundantes entre dispositivos con varias interfaces de red, así como en entornos inalámbricos. De esta forma, los servicios críticos pueden protegerse en situaciones de interferencia y movilidad.La evaluación de la idoneidad de las soluciones propuestas ha sido llevada a cabo, principalmente, mediante la emulación de diferentes topologías y tipos de tráfico. Igualmente, se ha estudiado analítica y experimentalmente cómo afecta a la latencia el poder reducir el número de saltos en las comunicaciones con respecto al uso de un árbol de expansión, así como balancear la carga en una red de nivel 2. Además, se ha realizado un análisis de la mejora de la eficiencia en el uso de los recursos de red y la robustez alcanzada con la combinación de los protocolos PRP y HSR con un control llevado a cabo mediante OpenFlow. Estos resultados muestran que el modelo SDN podría mejorar significativamente las prestaciones de una red industrial de misión crítica

Multi-objective performance optimization of a probabilistic similarity/dissimilarity-based broadcasting scheme for mobile ad hoc networks in disaster response scenarios

Communications among crewmembers in rescue teams and among victims are crucial to relief the consequences and damages of a disaster situation. A common communication system for establishing real time communications between the elements (victims, crewmem-bers, people living in the vicinity of the disaster scenario, among others) involved in a disaster scenario is required. Ad hoc networks have been envisioned for years as a possible solution. They allow users to establish decentralized communications quickly and using common devices like mobile phones. Broadcasting is the main mechanism used to dissemi-nate information in all-to-all fashion in ad hoc networks. The objective of this paper is to optimize a broadcasting scheme based on similari-ty/dissimilarity coefficient designed for disaster response scenarios through a multi-objective optimization problem in which several per-formance metrics such as reachability, number of retransmissions and delay are optimized simultaneously

Hybrid wireless broadband networks

A hybrid system is an integration of two or more different systems, particularly in this thesis referring to wireless broadband networks. However, to provide end-to-end quality of service (QoS) in a hybrid system is a challenging task due to different protocol in each system. In this thesis, we aim to improve the overall performance of hybrid networks in a disaster management by addressing the challenges as well as the problems in a homogeneous network. Such an approach allows more efficient multi-parameter optimization and significant improvements in the overall system performance. More specifically, we introduce two novel algorithms. The first is the novel end-to-end QoS algorithm for hybrid wireless broadband networks. We proposed the end-to-end QoS maps based on particular chosen parameters and analyse the simulation results. The QoS maps are applied to a few scenarios, and the performance evaluation of the constructed network is presented. Based on the results obtained by software simulation tools, the performance validation shows that the hybrid network has specific advantages and constraints in terms of number of users, preference, coverage and applications. The second algorithm presented is the novel in users’ application algorithm, the purpose of which is to optimize bandwidth for first responders applied in the PPDR project under grant agreement EU FP7 SEC PPDR-TC. This algorithm is responsible for incorporating more users and different levels of background load to a hybrid network. The proposed method analyses both positive and negative outcomes based on the results obtained. This algorithm has been presented in the PPDR project

