Fault-tolerant formation driving mechanism designed for heterogeneous MAVs-UGVs groups

A fault-tolerant method for stabilization and navigation of 3D heterogeneous formations is proposed in this paper. The presented Model Predictive Control (MPC) based approach enables to deploy compact formations of closely cooperating autonomous aerial and ground robots in surveillance scenarios without the necessity of a precise external localization. Instead, the proposed method relies on a top-view visual relative localization provided by the micro aerial vehicles flying above the ground robots and on a simple yet stable visual based navigation using images from an onboard monocular camera. The MPC based schema together with a fault detection and recovery mechanism provide a robust solution applicable in complex environments with static and dynamic obstacles. The core of the proposed leader-follower based formation driving method consists in a representation of the entire 3D formation as a convex hull projected along a desired path that has to be followed by the group. Such an approach provides non-collision solution and respects requirements of the direct visibility between the team members. The uninterrupted visibility is crucial for the employed top-view localization and therefore for the stabilization of the group. The proposed formation driving method and the fault recovery mechanisms are verified by simulations and hardware experiments presented in the paper

A performance optimization algorithm for controller reconfiguration in fault tolerant distributed model predictive control

This paper presents a performance optimization algorithm for controller reconfiguration in fault tol-erant distributed model predictive control for large-scale systems. After the fault has been detectedand diagnosed, several controller reconfigurations are proposed as candidate corrective actions for faultcompensation. The solution of a set of constrained optimization problems with different actuator andsetpoint reconfigurations is derived by means of an original approach, exploiting the information onthe active constraints in the non-faulty subsystems. Thus, the global optimization problem is split intotwo optimization subproblems, which enable the online computational burden to be greatly reduced.Subsequently, the performances of different candidate controller reconfigurations are compared, andthe better performing one is selected and then implemented to compensate the fault effects. Efficacyof the proposed approach has been shown by applying it to the benzene alkylation process, which is abenchmark process in distributed model predictive control.Peer reviewe

Distributed adaptive fault-tolerant leader-following formation control of nonlinear uncertain second-order multi-agent systems

This paper presents a distributed integrated fault diagnosis and accommodation scheme for leader‐following formation control of a class of nonlinear uncertain second‐order multi‐agent systems. The fault model under consideration includes both process and actuator faults, which may evolve abruptly or incipiently. The time‐varying leader communicates with a small subset of follower agents, and each follower agent communicates to its directly connected neighbors through a bidirectional network with possibly asymmetric weights. A local fault diagnosis and accommodation component are designed for each agent in the distributed system, which consists of a fault detection and isolation module and a reconfigurable controller module comprised of a baseline controller and two adaptive fault‐tolerant controllers, activated after fault detection and after fault isolation, respectively. By using appropriately the designed Lyapunov functions, the closed‐loop stability and asymptotic convergence properties of the leader‐follower formation are rigorously established under different modes of the fault‐tolerant control system

Fault Diagnosis and Fault Tolerant Control of Wind Turbines: An Overview

Wind turbines are playing an increasingly important role in renewable power generation. Their complex and large-scale structure, however, and operation in remote locations with harsh environmental conditions and highly variable stochastic loads make fault occurrence inevitable. Early detection and location of faults are vital for maintaining a high degree of availability and reducing maintenance costs. Hence, the deployment of algorithms capable of continuously monitoring and diagnosing potential faults and mitigating their effects before they evolve into failures is crucial. Fault diagnosis and fault tolerant control designs have been the subject of intensive research in the past decades. Significant progress has been made and several methods and control algorithms have been proposed in the literature. This paper provides an overview of the most recent fault diagnosis and fault tolerant control techniques for wind turbines. Following a brief discussion of the typical faults, the most commonly used model-based, data-driven and signal-based approaches are discussed. Passive and active fault tolerant control approaches are also highlighted and relevant publications are discussed. Future development tendencies in fault diagnosis and fault tolerant control of wind turbines are also briefly stated. The paper is written in a tutorial manner to provide a comprehensive overview of this research topic

Neural Network Observer-Based Prescribed-Time Fault-Tolerant Tracking Control for Heterogeneous Multiagent Systems With a Leader of Unknown Disturbances

This study investigates the prescribed-time leader-follower formation strategy for heterogeneous multiagent sys-tems including unmanned aerial vehicles and unmanned ground vehicles under time-varying actuator faults and unknown dis-turbances based on adaptive neural network observers and backstepping method. Compared with the relevant works, the matching and mismatched disturbances of the leader agent are further taken into account in this study. A distributed fixed-time observer is developed for follower agents in order to timely obtain the position and velocity states of the leader, in which neural networks are employed to approximate the unknown disturbances. Furthermore, the actual sensor limitations make each follower only affected by local information and measurable local states. As a result, another fixed-time neural network observer is proposed to obtain the unknown states and the complex uncertainties. Then, a backstepping prescribed-time fault-tolerant formation controller is constructed by utilizing the estimations, which not only guarantees that the multiagent systems realize the desired formation configuration in a user-assignable finite time, but also ensures that the control action can be smooth everywhere. Finally, simulation examples are designed to testify the validity of the developed theoretical method

Decentralized and Fault-Tolerant Control of Power Systems with High Levels of Renewables

