Blind adaptive equalization for QAM signals: New algorithms and FPGA implementation.

Adaptive equalizers remove signal distortion attributed to intersymbol interference in band-limited channels. The tap coefficients of adaptive equalizers are time-varying and can be adapted using several methods. When these do not include the transmission of a training sequence, it is referred to as blind equalization. The radius-adjusted approach is a method to achieve blind equalizer tap adaptation based on the equalizer output radius for quadrature amplitude modulation (QAM) signals. Static circular contours are defined around an estimated symbol in a QAM constellation, which create regions that correspond to fixed step sizes and weighting factors. The equalizer tap adjustment consists of a linearly weighted sum of adaptation criteria that is scaled by a variable step size. This approach is the basis of two new algorithms: the radius-adjusted modified multitmodulus algorithm (RMMA) and the radius-adjusted multimodulus decision-directed algorithm (RMDA). An extension of the radius-adjusted approach is the selective update method, which is a computationally-efficient method for equalization. The selective update method employs a stop-and-go strategy based on the equalizer output radius to selectively update the equalizer tap coefficients, thereby, reducing the number of computations in steady-state operation. (Abstract shortened by UMI.) Source: Masters Abstracts International, Volume: 45-01, page: 0401. Thesis (M.A.Sc.)--University of Windsor (Canada), 2006

Developing coherent optical wavelength conversion systems for reconfigurable photonic networks

In future optical networks that employ wavelength division multiplexing (WDM), the use of optical switching technologies on a burst or packet level, combined with advanced modulation formats would achieve greater spectral efficiency and utilize the existing bandwidth more efficiently. All-optical wavelength converters are expected to be one of the key components in these broadband networks. They can be used at the network nodes to avoid contention and to dynamically allocate wavelengths to ensure optimum use of fiber bandwidth. In this work, a reconfigurable wavelength converter comprising of a Semiconductor Optical Amplifier (SOA) as the nonlinear element and a fast-switching sampled grating distributed Bragg reflector (SG-DBR) tunable laser as one of the pumps is developed. The wavelength conversion of 12.5-Gbaud quadrature phase shift keying (QPSK) and Pol-Mul QPSK signals with switching time of tens of nanoseconds is experimentally achieved. Although the tunable DBR lasers can achieve ns tuning time, they present relatively large phase noise. The phase noise transfer from the pump to the converted signal can have a deleterious effect on signal quality and cause a performance penalty with phase modulated signals. To overcome the phase noise transfer issue, a wavelength converter using tunable dual-correlated pumps provided by the combination of a single-section quantum dash passively mode-locked laser (QD-PMLL) and a programmable tunable optical filter is designed and the wavelength conversion of QPSK and 16-quadrature amplitude modulation (16-QAM) signals at 12.5 GBaud is experimentally investigated. Nonlinear distortion of the wavelength converted signal caused by gain saturation effects in the SOA can significantly degrade the signal quality and cause difficulties for the practical wavelength conversion of sig nal data with advanced modulation formats. In this work, the machine learning clustering based nonlinearity compensation method is proposed to improve the tolerance to nonlinear distortion in an SOA based wavelength conversion system with 16 QAM and 64 QAM signals

Advanced Digital Signal Processing Techniques for High-Speed Optical Links

L'abstract è presente nell'allegato / the abstract is in the attachmen

Optics for AI and AI for Optics

Artificial intelligence is deeply involved in our daily lives via reinforcing the digital transformation of modern economies and infrastructure. It relies on powerful computing clusters, which face bottlenecks of power consumption for both data transmission and intensive computing. Meanwhile, optics (especially optical communications, which underpin today’s telecommunications) is penetrating short-reach connections down to the chip level, thus meeting with AI technology and creating numerous opportunities. This book is about the marriage of optics and AI and how each part can benefit from the other. Optics facilitates on-chip neural networks based on fast optical computing and energy-efficient interconnects and communications. On the other hand, AI enables efficient tools to address the challenges of today’s optical communication networks, which behave in an increasingly complex manner. The book collects contributions from pioneering researchers from both academy and industry to discuss the challenges and solutions in each of the respective fields

EFFICIENT FAST BLIND EQUALIZATION WITH TWO-STAGE SINGLE/MULTILEVEL MODULUS AND DD ALGORITHM FOR 64/256/1024QAM WIRED CABLE COMMUNICATIONS

In this paper, an efficient blind equalization with two-stage single/multilevel modulus and decision directed (DD) least mean square (LMS)-like algorithm is proposed for high-order QAM (64/256/1024QAM) cable modem systems. In wire-lined cable systems, it seems that the cable channel may display a nearly invariant mufti-path effect over a considerable time. and then the blind equalizer can have the capability to recover the received high-order QAM symbols on wired cables. The proposed blind equalization algorithm applies a two-stage convergence scheme, which results Iron the multi-modulus algorithm (MMA). sometimes called the modified constant modulus algorithm (MCMA). and the DD LMS-like method. In the first equalization stage, the joint MMA and DD LMS-like methods are applied for the purpose of fast convergence. When the convergence process reaches an acceptably steady condition. the convergence detector changes the process into the second stage. In the second equalization stage, the enhanced DD LMS-like method with the generalized multi-modulus is applied to reduce the mean square error (MSE) of equalizations further. For high-order QAM cable systems, the proposed method performs faster than the previous well-known blind methods do. Simultaneously,. the proposed algorithm also provides less MSE and lower symbol error rate (SER) than the other blind methods do at the same signal-to-noise ratio (SNR)