Self-organizing Network Optimization via Placement of Additional Nodes

Das Hauptforschungsgebiet des Graduiertenkollegs "International Graduate School on Mobile Communication" (GS Mobicom) der Technischen Universität Ilmenau ist die Kommunikation in Katastrophenszenarien. Wegen eines Desasters oder einer Katastrophe können die terrestrischen Elementen der Infrastruktur eines Kommunikationsnetzwerks beschädigt oder komplett zerstört werden. Dennoch spielen verfügbare Kommunikationsnetze eine sehr wichtige Rolle während der Rettungsmaßnahmen, besonders für die Koordinierung der Rettungstruppen und für die Kommunikation zwischen ihren Mitgliedern. Ein solcher Service kann durch ein mobiles Ad-Hoc-Netzwerk (MANET) zur Verfügung gestellt werden. Ein typisches Problem der MANETs ist Netzwerkpartitionierung, welche zur Isolation von verschiedenen Knotengruppen führt. Eine mögliche Lösung dieses Problems ist die Positionierung von zusätzlichen Knoten, welche die Verbindung zwischen den isolierten Partitionen wiederherstellen können. Hauptziele dieser Arbeit sind die Recherche und die Entwicklung von Algorithmen und Methoden zur Positionierung der zusätzlichen Knoten. Der Fokus der Recherche liegt auf Untersuchung der verteilten Algorithmen zur Bestimmung der Positionen für die zusätzlichen Knoten. Die verteilten Algorithmen benutzen nur die Information, welche in einer lokalen Umgebung eines Knotens verfügbar ist, und dadurch entsteht ein selbstorganisierendes System. Jedoch wird das gesamte Netzwerk hier vor allem innerhalb eines ganz speziellen Szenarios - Katastrophenszenario - betrachtet. In einer solchen Situation kann die Information über die Topologie des zu reparierenden Netzwerks im Voraus erfasst werden und soll, natürlich, für die Wiederherstellung mitbenutzt werden. Dank der eventuell verfügbaren zusätzlichen Information können die Positionen für die zusätzlichen Knoten genauer ermittelt werden. Die Arbeit umfasst eine Beschreibung, Implementierungsdetails und eine Evaluierung eines selbstorganisierendes Systems, welche die Netzwerkwiederherstellung in beiden Szenarien ermöglicht.The main research area of the International Graduate School on Mobile Communication (GS Mobicom) at Ilmenau University of Technology is communication in disaster scenarios. Due to a disaster or an accident, the network infrastructure can be damaged or even completely destroyed. However, available communication networks play a vital role during the rescue activities especially for the coordination of the rescue teams and for the communication between their members. Such a communication service can be provided by a Mobile Ad-Hoc Network (MANET). One of the typical problems of a MANET is network partitioning, when separate groups of nodes become isolated from each other. One possible solution for this problem is the placement of additional nodes in order to reconstruct the communication links between isolated network partitions. The primary goal of this work is the research and development of algorithms and methods for the placement of additional nodes. The focus of this research lies on the investigation of distributed algorithms for the placement of additional nodes, which use only the information from the nodes’ local environment and thus form a self-organizing system. However, during the usage specifics of the system in a disaster scenario, global information about the topology of the network to be recovered can be known or collected in advance. In this case, it is of course reasonable to use this information in order to calculate the placement positions more precisely. The work provides the description, the implementation details and the evaluation of a self-organizing system which is able to recover from network partitioning in both situations

Survey of Inter-satellite Communication for Small Satellite Systems: Physical Layer to Network Layer View

Small satellite systems enable whole new class of missions for navigation, communications, remote sensing and scientific research for both civilian and military purposes. As individual spacecraft are limited by the size, mass and power constraints, mass-produced small satellites in large constellations or clusters could be useful in many science missions such as gravity mapping, tracking of forest fires, finding water resources, etc. Constellation of satellites provide improved spatial and temporal resolution of the target. Small satellite constellations contribute innovative applications by replacing a single asset with several very capable spacecraft which opens the door to new applications. With increasing levels of autonomy, there will be a need for remote communication networks to enable communication between spacecraft. These space based networks will need to configure and maintain dynamic routes, manage intermediate nodes, and reconfigure themselves to achieve mission objectives. Hence, inter-satellite communication is a key aspect when satellites fly in formation. In this paper, we present the various researches being conducted in the small satellite community for implementing inter-satellite communications based on the Open System Interconnection (OSI) model. This paper also reviews the various design parameters applicable to the first three layers of the OSI model, i.e., physical, data link and network layer. Based on the survey, we also present a comprehensive list of design parameters useful for achieving inter-satellite communications for multiple small satellite missions. Specific topics include proposed solutions for some of the challenges faced by small satellite systems, enabling operations using a network of small satellites, and some examples of small satellite missions involving formation flying aspects.Comment: 51 pages, 21 Figures, 11 Tables, accepted in IEEE Communications Surveys and Tutorial