Regulatori struje aktivnih filtara snage za poboljšanje kvalitete snage: Tehnička analiza

Non-linear load deteriorates the quality of current waveforms at the point of common coupling of various consumers. Active power filter (APFs) is used to mitigate the most concern harmonic pollution in an electrical network. The controller part is the nucleus of an active power filter configuration. Active power filter performance is affected significantly by the selection of current control techniques. The active filter and its current control must have the capability to track sudden slope variations in the current reference to compensate the distorted current drawn by the voltage source inverter. Therefore, the choice and implementation of the current regulator is more important for the achievement of a satisfactory performance level. In this survey, technical reviews of various types of controllers covering a wide range have been presented. This work also reveals the advantages and disadvantages of the practiced control strategies. The effectiveness of the study will help the researchers to choose the proper control methods for various applicationsof active power filter.Nelinearni tereti pogoršavaju kvalitetu strujnih valova u točki u kojoj se spaja više potrošača. Aktivni filtar snage se koristi za ublažavanje najvažnijeg harmoničkog onečišćenja strujne mreže. Jezgra aktivnog filtra snage je regulator. Na performanse aktivnog filtra snage značajno utječe odabir upravljačke tehnike. Aktivni filtar i njegova tehnika upravljanja strujom moraju imati mogućnost pratiti nagle skokove u referentnoj vrijednosti struje kako bi mogli kompenzirati izobličenja struje koju vuče inverter naponskog izvora. Zato su izbor i implementacija regulatora struje iznimno važni za postizanje zadovoljavajuće razine performansi. U ovom pregledu su predstavljene tehničke recenzije koje pokrivaju širok raspon regulatora. Ovaj rad također otkriva prednosti i mane korištenih strategija upravljanja. Efektivnost ovog pregleda pomoći će istraživačima da izaberu ispravnu metodu upravljanja za različite aplikacije aktivnog filtra snage

Regulatori struje aktivnih filtara snage za poboljšanje kvalitete snage: Tehnička analiza

Non-linear load deteriorates the quality of current waveforms at the point of common coupling of various consumers. Active power filter (APFs) is used to mitigate the most concern harmonic pollution in an electrical network. The controller part is the nucleus of an active power filter configuration. Active power filter performance is affected significantly by the selection of current control techniques. The active filter and its current control must have the capability to track sudden slope variations in the current reference to compensate the distorted current drawn by the voltage source inverter. Therefore, the choice and implementation of the current regulator is more important for the achievement of a satisfactory performance level. In this survey, technical reviews of various types of controllers covering a wide range have been presented. This work also reveals the advantages and disadvantages of the practiced control strategies. The effectiveness of the study will help the researchers to choose the proper control methods for various applicationsof active power filter.Nelinearni tereti pogoršavaju kvalitetu strujnih valova u točki u kojoj se spaja više potrošača. Aktivni filtar snage se koristi za ublažavanje najvažnijeg harmoničkog onečišćenja strujne mreže. Jezgra aktivnog filtra snage je regulator. Na performanse aktivnog filtra snage značajno utječe odabir upravljačke tehnike. Aktivni filtar i njegova tehnika upravljanja strujom moraju imati mogućnost pratiti nagle skokove u referentnoj vrijednosti struje kako bi mogli kompenzirati izobličenja struje koju vuče inverter naponskog izvora. Zato su izbor i implementacija regulatora struje iznimno važni za postizanje zadovoljavajuće razine performansi. U ovom pregledu su predstavljene tehničke recenzije koje pokrivaju širok raspon regulatora. Ovaj rad također otkriva prednosti i mane korištenih strategija upravljanja. Efektivnost ovog pregleda pomoći će istraživačima da izaberu ispravnu metodu upravljanja za različite aplikacije aktivnog filtra snage

A Real-time Nonlinear Model Predictive Controller for Yaw Motion Optimization of Distributed Drive Electric Vehicles

This paper proposes a real-time nonlinear model predictive control (NMPC) strategy for direct yaw moment control (DYC) of distributed drive electric vehicles (DDEVs). The NMPC strategy is based on a control-oriented model built by integrating a single track vehicle model with the Magic Formula (MF) tire model. To mitigate the NMPC computational cost, the continuation/generalized minimal residual (C/GMRES) algorithm is employed and modified for real-time optimization. Since the traditional C/GMRES algorithm cannot directly solve the inequality constraint problem, the external penalty method is introduced to transform inequality constraints into an equivalently unconstrained optimization problem. Based on the Pontryagin’s minimum principle (PMP), the existence and uniqueness for solution of the proposed C/GMRES algorithm are proven. Additionally, to achieve fast initialization in C/GMRES algorithm, the varying predictive duration is adopted so that the analytic expressions of optimally initial solutions in C/GMRES algorithm can be derived and gained. A Karush-Kuhn-Tucker (KKT) condition based control allocation method distributes the desired traction and yaw moment among four independent motors. Numerical simulations are carried out by combining CarSim and Matlab/Simulink to evaluate the effectiveness of the proposed strategy. Results demonstrate that the real-time NMPC strategy can achieve superior vehicle stability performance, guarantee the given safety constraints, and significantly reduce the computational efforts

