High-Capacity Clos-Network Switch for Data Center Networks

Scaling-up Data Center Networks (DCNs) should be done at the network level as well as the switching elements level. The glaring reason for this, is that switches/routers deployed in the DCN can bound the network capacity and affect its performance if improperly chosen. Many multistage switching architectures have been proposed to fit for the next-generation networking needs. However all of them are either performance limited or too complex to be implemented. Targeting scalability and performance, we propose the design of a large-capacity switch in which we affiliate a multistage design with a Networks-on- Chip (NoC) design. The proposal falls into the category of buffered multistage switches. Still, it has a different architectural aspect and scheduling process. Dissimilar to common point-to-point crossbars, NoCs used at the heart of the three-stage Clos-network allow multiple packets simultaneously in the modules where they can be adaptively transported using a pipelined scheduling scheme. Our simulations show that the switch scales well with the load and size variation. It outperforms a variety of architectures under a range of traffic arrivals

A survey of system level power management schemes in the dark-silicon era for many-core architectures

Power consumption in Complementary Metal Oxide Semiconductor (CMOS) technology has escalated to a point that only a fractional part of many-core chips can be powered-on at a time. Fortunately, this fraction can be increased at the expense of performance through the dark-silicon solution. However, with many-core integration set to be heading towards its thousands, power consumption and temperature increases per time, meaning the number of active nodes must be reduced drastically. Therefore, optimized techniques are demanded for continuous advancement in technology. Existing efforts try to overcome this challenge by activating nodes from different parts of the chip at the expense of communication latency. Other efforts on the other hand employ run-time power management techniques to manage the power performance of the cores trading-off performance for power. We found out that, for a significant amount of power to saved and high temperature to be avoided, focus should be on reducing the power consumption of all the on-chip components. Especially, the memory hierarchy and the interconnect. Power consumption can be minimized by, reducing the size of high leakage power dissipating elements, turning-off idle resources and integrating power saving materials

Minimization of Latency and Power for Network-on-Chip

Network-on-chip (NoC) has emerged as a imperative aspect that determines the performance and power consumption of many-core systems. This paper proposes a combination scheme for NoCs, which aims at gaining low latency and low power consumption. In the presented combination scheme, a peculiar switching mechanism, called virtual circuit switching, is proposed to interweave with circuit switching and packet switching. Flits traveling in virtual circuit switching can pass through the router with only one stage. In addition, multiple virtual circuit-switched (VCS) connections are granted to share a common physical channel. Moreover, a path allocation algorithm is used in this paper to determine VCS connections and circuit-switched connections on a mesh-connected NoC, such that both communication latency and power are optimized. DOI: 10.17762/ijritcc2321-8169.15022

SCORPIO: A 36-Core Research Chip Demonstrating Snoopy Coherence on a Scalable Mesh NoC with In-Network Ordering

URL to conference programIn the many-core era, scalable coherence and on-chip interconnects are crucial for shared memory processors. While snoopy coherence is common in small multicore systems, directory-based coherence is the de facto choice for scalability to many cores, as snoopy relies on ordered interconnects which do not scale. However, directory-based coherence does not scale beyond tens of cores due to excessive directory area overhead or inaccurate sharer tracking. Prior techniques supporting ordering on arbitrary unordered networks are impractical for full multicore chip designs. We present SCORPIO, an ordered mesh Network-on-Chip(NoC) architecture with a separate fixed-latency, bufferless network to achieve distributed global ordering. Message delivery is decoupled from the ordering, allowing messages to arrive in any order and at any time, and still be correctly ordered. The architecture is designed to plug-and-play with existing multicore IP and with practicality, timing, area, and power as top concerns. Full-system 36 and 64-core simulations on SPLASH-2 and PARSEC benchmarks show an average application run time reduction of 24.1% and 12.9%, in comparison to distributed directory and AMD HyperTransport coherence protocols, respectively. The SCORPIO architecture is incorporated in an 11 mm-by- 13 mm chip prototype, fabricated in IBM 45nm SOI technology, comprising 36 Freescale e200 Power Architecture TM cores with private L1 and L2 caches interfacing with the NoC via ARM AMBA, along with two Cadence on-chip DDR2 controllers. The chip prototype achieves a post synthesis operating frequency of 1 GHz (833 MHz post-layout) with an estimated power of 28.8 W (768 mW per tile), while the network consumes only 10% of tile area and 19 % of tile power.United States. Defense Advanced Research Projects Agency (DARPA UHPC grant at MIT (Angstrom))Center for Future Architectures ResearchMicroelectronics Advanced Research Corporation (MARCO)Semiconductor Research Corporatio

