Evaluation of VIIRS Nightfire Product and Comparison with MODIS and VIIRS Active Fire Products in a Russian Gas Flaring Region.

Gas flaring is a commonly used practice for disposing of waste gases emerging from industrial oil drilling and production processes. It is a serious environmental and economic hazard with adverse impacts on air quality, climate, and the public health. Accurate determination of flare locations and estimation of associated emissions are therefore of prime importance. Recently developed Visible Infrared Imaging Radiometer Suite (VIIRS) Nightfire product (VNF) has shown remarkable efficiency in detecting gas flares globally, owing primarily to its use of Shortwave Infrared (SWIR) band in its detection algorithm. This study compares and contrast nocturnal hot source detection by VNF to detections by other established fire detection products (i.e., Moderate Resolution Imaging Spectroradiometer (MODIS) Terra Thermal Anomalies product (MOD14), MODIS Aqua Thermal Anomalies product (MYD14) and VIIRS Applications Related Active Fire Product (VAFP)) over an extensive gas flaring region in Russia ‑ Khanty Mansiysk Autonomous Okrug, for the time period of April - August 2013. The surface hotspots detected by VNF were found to be much higher in magnitude than detected by other products. An attempt to replicate VNF algorithm locally for better comprehension, revealed threshold related discrepancies in VNF V1.0 in multiple spectral bands. Case studies for reconciliation between VNF‑R (VNF replicated product) and VAFP hotspots showed that convergence in hotspot detection between two products is possible by scaling up VNF-R thresholds, and, VAFP can detect large flares having strong spectral signature in SWIR bands. The efficacy of VNF hotspot detection was evaluated for 10 previously identified flare locations with varying hot source sizes over the period of April‑August 2013. VNF was able to detect all the test sites with frequency of detection varying between 20% to 42% of the days tested. Mean areas of tested gas flares estimated by VNF showed good agreement with areas of flares computed using Google Earth with a linear correlation of 0.91; however, VNF estimated areas were found to be somewhat underestimated. Overall the results indicate significant potential of VNF in characterizing gas flaring from space. Advisor: Mark R. Anderso

The VIIRS-Based RST-FLARE configuration: The Val d'Agri Oil Center Gas Flaring Investigation in between 2015-2019

The RST (Robust Satellite Techniques)-FLARE algorithm is a satellite-based method using a multitemporal statistical analysis of nighttime infrared signals strictly related to industrial hotspots, such as gas flares. The algorithm was designed for both identifying and characterizing gas flares in terms of radiant/emissive power. The Val d'Agri Oil Center (COVA) is a gas and oil pre-treatment plant operating for about two decades within an anthropized area of Basilicata region (southern Italy) where it represents a significant potential source of social and environmental impacts. RST-FLARE, developed to study and monitor the gas flaring activity of this site by means of MODIS (Moderate Resolution Imaging Spectroradiometer) data, has exported VIIRS (Visible Infrared Imaging Radiometer Suite) records by exploiting the improved spatial and spectral properties offered by this sensor. In this paper, the VIIRS-based configuration of RST-FLARE is presented and its application on the recent (2015-2019) gas flaring activity at COVA is analyzed and discussed. Its performance in gas flaring characterization is in good agreement with VIIRS Nightfire outputs to which RST-FLARE seems to provide some add-ons. The great consistency of radiant heat estimates computed with both RST-FLARE developed configurations allows proposing a multi-sensor RST-FLARE strategy for a more accurate multi-year analysis of gas flaring

Multiple Angle Observations Would Benefit Visible Band Remote Sensing Using Night Lights

The spatial and angular emission patterns of artificial and natural light emitted, scattered, and reflected from the Earth at night are far more complex than those for scattered and reflected solar radiation during daytime. In this commentary, we use examples to show that there is additional information contained in the angular distribution of emitted light. We argue that this information could be used to improve existing remote sensing retrievals based on night lights, and in some cases could make entirely new remote sensing analyses possible. This work will be challenging, so we hope this article will encourage researchers and funding agencies to pursue further study of how multi‐angle views can be analyzed or acquired

Improving Nocturnal Fire Detection with the VIIRS Day-Night Band

As an important component in the Earth-atmosphere system, wildfires are a serious threat to life and property that—despite improving warning systems—have exacted greater costs in recent years. In addition, they impact global atmospheric chemistry by releasing potent trace gasses and aerosols. Using the Visible Infrared Imaging Radiometer Suite (VIIRS), this study investigates the adjustment of fire pixel selection criteria to include visible light signatures at night, creating the Firelight Detection Algorithm (FILDA). This allows for greatly improved detection of smaller and cooler fires from satellite observations. VIIRS scenes with coincident Advanced Spaceborne Thermal Emission and Reflection (ASTER) overpasses are examined after applying the operational VIIRS fire product algorithm and including a modified candidate fire pixel selection approach, which lowers the 4 μm brightness temperature threshold from 305 K but includes a minimum day-night band (DNB) radiance. FILDA is tested by applying it to scenes in different environments, including large forest fires like the Rim Fire in California and High Park fire in Colorado, in addition to gas flares. A large increase in the number of detected fire pixels is observed with small non-agricultural wildfires, as verified with the finer-resolution ASTER data (90 m). Quantitative use of the DNB to improve detection of these smaller fires could lead to reduced warning and response times as well as provide more accurate quantification of biomass burning emissions at night. Adviser: Jun Wan