Novel Estimation and Detection Techniques for 5G Networks

The thesis presents several detection and estimation techniques that can be incorporated into the fifth-generation (5G) networks. First, the thesis presents a novel system for orthogonal frequency division multiplexing (OFDM) to estimate the channel blindly. The system is based on modulating particular pairs of subcarriers using amplitude shift keying (ASK) and phase-shift keying (PSK) adjacent in the frequency domain, which enables the realization of a decision-directed (DD) one-shot blind channel estimator (OSBCE). The performance of the proposed estimator is evaluated in terms of the mean squared error (MSE), where an accurate analytical expression is derived and verified using Monte Carlo simulation under various channel conditions. The system has also extended to exploits the channel correlation over consecutive OFDM symbols to estimate the channel parameters blindly. Furthermore, a reliable and accurate approach has been introduced to evaluate the spectral efficiency of various communications systems. The metric takes into consideration the system dynamics, QoS requirements, and design constraints. Next, a novel efficient receiver design for wireless communication systems that incorporate OFDM transmission has been proposed. The proposed receiver does not require channel estimation or equalization to perform coherent data detection. Instead, channel estimation, equalization, and data detection are combined into a single operation, and hence, the detector performs a direct data detector (D3). The performance of the proposed D3 is thoroughly analyzed theoretically in terms of bit error rate (BER), where closed-form accurate approximations are derived for several cases of interest, and validated by Monte Carlo simulations. The computational complexity of D3 depends on the length of the sequence to be detected. Nevertheless, a significant complexity reduction can be achieved using the Viterbi algorithm (VA). Finally, the thesis proposes a low-complexity algorithm for detecting anomalies in industrial steelmaking furnaces operation. The algorithm utilizes the vibration measurements collected from several built-in sensors to compute the temporal correlation using the autocorrelation function (ACF). Furthermore, the proposed model parameters are tuned by solving multi-objective optimization using a genetic algorithm (GA). The proposed algorithm is tested using a practical dataset provided by an industrial steelmaking plant

Digital Linearization of High Capacity and Spectrally Efficient Direct Detection Optical Transceivers

Metropolitan area networks are experiencing unprecedented traffic growth. The provision of information and entertainment supported by cloud services, broadband video and mobile technologies such as long-term evolution (LTE) and 5G are creating a rapidly increasing demand for bandwidth. Although wavelength division multiplexing (WDM) architectures have been introduced into metro transport networks to provide significant savings over single-channel systems, to cope with the ever-increasing traffic growth, it is urgently required to deploy higher data rates (100 Gb/s and beyond) for each WDM channel. In comparison to dual-polarization digital coherent transceivers, single-polarization and single photodiode-based direct-detection (DD) transceivers may be favourable for metropolitan, inter-data centre and access applications due to their use of a simple and low-cost optical hardware structure. Single sideband (SSB) quadrature amplitude modulation (QAM) subcarrier modulation (SCM) is a promising signal format to achieve high information spectral density (ISD). However, due to the nonlinear effect termed signal-signal beat interference (SSBI) caused by the square-law detection, the performance of such SSB SCM DD systems is severely degraded. Therefore, it is essential to develop effective and low-complexity linearization techniques to eliminate the SSBI penalty and improve the performance of such transceivers. Extensive studies on SSB SCM DD transceivers employing a number of novel digital linearization techniques to support high capacity (≥ 100 Gb/s per channel) and spectrally-efficient (net ISD > 2 b/s/Hz) WDM transmission covering metropolitan reach scenarios (up to 240 km) are described in detail in this thesis. Digital modulation formats that can be used in DD links and the corresponding transceiver configurations are firstly reviewed, from which the SSB SCM signalling format is identified as the most promising format to achieve high data rates and ISDs. Following this, technical details of the digital linearization approaches (iterative SSBI cancellation, single-stage linearization filter and simplified non-iterative SSBI cancellation, two-stage linearization filter, Kramers-Kronig scheme) considered in the thesis are presented. Their compensation performance in a dispersion pre-compensated (Tx-EDC) 112 Gb/s per channel 35 GHz-spaced WDM SSB 16-QAM Nyquist-SCM DD system transmitting over up to 240 km standard single-mode fibre (SSMF) is assessed. Net ISDs of up to 3.18 b/s/Hz are achieved. Moreover, we also show that, with the use of effective digital linearization techniques, further simplification of the DD transceivers can be realized by moving electronic dispersion compensation from the transmitter to the receiver without sacrificing performance. The optical ISD limit of SSB SCM DD system finally explored through experiments with higher-order modulation formats combined with effective digital linearization techniques. 168 Gb/s per channel WDM 64-QAM signals were successfully transmitted over 80 km, achieving a record net optical ISD of 4.54 b/s/Hz. Finally, areas for further research are identified