SPARTA: High-Level Synthesis of Parallel Multi-Threaded Accelerators

This paper presents a methodology for the Synthesis of PARallel multi-Threaded Accelerators (SPARTA) from OpenMP annotated C/C++ specifications. SPARTA extends an open-source HLS tool, enabling the generation of accelerators that provide latency tolerance for irregular memory accesses through multithreading, support fine-grained memory-level parallelism through a hot-potato deflection-based network-on-chip (NoC), support synchronization constructs, and can instantiate memory-side caches. Our approach is based on a custom runtime OpenMP library, providing flexibility and extensibility. Experimental results show high scalability when synthesizing irregular graph kernels. The accelerators generated with our approach are, on average, 2.29x faster than state-of-the-art HLS methodologies

Dual Data Rate Network-on-Chip Architectures

Networks-on-Chip (NoCs) are becoming increasing important for the performance of modern multi-core systems-on-chip. The performance of current NoCs is limited, among others, by two factors: their limited clock frequency and long router pipeline. The clock frequency of a network defines the limits of its saturation throughput. However, for high throughput routers, clock is constrained by the control logic (for virtual channel and switch allocation) whereas the datapath (crossbar switch and links) possesses significant slack. This slack in the datapath wastes network throughput potential. Secondly, routers require flits to go through a large number of pipeline stages increasing packet latency at low traffic loads. These stages include router resource allocation, switch traversal (ST) and link traversal (LT). The allocation stages are used to manage contention among flits attempting to simultaneously access switch and links, and the ST stage is needed to change the routing dimension. In some cases, these stages are not needed and then requiring flits to go through them increases packet latency. The aim of this thesis is to improve NoC performance, in terms of network throughput, by removing the slack in the router datapath, and in terms of average packet latency, by enabling incoming flits to bypass, when possible, allocation and ST stages. More precisely, this thesis introduces Dual Data-Rate (DDR) NoC architectures which exploit the slack present in the NoC datapath to operate it at DDR. This requires a clock with period twice the datapath delay and removes the control logic from the critical path. DDR datapaths enable throughput higher than existing single data-rate (SDR) networks where the clock period is defined by the control logic. Additionally, this thesis supplements DDR NoC architectures with varying levels of pipeline stage bypassing capabilities to reduce low-load packet latency. In order to avoid complex logic required for bypassing from all inputs to all outputs, this thesis implements and evaluates a simplified bypassing approach. DDR NoC routers support bypassing of the allocation stage for flits propagating an in-network straight hop (i.e. East to West, North to South and vice versa) and when entering or exiting the network. Disabling bypassing during XY-turns limits its benefits, but, for most routing algorithms under low traffic loads, flits encounter at most one XY-turn on their way to the destination. Bypassing allocation stage enables incoming flits to directly initiate ST, when required conditions are met, and propagate at one cycle per hop. Furthermore, DDR NoC routers allow flits to bypass the ST stage when propagating a straight hop from the head of a specific input VC. Restricting ST bypassing from a specific VC further simplifies check logic to have clock period defined by datapath delays. Bypassing ST requires dedicated bypass paths from non-local input ports to opposite output ports. It enables flits to propagate half a cycle per hop. This thesis shows that compared to current state-of-the-art SDR NoCs, operating router’s datapath at DDR improves throughput by up to 20%. Adding to a DDR NoC an allocation bypassing mechanism for straight hops reduces its packet latency by up to 45%, while maintaining the DDR throughput advantage. Enhancing allocation bypassing to include flits entering and exiting the network further reduces latency by another 24%. Finally, adding ST bypassing further reduces latency by another 32%. Overall, DDR NoCs offer up to 40% lower latency and about 20% higher throughput compared to the SDR networks

