Multiobjective control of a four-link flexible manipulator: A robust H∞ approach

Copyright [2002] IEEE. This material is posted here with permission of the IEEE. Such permission of the IEEE does not in any way imply IEEE endorsement of any of Brunel University's products or services. Internal or personal use of this material is permitted. However, permission to reprint/republish this material for advertising or promotional purposes or for creating new collective works for resale or redistribution must be obtained from the IEEE by writing to [email protected]. By choosing to view this document, you agree to all provisions of the copyright laws protecting it.This paper presents an approach to robust H∞ control of a real multilink flexible manipulator via regional pole assignment. We first show that the manipulator system can be approximated by a linear continuous uncertain model with exogenous disturbance input. The uncertainty occurring in an operating space is assumed to be norm-bounded and enter into both the system and control matrices. Then, a multiobjective simultaneous realization problem is studied. The purpose of this problem is to design a state feedback controller such that, for all admissible parameter uncertainties, the closed-loop system simultaneously satisfies both the prespecified H∞ norm constraint on the transfer function from the disturbance input to the system output and the prespecified circular pole constraint on the closed-loop system matrix. An algebraic parameterized approach is developed to characterize the existence conditions as well as the analytical expression of the desired controllers. Third, by comparing with the traditional linear quadratic regulator control method in the sense of robustness and tracking precision, we provide both the simulation and experimental results to demonstrate the effectiveness and advantages of the proposed approach

Adaptive control of a manipulator with a flexible link

An adaptive controller for a manipulator with one rigid link and one flexible link is presented. The performance and robustness of the controller are demonstrated by numerical simulation results. In the simulations, the manipulator moves in a gravitational field and a finite element model represents the flexible link

High precision motion control of parallel robots with imperfections and manufacturing tolerances

This work attempts to achieve precise motion control using parallel robots with manufacturing tolerances and inaccuracies by migrating the measurements from their joint space to task space in order to decrease control system’s sensitivity to any kinematical uncertainty rather than calibrating the parallel plant. The problem of dynamical model uncertainties and its effect on the derivation of the control law is also addressed in this work through disturbance estimation and compensation. Eventually, both task space measurement and disturbance estimation are combined to formulate a control framework that is unsensitive to either kinematical and dynamical system uncertainties

System Identification and LMI Based Robust PID Control of a Two-Link Flexible Manipulator

This paper presents investigations into the development of a linear matrix inequalities (LMI) based robust PID control of a nonlinear Two-Link Flexible Manipulator (TLFM) incorporating payload. A set of linear models of a TLFM is obtained by using system identification method in which the linear model represents the operating ranges of the dynamic system. Thus, the LMI constraints permit to robustly guarantee a certain perturbation rejection level and a region of pole location.  To study the effectiveness of the controller, initially a PID control is developed for TLFM with varying payloads. The performances of the controllers are assessed in terms of the input tracking controller capability of the system as compared to the response with PID control. Moreover, the robustness of the LMI based robust PID control schemes is discussed. Finally, a comparative assessment of the control strategies is presented

Control of flexible joint robotic manipulator using tuning functions design

The goal of this thesis is to design the controller for a single arm manipulator having a flexible joint for the tracking problem in two different cases. A controller is designed for a deterministic case wherein the plant parameters are assumed to be known while another is designed for an adaptive case where all the plant parameters are assumed to be unknown. In general the tracking problem is; given a smooth reference trajectory, the end effector has to track the reference while maintaining the stability. It is assumed that only the output of the manipulator, which is the link angle, is available for measurement. Also without loss of generality, the fast dynamics, that is the dynamics of the driver side of the system are neglected for the sake of simplicity; In the first case, the design procedure adopted is called observer backstepping. Since the states of the system are unavailable for measurement, an observer is designed that estimates the system states. These estimates are fed to the controller which in turn produces the control input to the system; The second case employs a design procedure called tuning functions design. In this case, since the plant parameters are unknown, the observer designed in case one cannot be used for determining the state estimates. For this purpose, parameter update laws and filters are designed for estimation of plant parameters. The filters employed are k-filters. The k-filters and the parameter update laws are given as input to the controller, which generates the control input to the system; For both cases, the mathematical models are simulated using Matlab/Simulink, and the results are verified

Haptic identification by ELM-controlled uncertain manipulator

This paper presents an extreme learning machine (ELM) based control scheme for uncertain robot manipulators to perform haptic identification. ELM is used to compensate for the unknown nonlinearity in the manipulator dynamics. The ELM enhanced controller ensures that the closed-loop controlled manipulator follows a specified reference model, in which the reference point as well as the feedforward force is adjusted after each trial for haptic identification of geometry and stiffness of an unknown object. A neural learning law is designed to ensure finite-time convergence of the neural weight learning, such that exact matching with the reference model can be achieved after the initial iteration. The usefulness of the proposed method is tested and demonstrated by extensive simulation studies. Index Terms—Extreme learning machine; haptic identification; adaptive control; robot manipulator