Damage Tolerant Active Contro l: Concept and State of the Art

Damage tolerant active control is a new research area relating to fault tolerant control design applied to mechanical structures. It encompasses several techniques already used to design controllers and to detect and to diagnose faults, as well to monitor structural integrity. Brief reviews of the common intersections of these areas are presented, with the purpose to clarify its relations and also to justify the new controller design paradigm. Some examples help to better understand the role of the new area

Fault detection, identification and accommodation techniques for unmanned airborne vehicles

Unmanned Airborne Vehicles (UAV) are assuming prominent roles in both the commercial and military aerospace industries. The promise of reduced costs and reduced risk to human life is one of their major attractions, however these low-cost systems are yet to gain acceptance as a safe alternate to manned solutions. The absence of a thinking, observing, reacting and decision making pilot reduces the UAVs capability of managing adverse situations such as faults and failures. This paper presents a review of techniques that can be used to track the system health onboard a UAV. The review is based on a year long literature review aimed at identifying approaches suitable for combating the low reliability and high attrition rates of today’s UAV. This research primarily focuses on real-time, onboard implementations for generating accurate estimations of aircraft health for fault accommodation and mission management (change of mission objectives due to deterioration in aircraft health). The major task of such systems is the process of detection, identification and accommodation of faults and failures (FDIA). A number of approaches exist, of which model-based techniques show particular promise. Model-based approaches use analytical redundancy to generate residuals for the aircraft parameters that can be used to indicate the occurrence of a fault or failure. Actions such as switching between redundant components or modifying control laws can then be taken to accommodate the fault. The paper further describes recent work in evaluating neural-network approaches to sensor failure detection and identification (SFDI). The results of simulations with a variety of sensor failures, based on a Matlab non-linear aircraft model are presented and discussed. Suggestions for improvements are made based on the limitations of this neural network approach with the aim of including a broader range of failures, while still maintaining an accurate model in the presence of these failures

Fault-Tolerant Flight Control Using One Aerodynamic Control Surface

University of Minnesota Ph.D. dissertation. June 2018. Major: Aerospace Engineering and Mechanics. Advisor: Peter Seiler. 1 computer file (PDF); xiii, 291 pages.Small unmanned aircraft systems (UAS) have recently found increasing civilian and commercial applications. On-board fault management is one of several technical challenges facing their widespread use. The aerodynamic control surfaces of a fixed-wing UAS perform the safety-critical functions of stabilizing and controlling the aircraft. Failures in one or more of these surfaces, or the actuators controlling them, may be managed by repurposing the other control surfaces and/or propulsive devices. A natural question arises in this context: What is the minimum number of control surfaces required to adequately control a handicapped aircraft? The answer, in general, depends on the control surface layout of the aircraft under consideration. For some aircraft, however, the answer is one. If the UAS is equipped with only two control surfaces, such as the one considered in this thesis, then this limiting case is reached with a single control surface failure. This thesis demonstrates, via multiple flight tests, the autonomous landing of a UAS using only one aerodynamic control surface and the throttle. In seeking to arrive at these demonstrations, this thesis makes advances in the areas of model-based fault diagnosis and fault-tolerant control. Specifically, a new convex method is developed for synthesizing robust output estimators for continuous-time, uncertain, gridded, linear parameter-varying systems. This method is subsequently used to design the fault diagnosis algorithm. The detection time requirement of this algorithm is established using concepts from loss-of-control. The fault-tolerant controller is designed to operate the single control surface for lateral control and the throttle for total energy control. The fault diagnosis algorithm and the fault-tolerant controller are both designed using a model of the aircraft. This model is first developed using physics-based first-principles and then updated using system identification experiments. Since this aircraft does not have a rudder, the identification of the lateral-directional dynamics requires some novelty

Model Prediction-Based Approach to Fault Tolerant Control with Applications

Abstract— Fault-tolerant control (FTC) is an integral component in industrial processes as it enables the system to continue robust operation under some conditions. In this paper, an FTC scheme is proposed for interconnected systems within an integrated design framework to yield a timely monitoring and detection of fault and reconfiguring the controller according to those faults. The unscented Kalman filter (UKF)-based fault detection and diagnosis system is initially run on the main plant and parameter estimation is being done for the local faults. This critical information\ud is shared through information fusion to the main system where the whole system is being decentralized using the overlapping decomposition technique. Using this parameter estimates of decentralized subsystems, a model predictive control (MPC) adjusts its parameters according to the\ud fault scenarios thereby striving to maintain the stability of the system. Experimental results on interconnected continuous time stirred tank reactors (CSTR) with recycle and quadruple tank system indicate that the proposed method is capable to correctly identify various faults, and then controlling the system under some conditions

A survey on fractional order control techniques for unmanned aerial and ground vehicles

In recent years, numerous applications of science and engineering for modeling and control of unmanned aerial vehicles (UAVs) and unmanned ground vehicles (UGVs) systems based on fractional calculus have been realized. The extra fractional order derivative terms allow to optimizing the performance of the systems. The review presented in this paper focuses on the control problems of the UAVs and UGVs that have been addressed by the fractional order techniques over the last decade

Autonomous spacecraft maintenance study group

A plan to incorporate autonomous spacecraft maintenance (ASM) capabilities into Air Force spacecraft by 1989 is outlined. It includes the successful operation of the spacecraft without ground operator intervention for extended periods of time. Mechanisms, along with a fault tolerant data processing system (including a nonvolatile backup memory) and an autonomous navigation capability, are needed to replace the routine servicing that is presently performed by the ground system. The state of the art fault handling capabilities of various spacecraft and computers are described, and a set conceptual design requirements needed to achieve ASM is established. Implementations for near term technology development needed for an ASM proof of concept demonstration by 1985, and a research agenda addressing long range academic research for an advanced ASM system for 1990s are established

Study of fault tolerant software technology for dynamic systems

The major aim of this study is to investigate the feasibility of using systems-based failure detection isolation and compensation (FDIC) techniques in building fault-tolerant software and extending them, whenever possible, to the domain of software fault tolerance. First, it is shown that systems-based FDIC methods can be extended to develop software error detection techniques by using system models for software modules. In particular, it is demonstrated that systems-based FDIC techniques can yield consistency checks that are easier to implement than acceptance tests based on software specifications. Next, it is shown that systems-based failure compensation techniques can be generalized to the domain of software fault tolerance in developing software error recovery procedures. Finally, the feasibility of using fault-tolerant software in flight software is investigated. In particular, possible system and version instabilities, and functional performance degradation that may occur in N-Version programming applications to flight software are illustrated. Finally, a comparative analysis of N-Version and recovery block techniques in the context of generic blocks in flight software is presented

A Decoding Approach to Fault Tolerant Control of Linear Systems with Quantized Disturbance Input

The aim of this paper is to propose an alternative method to solve a Fault Tolerant Control problem. The model is a linear system affected by a disturbance term: this represents a large class of technological faulty processes. The goal is to make the system able to tolerate the undesired perturbation, i.e., to remove or at least reduce its negative effects; such a task is performed in three steps: the detection of the fault, its identification and the consequent process recovery. When the disturbance function is known to be \emph{quantized} over a finite number of levels, the detection can be successfully executed by a recursive \emph{decoding} algorithm, arising from Information and Coding Theory and suitably adapted to the control framework. This technique is analyzed and tested in a flight control issue; both theoretical considerations and simulations are reported