Photonic Interconnection Networks for Exascale Computers

[ES] En los últimos años, distintos proyectos alrededor del mundo se han centrado en el diseño de supercomputadores capaces de alcanzar la meta de la computación a exascala, con el objetivo de soportar la ejecución de aplicaciones de gran importancia para la sociedad en diversos campos como el de la salud, la inteligencia artificial, etc. Teniendo en cuenta la creciente tendencia de la potencia computacional en cada generación de supercomputadores, este objetivo se prevee accesible en los próximos años. Alcanzar esta meta requiere abordar diversos retos en el diseño y desarrollo del sistema. Uno de los principales es conseguir unas comunicaciones rápidas y eficientes entre el inmenso número de nodos de computo y los sitemas de memoria. La tecnología fotónica proporciona ciertas ventajas frente a las redes eléctricas, como un mayor ancho de banda en los enlaces, un mayor paralelismo a nivel de comunicaciones gracias al DWDM o una mejor gestión del cableado gracias a su reducido tamaño. En la tesis se ha desarrollado un estudio de viabilidad y desarrollo de redes de interconexión haciendo uso de la tecnología fotónica para los futuros sistemas a exaescala dentro del proyecto europeo ExaNeSt. En primer lugar, se ha realizado un análisis y caracterización de aplicaciones exaescala. Este análisis se ha utilizado para conocer el comportamiento y requisitos de red que presentan las aplicaciones, y con ello guiarnos en el diseño de la red del sistema. El análisis considera tres parámetros: la distribución de mensajes en base a su tamaño y su tipo, el consumo de ancho de banda requerido a lo largo de la ejecución y la matriz de comunicación espacial entre los nodos. El estudio revela la necesidad de una red eficiente y rápida, debido a que la mayoría de las comunaciones se realizan en burst y con mensajes de un tamaño medio inferior a 50KB. A continuación, la tesis se centra en identificar los principales elementos que diferencian las redes fotónicas de las eléctricas. Identificamos una secuencia de pasos en el diseño de un simulador, ya sea haciéndolo desde cero con tecnología fotónica o adaptando un simulador de redes eléctricas existente para modelar la fotónica. Después se han realizado dos estudios de rendimiento y comparativas entre las actuales redes eléctricas y distintas configuraciones de redes fotónicas utilizando topologías clásicas. En el primer estudio, realizado tanto con tráfico sintético como con trazas de ExaNeSt en un toro, fat tree y dragonfly, se observa como la tecnología fotónica supone una clara mejora respecto a la eléctrica. Además, el estudio muestra que el parámetro que más afecta al rendimiento es el ancho de banda del canal fotónico. El segundo estudio muestra el comportamiento y rendimiento de aplicaciones reales en simulaciones a gran escala en una topología jellyfish. En este estudio se confirman las conclusiones obtenidas en el anterior, revelando además que la tecnología fotónica permite reducir la complejidad de algunas topologías, y por ende, el coste de la red. En los estudios realizados se ha observado una baja utilización de la red debido a que las topologías utilizadas para redes eléctricas no aprovechan las características que proporciona la tecnología fotónica. Por ello, se ha propuesto Segment Switching, una estrategia de conmutación orientada a reducir la longitud de las rutas mediante el uso de buffers intermedios. Los resultados experimentales muestran que cada topología tiene sus propios requerimientos. En el caso del toro, el mayor rendimiento se obtiene con un mayor número de buffers en la red. En el fat tree el parámetro más importante es el tamaño del buffer, obteniendo unas prestaciones similares una configuración con buffers en todos los switches que la que los ubica solo en el nivel superior. En resumen, esta tesis estudia el uso de la tecnología fotónica para las redes de sistemas a exascala y propone aprovechar[CA] Els darrers anys, múltiples projectes de recerca a tot el món s'han centrat en el disseny de superordinadors capaços d'assolir la barrera de computació exascala, amb l'objectiu de donar suport a l'execució d'aplicacions importants per a la nostra societat, com ara salut, intel·ligència artificial, meteorologia, etc. Segons la tendència creixent en la potència de càlcul en cada generació de superordinadors, es preveu assolir aquest objectiu en els propers anys. No obstant això, assolir aquest objectiu requereix abordar diferents reptes importants en el disseny i desenvolupament del sistema. Un dels principals és aconseguir comunicacions ràpides i eficients entre l'enorme nombre de nodes computacionals i els sistemes de memòria. La tecnologia fotònica proporciona diversos avantatges respecte a les xarxes elèctriques actuals, com ara un major ample de banda als enllaços, un major paral·lelisme de la xarxa gràcies a DWDM o una millor gestió del cable a causa de la seva mida molt més xicoteta. En la tesi, s'ha desenvolupat un estudi de viabilitat i desenvolupament de xarxes d'interconnexió mitjançant tecnologia fotònica per a futurs sistemes exascala dins del projecte europeu ExaNeSt. En primer lloc, s'ha dut a terme un estudi de caracterització d'aplicacions exascala dels requisits de xarxa. Els resultats de l'anàlisi ajuden a entendre els requisits de xarxa de les aplicacions exascale i, per tant, ens guien en el disseny de la xarxa del sistema. Aquesta anàlisi considera tres paràmetres principals: la distribució dels missatges en funció de la seva mida i tipus, el consum d'ample de banda requerit durant tota l'execució i els patrons de comunicació espacial entre els nodes. L'estudi revela la necessitat d'una xarxa d'interconnexió ràpida i eficient, ja que la majoria de comunicacions consisteixen en ràfegues de transmissions, cadascuna amb una mida mitjana de missatge de 50 KB. A continuació, la tesi se centra a identificar els principals elements que diferencien les xarxes fotòniques de les elèctriques. Identifiquem una seqüència de passos en el disseny i