1,994 research outputs found
Fault tolerance in WBAN applications
One of the most promising applications of IoT is Wireless Body Area Net-works (WBANs) in medical applications. They allow physiological signals monitoring of patients without the presence of nearby medical personnel. Furthermore, WBANs enable feedback action to be taken either periodically or event-based following the Networked Control Systems (NCSs) techniques. This thesis first presents the architecture of a fault tolerant WBAN. Sensors data are sent over two redundant paths to be processed, analyzed and monitored. The two main communication protocols utilized in this system are Low power Wi-Fi (IEEE 802.11n) and Long Term Evolution (LTE). Riverbed Modeler is used to study the systemĂąâŹâąs behavior. Simulation results are collected with 95% confidence analysis on 33 runs on different initial seeds. It is proven that the system is fully operational. It is then shown that the system can withstand interference and systemĂąâŹâąs performance is quantified. Results indicate that the system succeeds in meeting all required control criteria in the presence of two different interference models. The second contribution of this thesis is the design of an FPGA-based smart band for health monitoring applications in WBANs. This FPGA-based smart band has a softcore processor and its allocated SRAM block as well as auxiliary modules. A novel scheme for full initial configuration and Dynamic Partial Reconfiguration through the WLAN network is integrated into this design. Fault tolerance techniques are used to mitigate transient faults such as Single Event Upsets (SEUs) and Multiple Event Upsets (MEUs). The system is studied in a normal environment as well as in a harsh environment. System availability is then obtained using Markov Models and a case study is presented
Mobile sink based fault diagnosis scheme for wireless sensor networks
Network diagnosis in Wireless Sensor Networks (WSNs) is a difficult task due to their improvisational nature, invisibility of internal running status, and particularly since the network structure can frequently change due to link failure. To solve this problem, we propose a Mobile Sink (MS) based distributed fault diagnosis algorithm for WSNs. An MS, or mobile fault detector is usually a mobile robot or vehicle equipped with a wireless transceiver that performs the task of a mobile base station while also diagnosing the hardware and software status of deployed network sensors. Our MS mobile fault detector moves through the network area polling each static sensor node to diagnose the hardware and software status of nearby sensor nodes using only single hop communication. Therefore, the fault detection accuracy and functionality of the network is significantly increased. In order to maintain an excellent Quality of Service (QoS), we employ an optimal fault diagnosis tour planning algorithm. In addition to saving energy and time, the tour planning algorithm excludes faulty sensor nodes from the next diagnosis tour. We demonstrate the effectiveness of the proposed algorithms through simulation and real life experimental results
Review of selection criteria for sensor and actuator configurations suitable for internal combustion engines
This literature review considers the problem of finding a suitable configuration of sensors and actuators for the control of an internal combustion engine. It takes a look at the methods, algorithms, processes, metrics, applications, research groups and patents relevant for this topic. Several formal metric have been proposed, but practical use remains limited. Maximal information criteria are theoretically optimal for selecting sensors, but hard to apply to a system as complex and nonlinear as an engine. Thus, we reviewed methods applied to neighboring fields including nonlinear systems and non-minimal phase systems. Furthermore, the closed loop nature of control means that information is not the only consideration, and speed, stability and robustness have to be considered. The optimal use of sensor information also requires the use of models, observers, state estimators or virtual sensors, and practical acceptance of these remains limited. Simple control metrics such as conditioning number are popular, mostly because they need fewer assumptions than closed-loop metrics, which require a full plant, disturbance and goal model. Overall, no clear consensus can be found on the choice of metrics to define optimal control configurations, with physical measures, linear algebra metrics and modern control metrics all being used. Genetic algorithms and multi-criterial optimisation were identified as the most widely used methods for optimal sensor selection, although addressing the dimensionality and complexity of formulating the problem remains a challenge. This review does present a number of different successful approaches for specific applications domains, some of which may be applicable to diesel engines and other automotive applications. For a thorough treatment, non-linear dynamics and uncertainties need to be considered together, which requires sophisticated (non-Gaussian) stochastic models to establish the value of a control architecture
Machine Learning in Wireless Sensor Networks: Algorithms, Strategies, and Applications
Wireless sensor networks monitor dynamic environments that change rapidly
over time. This dynamic behavior is either caused by external factors or
initiated by the system designers themselves. To adapt to such conditions,
sensor networks often adopt machine learning techniques to eliminate the need
for unnecessary redesign. Machine learning also inspires many practical
solutions that maximize resource utilization and prolong the lifespan of the
network. In this paper, we present an extensive literature review over the
period 2002-2013 of machine learning methods that were used to address common
issues in wireless sensor networks (WSNs). The advantages and disadvantages of
each proposed algorithm are evaluated against the corresponding problem. We
also provide a comparative guide to aid WSN designers in developing suitable
machine learning solutions for their specific application challenges.Comment: Accepted for publication in IEEE Communications Surveys and Tutorial
Software Defined Networks based Smart Grid Communication: A Comprehensive Survey
The current power grid is no longer a feasible solution due to
ever-increasing user demand of electricity, old infrastructure, and reliability
issues and thus require transformation to a better grid a.k.a., smart grid
(SG). The key features that distinguish SG from the conventional electrical
power grid are its capability to perform two-way communication, demand side
management, and real time pricing. Despite all these advantages that SG will
bring, there are certain issues which are specific to SG communication system.
For instance, network management of current SG systems is complex, time
consuming, and done manually. Moreover, SG communication (SGC) system is built
on different vendor specific devices and protocols. Therefore, the current SG
systems are not protocol independent, thus leading to interoperability issue.
Software defined network (SDN) has been proposed to monitor and manage the
communication networks globally. This article serves as a comprehensive survey
on SDN-based SGC. In this article, we first discuss taxonomy of advantages of
SDNbased SGC.We then discuss SDN-based SGC architectures, along with case
studies. Our article provides an in-depth discussion on routing schemes for
SDN-based SGC. We also provide detailed survey of security and privacy schemes
applied to SDN-based SGC. We furthermore present challenges, open issues, and
future research directions related to SDN-based SGC.Comment: Accepte
Wireless body sensor networks for health-monitoring applications
This is an author-created, un-copyedited version of an article accepted for publication in
Physiological Measurement. The publisher is
not responsible for any errors or omissions in this version of the manuscript or any version
derived from it. The Version of Record is available online at http://dx.doi.org/10.1088/0967-3334/29/11/R01
- âŠ