Inter-area oscillations have been identified as a major problem faced by most power systems and stability of these oscillations are of vital concern due to the potential for equipment damage and resulting restrictions on available transmission capacity. In recent years, wide-area measurement systems (WAMSs) have been deployed that allow inter-area modes to be observed and identified.Power grids consist of interconnections of many subsystems which may interact with their neighbors and include several sensors and actuator arrays. Modern grids are spatially distributed and centralized strategies are computationally expensive and might be impractical in terms of hardware limitations such as communication speed. Hence, decentralized control strategies are more desirable.Recently, the use of HVDC links, FACTS devices and renewable sources for damping of inter-area oscillations have been discussed in the literature. However, very few such systems have been deployed in practice partly due to the high level of robustness and reliability requirements for any closed loop power system controls. For instance, weather dependent sources such as distributed winds have the ability to provide services only within a narrow range and might not always be available due to weather, maintenance or communication failures.Given this background, the motivation of this work is to ensure power grid resiliency and improve overall grid reliability. The first consideration is the design of optimal decentralized controllers where decisions are based on a subset of total information. The second consideration is to design controllers that incorporate actuator limitations to guarantee the stability and performance of the system. The third consideration is to build robust controllers to ensure resiliency to different actuator failures and availabilities. The fourth consideration is to design distributed, fault-tolerant and cooperative controllers to address above issues at the same time. Finally, stability problem of these controllers with intermittent information transmission is investigated.To validate the feasibility and demonstrate the design principles, a set of comprehensive case studies are conducted based on different power system models including 39-bus New England system and modified Western Electricity Coordinating Council (WECC) system with different operating points, renewable penetration and failures

Robust de-centralized control and estimation for inter-connected systems

The thesis is concerned with the theoretical development of the control of inter-connected systems to achieve the whole overall stability and specific performance. A special included feature is the Fault-Tolerant Control (FTC) problem for the inter-connected system in terms of local subsystem actuator fault estimation. Hence, the thesis describes the main FTC challenges of distributed control of uncertain non-linear inter-connected systems. The basic principle adopted throughout the work is that the controller has two components, one involving the nominal control with unmatched components including uncertainties and disturbances. The second controller dealing with matched components including uncertainties and actuator faults.The main contributions of the thesis are summarised as follows:- The non-linear inter-connected systems are controlled by two controllers. The linear part via a linear matrix inequality (LMI) technique and the discontinuous part by using Integral Sliding Mode Control (ISMC) based on state feedback control.- The development of a new observer-based state estimate control strategy for non-linear inter-connected systems. The technique is applied either to every individual subsystem or to the whole as one shot system.- A new proposal of Adaptive Output Integral Sliding Mode Control (AOISMC) based only on output information plus static output feedback control is designed via an LMI formulation to control non-linear inter-connected systems. The new method is verified by application to a mathematical example representing an electrical power generator.- The development of a new method to design a dynamic control based on an LMI framework with Output Integral Sliding Mode Control (OISMC) to improve the stability and performance.- Using the above framework, making use of LMI tools and ISMC, a method of on-line actuator fault estimation has been proposed using the Proportional Multiple Integral Observer (PMIO) for fault estimation applicable to non-linear inter-connected systems

Fault Diagnosis and Fault-Tolerant Control of Unmanned Aerial Vehicles

With the increasing demand for unmanned aerial vehicles (UAVs) in both military and civilian applications, critical safety issues need to be specially considered in order to make better and wider use of them. UAVs are usually employed to work in hazardous and complex environments, which may seriously threaten the safety and reliability of UAVs. Therefore, the safety and reliability of UAVs are becoming imperative for development of advanced intelligent control systems. The key challenge now is the lack of fully autonomous and reliable control techniques in face of different operation conditions and sophisticated environments. Further development of unmanned aerial vehicle (UAV) control systems is required to be reliable in the presence of system component faults and to be insensitive to model uncertainties and external environmental disturbances. This thesis research aims to design and develop novel control schemes for UAVs with consideration of all the factors that may threaten their safety and reliability. A novel adaptive sliding mode control (SMC) strategy is proposed to accommodate model uncertainties and actuator faults for an unmanned quadrotor helicopter. Compared with the existing adaptive SMC strategies in the literature, the proposed adaptive scheme can tolerate larger actuator faults without stimulating control chattering due to the use of adaptation parameters in both continuous and discontinuous control parts. Furthermore, a fuzzy logic-based boundary layer and a nonlinear disturbance observer are synthesized to further improve the capability of the designed control scheme for tolerating model uncertainties, actuator faults, and unknown external disturbances while preventing overestimation of the adaptive control parameters and suppressing the control chattering effect. Then, a cost-effective fault estimation scheme with a parallel bank of recurrent neural networks (RNNs) is proposed to accurately estimate actuator fault magnitude and an active fault-tolerant control (FTC) framework is established for a closed-loop quadrotor helicopter system. Finally, a reconfigurable control allocation approach is combined with adaptive SMC to achieve the capability of tolerating complete actuator failures with application to a modified octorotor helicopter. The significance of this proposed control scheme is that the stability of the closed-loop system is theoretically guaranteed in the presence of both single and simultaneous actuator faults