implementació d'un simulador: tractar la tecnologia fotònica des de zero o per ampliar un simulador de xarxa elèctrica existent per modelar la fotònica. Després, es presenten dos estudis principals de comparació de rendiment entre xarxes elèctriques i diferents configuracions de xarxes fotòniques mitjançant topologies clàssiques. En el primer estudi, realitzat tant amb trànsit sintètic com amb traces d'ExaNeSt en un toro, fat tree i dragonfly, vam trobar que la tecnologia fotònica representa una millora notable respecte a la tecnologia elèctrica. A més, l'estudi mostra que el paràmetre que més afecta el rendiment és l'amplada de banda del canal fotònic. Aquest darrer estudi analitza el rendiment d'aplicacions reals en simulacions a gran escala en una topologia jellyfish. Els resultats d'aquest estudi corroboren les conclusions obtingudes en l'anterior, revelant també que la tecnologia fotònica permet reduir la complexitat d'algunes topologies i, per tant, el cost de la xarxa. En els estudis anteriors ens adonem que la xarxa estava infrautilitzada principalment perquè les topologies estudiades per a xarxes elèctriques no aprofiten les característiques proporcionades per la tecnologia fotònica. Per aquest motiu, proposem Segment Switching, una estratègia de commutació destinada a reduir la longitud de les rutes mitjançant la implementació de memòries intermèdies en nodes intermedis al llarg de la ruta. Els resultats experimentals mostren que cadascuna de les topologies estudiades presenta diferents requisits de memòria intermèdia. Per al toro, com més gran siga el nombre de memòries intermèdies a la xarxa, major serà el rendiment. Per al fat tree, el paràmetre clau és la mida de la memòria intermèdia, aconseguint un rendiment similar tant amb una configuració amb memòria intermèdia en tots els co[EN] In the last recent years, multiple research projects around the world have focused on the design of supercomputers able to reach the exascale computing barrier, with the aim of supporting the execution of important applications for our society, such as health, artificial intelligence, meteorology, etc. According to the growing trend in the computational power in each supercomputer generation, this objective is expected to be reached in the coming years. However, achieving this goal requires addressing distinct major challenges in the design and development of the system. One of the main ones is to achieve fast and efficient communications between the huge number of computational nodes and the memory systems. Photonics technology provides several advantages over current electrical networks, such as higher bandwidth in the links, greater network parallelism thanks to DWDM, or better cable management due to its much smaller size. In this thesis, a feasibility study and development of interconnection networks have been developed using photonics technology for future exascale systems within the European project ExaNeSt. First, a characterization study of exascale applications from the network requirements has been carried out. The results of the analysis help understand the network requirements of exascale applications, and thereby guide us in the design of the system network. This analysis considers three main parameters: the distribution of the messages based on their size and type, the required bandwidth consumption throughout the execution, and the spatial communication patterns between the nodes. The study reveals the need for a fast and efficient interconnection network, since most communications consist of bursts of transmissions, each with an average message size of 50 KB. Next, this dissertation concentrates on identifying the main elements that differentiate photonic networks from electrical ones. We identify a sequence of steps in the design and implementation of a simulator either i) dealing with photonic technology from scratch or ii) to extend an existing electrical network simulator in order to model photonics. After that, two main performance comparison studies between electrical networks and different configurations of photonic networks are presented using classical topologies. In the former study, carried out with both synthetic traffic and traces of ExaNeSt in a torus, fat tree and dragonfly, we found that photonic technology represents a noticeable improvement over electrical technology. Furthermore, the study shows that the parameter that most affects the performance is the bandwidth of the photonic channel. The latter study analyzes performance of real applications in large-scale simulations in a jellyfish topology. The results of this study corroborates the conclusions obtained in the previous, also revealing that photonic technology allows reducing the complexity of some topologies, and therefore, the cost of the network. In the previous studies we realize that the network was underutilized mainly because the studied topologies for electrical networks do not take advantage of the features provided by photonic technology. For this reason, we propose Segment Switching, a switching strategy aimed at reducing the length of the routes by implementing buffers at intermediate nodes along the path. Experimental results show that each of the studied topologies presents different buffering requirements. For the torus, the higher the number of buffers in the network, the higher the performance. For the fat tree, the key parameter is the buffer size, achieving similar performance a configuration with buffers on all switches that locating buffers only at the top level. In summary, this thesis studies the use of photonic technology for networks of exascale systems, and proposes to take advantage of the characteristics of this technology in current electrical network topologies.This thesis has been conceived from the work carried out by Polytechnic University of Valencia in the ExaNeSt European projectDuro Gómez, J. (2021). Photonic Interconnection Networks for Exascale Computers [Tesis doctoral]. Universitat Politècnica de València. https://doi.org/10.4995/Thesis/10251/166796TESI