Commentary: Multiple Angle Observations Would Benefit Visible Band Remote Sensing using Night Lights

The spatial and angular emission patterns of artificial and natural light emitted, scattered, and reflected from the Earth at night are far more complex than those for scattered and reflected solar radiation during daytime. In this commentary, we use examples to show that there is additional information contained in the angular distribution of emitted light. We argue that this information could be used to improve existing remote sensing retrievals based on night lights, and in some cases could make entirely new remote sensing analyses possible. This work will be challenging, so we hope this article will encourage researchers and funding agencies to pursue further study of how multi-angle views can be analyzed or acquired

Remote sensing of night lights: a review and an outlook for the future

This is the author accepted manuscript. The final version is available from Elsevier via the DOI in this recordRemote sensing of night light emissions in the visible band offers a unique opportunity to directly observe human activity from space. This has allowed a host of applications including mapping urban areas, estimating population and GDP, monitoring disasters and conflicts. More recently, remotely sensed night lights data have found use in understanding the environmental impacts of light emissions (light pollution), including their impacts on human health. In this review, we outline the historical development of night-time optical sensors up to the current state of the art sensors, highlight various applications of night light data, discuss the special challenges associated with remote sensing of night lights with a focus on the limitations of current sensors, and provide an outlook for the future of remote sensing of night lights. While the paper mainly focuses on space borne remote sensing, ground based sensing of night-time brightness for studies on astronomical and ecological light pollution, as well as for calibration and validation of space borne data, are also discussed. Although the development of night light sensors lags behind day-time sensors, we demonstrate that the field is in a stage of rapid development. The worldwide transition to LED lights poses a particular challenge for remote sensing of night lights, and strongly highlights the need for a new generation of space borne night lights instruments. This work shows that future sensors are needed to monitor temporal changes during the night (for example from a geostationary platform or constellation of satellites), and to better understand the angular patterns of light emission (roughly analogous to the BRDF in daylight sensing). Perhaps most importantly, we make the case that higher spatial resolution and multispectral sensors covering the range from blue to NIR are needed to more effectively identify lighting technologies, map urban functions, and monitor energy use.European Union Horizon 2020Helmholtz AssociationNatural Environment Research Council (NERC)Chinese Academy of ScienceLeibniz AssociationIGB Leibniz Institut

CIRA annual report FY 2014/2015

Reporting period July 1, 2014-March 31, 2015

Land surface temperature and evapotranspiration estimation in the Amazon evergreen forests using remote sensing data