Design of a Predictive PID Controller using Particle Swarm Optimization

The proportional-integral-derivative (PID) controller is widely used in various industrial applications such as process control, motor drives, magnetic and optical memory, automotive, flight control and instrumentation. PID tuning refers to the generation of PID parameters (Kp, Ki, Kd) to obtain the optimum fitness value for any system. The determination of the PID parameters is essential for any system that relies on it to function in a stable mode. This paper proposes a method in designing a predictive PID controller system using particle swarm optimization (PSO) algorithm for direct current (DC) motor application. Extensive numerical simulations have been done using the Mathwork’s Matlab simulation environment. In order to gain full benefits from the PSO algorithm, the PSO parameters such as inertia weight, iteration number, acceleration constant and particle number need to be carefully adjusted and determined. Therefore, the first investigation of this study is to present a comparative analysis between two important PSO parameters; inertia weight and number of iteration, to assist the predictive PID controller design. Simulation results show that inertia weight of 0.9 and iteration number 100 provide a good fitness achievement with low overshoot and fast rise and settling time. Next, a comparison between the performance of the DC motor with PID-PSO, with PID of gain 1, and without PID were also discussed. From the analysis, it can be concluded that by tuning the PID parameters using PSO method, the best gain in performance may be found. Finally, when comparing between the PID-PSO and its counterpart, the PI-PSO, the PID-PSO controller gives better performance in terms of robustness, low overshoot (0.005%), low minimum rise time (0.2806 seconds) and low settling time (0.4326 seconds)

Nonlinear predictive control on a heterogeneous computing platform

Nonlinear Model Predictive Control (NMPC) is an advanced control technique that often relies on computationally demanding optimization and integration algorithms. This paper proposes and investigates a heterogeneous hardware implementation of an NMPC controller based on an interior point algorithm. The proposed implementation provides flexibility of splitting the workload between a general-purpose CPU with a fixed architecture and a field-programmable gate array (FPGA) to trade off contradicting design objectives, namely performance and computational resource usage. A new way of exploiting the structure of the Karush-Kuhn-Tucker (KKT) matrix yields significant memory savings, which is crucial for reconfigurable hardware. For the considered case study, a 10x memory savings compared to existing approaches and a 10x speedup over a software implementation are reported. The proposed implementation can be tested from Matlab using a new release of the Protoip software tool, which is another contribution of the paper. Protoip abstracts many low-level details of heterogeneous hardware programming and allows quick prototyping and processor-in-the-loop verification of heterogeneous hardware implementations

Automated optimization of reconfigurable designs

Currently, the optimization of reconfigurable design parameters is typically done manually and often involves substantial amount effort. The main focus of this thesis is to reduce this effort. The designer can focus on the implementation and design correctness, leaving the tools to carry out optimization. To address this, this thesis makes three main contributions. First, we present initial investigation of reconfigurable design optimization with the Machine Learning Optimizer (MLO) algorithm. The algorithm is based on surrogate model technology and particle swarm optimization. By using surrogate models the long hardware generation time is mitigated and automatic optimization is possible. For the first time, to the best of our knowledge, we show how those models can both predict when hardware generation will fail and how well will the design perform. Second, we introduce a new algorithm called Automatic Reconfigurable Design Efficient Global Optimization (ARDEGO), which is based on the Efficient Global Optimization (EGO) algorithm. Compared to MLO, it supports parallelism and uses a simpler optimization loop. As the ARDEGO algorithm uses multiple optimization compute nodes, its optimization speed is greatly improved relative to MLO. Hardware generation time is random in nature, two similar configurations can take vastly different amount of time to generate making parallelization complicated. The novelty is efficient use of the optimization compute nodes achieved through extension of the asynchronous parallel EGO algorithm to constrained problems. Third, we show how results of design synthesis and benchmarking can be reused when a design is ported to a different platform or when its code is revised. This is achieved through the new Auto-Transfer algorithm. A methodology to make the best use of available synthesis and benchmarking results is a novel contribution to design automation of reconfigurable systems.Open Acces

A survey on fractional order control techniques for unmanned aerial and ground vehicles

In recent years, numerous applications of science and engineering for modeling and control of unmanned aerial vehicles (UAVs) and unmanned ground vehicles (UGVs) systems based on fractional calculus have been realized. The extra fractional order derivative terms allow to optimizing the performance of the systems. The review presented in this paper focuses on the control problems of the UAVs and UGVs that have been addressed by the fractional order techniques over the last decade

Applications of Power Electronics

Power electronics technology is still an emerging technology, and it has found its way into many applications, from renewable energy generation (i.e., wind power and solar power) to electrical vehicles (EVs), biomedical devices, and small appliances, such as laptop chargers. In the near future, electrical energy will be provided and handled by power electronics and consumed through power electronics; this not only will intensify the role of power electronics technology in power conversion processes, but also implies that power systems are undergoing a paradigm shift, from centralized distribution to distributed generation. Today, more than 1000 GW of renewable energy generation sources (photovoltaic (PV) and wind) have been installed, all of which are handled by power electronics technology. The main aim of this book is to highlight and address recent breakthroughs in the range of emerging applications in power electronics and in harmonic and electromagnetic interference (EMI) issues at device and system levels as discussed in ?robust and reliable power electronics technologies, including fault prognosis and diagnosis technique stability of grid-connected converters and ?smart control of power electronics in devices, microgrids, and at system levels