High Performance On-Chip Interconnects Design for Future Many-Core Architectures

Switch-based Network-on-Chip (NoC) is a widely accepted inter-core communication infrastructure for Chip Multiprocessors (CMPs). With the continued advance of CMOS technology, the number of cores on a single chip keeps increasing at a rapid pace. It is highly expected that many-core architectures with more than hundreds of processor cores will be commercialized in the near future. In such a large scale CMP system, NoC overheads are more dominant than computation power in determining overall system performance. Also, for modern computational workloads requiring abundant thread level parallelism (TLP), NoC design for highly-parallel, many-core accelerators such as General Purpose Graphics Processing Units (GPGPUs) is of primary importance in harnessing the potential of massive thread- and data-level parallelism. In these contexts, it is critical that NoC provides both low latency and high bandwidth within limited on-chip power and area budgets. In this dissertation, we explore various design issues inherent in future many-core architectures, CMPs and GPGPUs, to achieve both high performance and power efficiency. First, we deal with issues in using a promising next generation memory technology, Spin-Transfer Torque Magnetic RAM (STT-MRAM), for NoC input buffers in CMPs. Using a high density and low leakage memory offers more buffer capacities with the same die footprint, thus helping increase network throughput in NoC routers. However, its long latency and high power consumption in write operations still need to be addressed. Thus, we propose a hybrid design of input buffers using both SRAM and STT-MRAM to hide the long write latency efficiently. Considering that simple data migration in the hybrid buffer consumes more dynamic power compared to SRAM, we provide a lazy migration scheme that reduces the dynamic power consumption of the hybrid buffer. Second, we propose the first NoC router design that uses only STT-MRAM, providing much larger buffer space with less power consumption, while preserving data integrity. To hide the multicycle writes, we employ a multibank STT-MRAM buffer, a virtual channel with multiple banks where every incoming flit is seamlessly pipelined to each bank alternately. Our STT-MRAM design has aggressively reduced the retention time, resulting in a significant reduction in the latency and power overheads of write operations. To ensure data integrity against inadvertent bit flips from the thermal fluctuation during the given retention time, we propose a cost-efficient dynamic buffer refresh scheme combined with Error Correcting Codes (ECC) to detect and correct data corruption. Third, we present schemes for bandwidth-efficient on-chip interconnects in GPGPUs. GPGPUs place a heavy demand on the on-chip interconnect between the many cores and a few memory controllers (MCs). Thus, traffic is highly asymmetric, impacting on-chip resource utilization and system performance. Here, we analyze the communication demands of typical GPGPU applications, and propose efficient NoC designs to meet those demands