Amazonian tropical forests play a significant role in global water, carbon and energy cycles. Considering the relevance of this biome and the climate change projections which predict a hotter and drier climate for the region, the monitoring of the vegetation status of these forests becomes of significant importance. In this context, vegetation temperature and evapotranspiration (ET) can be considered as key variables. Vegetation temperature is directly linked with plant physiology. In addition, some studies have shown the existing relationship between this variable and the CO2 absorption capacity and biomass loss of these forests. Evapotranspiration resulting from the combined processes of transpiration and evaporation links the terrestrial water, carbon and surface energy exchanges of these forests. How this variable will response to the changing climate is critical to understand the stability of these forests. Satellite remote sensing is presented as a feasible means in order to provide accurate spatially-distributed estimates of these variables. Nevertheless, the use of satellite passive imagery for analysing this region still has some limitations being of special importance the proper cloud masking of the satellite data which becomes a difficult task due to the continuous cloud cover of the region. Under the light of the aforementioned issues, the present doctoral thesis is aimed at estimating the land surface temperature and evapotranspiration of the Amazonian tropical forests using remote sensing data. In addition, as cloud screening of satellite imagery is a critical step in the processing chain of the previous magnitudes and becomes of special importance for the study region this topic has also been included in this thesis. We have mainly focused on the use of data from the Moderate Resolution Imaging Spectroradiometer (MODIS) which is amongst major tools for studying this region. Regarding the cloud detection topic, the potential of supervised learning algorithms for cloud masking was studied in order to overcome the cloud contamination issue of the current satellite products. Models considered were: Gaussian Naïve Bayes (GNB), Linear Discriminant Analysis (LDA), Quadratic Discriminant Analysis (QDA), Random Forests (RF), Support Vector Machine (SVM) and Multilayer Perceptron (MLP). These algorithms are able to provide a continuous measure of cloud masking uncertainty (i.e. a probability estimate of each pixel belonging to clear and cloudy class) and therefore can be used under the light of a probabilistic approach. Reference dataset (a priori knowledge) requirement was satisfied by considering the collocation of Cloud Profiling Radar (CPR) and Cloud Aerosol Lidar with Orthogonal Polarization (CALIOP) observations with MODIS sensor. Model performance was tested using three independent datasets: 1) collocated CPR/CALIOP and MODIS data, 2) MODIS manually classified images and 3) in-situ ground data. For the case of satellite image and in-situ testing, results were additionally compared to current operative MYD35 (version 6.1) and Multi-Angle Implementation of the Atmospheric Correction (MAIAC) cloud masking algorithms. These results showed that machine learning algorithms were able to improve MODIS operative cloud masking performance over the region. MYD35 and MAIAC tended to underestimate and overestimate the cloud cover, respectively. Amongst the models considered, LDA stood out as the best candidate because of its maximum accuracy (difference in Kappa coefficient of 0.293/0.155 (MYD35 /MAIAC respectively)) and minimum computational associated. Regarding the estimation of land surface temperature (LST), the aim of this study was to generate specific LST products for the Amazonian tropical forests. This goal was accomplished by using a tuned split-window (SW) equation. Validation of the LST products was obtained by direct comparison between LST estimates as derived from the algorithms and two types of different LST observations: in-situ LST (T-based validation) and LST derived from the R-based method. In addition, LST algorithms were validated using independent simulated data. In-situ LST was retrieved from two infrared radiometers (SI-100 and IR-120) and a CNR4 net radiometer, situated at Tambopata test site (12.832 S, 62.282 W) in the Peruvian Amazon. Apart from this, current satellite LST products were also validated and compared to the tuned split-window. Although we have mainly focus on MODIS LST products which derive from three different LST algorithms: split-window, day and night (DN) and Temperature Emissivity Separation (TES), we have also considered the inclusion of the Visible Infrared Imaging Radiometer Suite (VIIRS) sensor. In addition, a first assessment of the Sea and Land Surface Temperature Radiometer (SLSTR) is presented. Validation was performed separately for daytime and nighttime conditions. For MODIS sensor, current LST products showed Root Mean Square Errors (RMSE) in LST estimations between 2 K and 3K for daytime and 1 K and 2 K for nighttime. In the best case (with a restrictive cloud screening) RMSE errors decrease to values below 2K and around 1 K, respectively. The proposed LST showed RMSE values of 1K to approximately 2 K and 0.7-1.5 K (below 1.5 K and below 1 K in the best case) for daytime and nighttime conditions, thus improving current LST MODIS products. This is also in agreement with the R-based validation results, which show a RMSE reduction of 0.7 K to 1.7 K in comparison to MODIS LST products. For the case of VIIRS sensor daytime conditions, VIIRS-TES algorithm provides the best performance with a difference of 0.2 K to around 0.3 K in RMSE regarding the split window algorithm (in the best case it reduces to 0.2 K). All VIIRS LST products considered have RMSE values between 2 K and 3K. At nighttime, however VIIRS-TES is not able to outperform the SW algorithm. A difference of 0.7 K to 0.8 K in RMSE is obtained. Contrary to MODIS and the SW LST products, VIIRS-TES tends to overestimate in-situ LST values. Regarding SLSTR sensor, the L2 product provides a better agreement with in-situ observations than the proposed algorithm (daytime difference in RMSE around 0.6 K and up 0.07 K at nighttime). In the estimation of the ET, we focused on the evaluation of four commonly used remote-sensing based ET models. These were: i) Priestley-Taylor Jet Propulsion Laboratory (PT-JPL), ii) Penman-Monteith MODIS operative parametrization (PM-Mu), iii) Surface Energy Balance System (SEBS), and iv) Satellite Application Facility on Land Surface Analysis (LSASAF). These models were forced using remote-sensing data from MODIS and two ancillary meteorological data sources: i) in-situ data extracted from Large-Scale Biosphere-Atmosphere Experiment (LBA) stations (scenario I), and ii) three reanalysis datasets (scenario II), including Modern-Era Retrospective analysis for Research and Application (MERRA-2), European Centre for Medium-range Weather Forecasts (ECMWF) Re-Analysis-Interim (ERA-Interim), and Global Land Assimilation System (GLDAS-2.1). Performance of algorithms under the two scenarios was validated using in-situ eddy-covariance measurements. For scenario I, PT-JPL provided the best agreement with in-situ ET observations (RMSE = 0.55 mm/day, R = 0.88). Neglecting water canopy evaporation resulted in an underestimation of ET measurements for LSASAF. SEBS performance was similar to that of PT-JPL, nevertheless SEBS estimates were limited by the continuous cloud cover of the region. A physically-based ET gap-filling method was used in order to alleviate this issue. PM-Mu also with a similar performance to PT-JPL tended to overestimate in-situ ET observations. For scenario II, quality assessment of reanalysis input data demonstrated that MERRA-2, ERA-Interim and GLDAS-2.1 contain biases that impact model performance. In particular, biases in radiation inputs were found the main responsible of the observed biases in ET estimates. For the region, MERRA-2 tends to overestimate daily net radiation and incoming solar radiation. ERA-Interim tends to underestimate both variables, and GLDAS-2.1 tends to overestimate daily radiation while underestimating incoming solar radiation. Discrepancies amongst these inputs resulted in large absolute deviations in spatial patterns (deviations greater than 500 mm/year) and temporal patterns