Exploring heterogeneous scheduling for edge computing with CPU and FPGA MPSoCs

This paper presents a framework targeted to low-cost and low-power heterogeneous MultiProcessors that exploits FPGAs and multicore CPUs, with the overarching goal of providing developers with a productive programming model and runtime support to fully use all the processing resources available. FPGA productivity is achieved using a high-level programming model based on OpenCL, the standard for cross-platform parallel heterogeneous programming. In this work, we focus on the parallel for pattern, and as part of the runtime support for this pattern, we leverage a new scheduler that strives to maximize the number of iterations per joule by dynamically and adaptively partitioning the iteration space between the multicore and the accelerator when working simultaneously. A total of 7 benchmarks are ported and optimized for a low-cost DE1 board. The results show that the heterogeneous solution can improve performance up to 2.9x and increases energy efficiency up to 2.7x compared tothe traditional approach of keeping all the CPU cores idle while the accelerator computes the workload. Our results also demonstrate two interesting insights: First, an adaptive scheduler able to find at runtime the right chunk size for each type of application and device configuration is an essential component for these kinds of heterogeneous platforms, and second, device configurations that provide higher throughput do not always achieve better energy eciency when only the running power (excluding the idle power component) is considered

Energy Aware Runtime Systems for Elastic Stream Processing Platforms

Following an invariant growth in the required computational performance of processors, the multicore revolution started around 20 years ago. This revolution was mainly an answer to power dissipation constraints restricting the increase of clock frequency in single-core processors. The multicore revolution not only brought in the challenge of parallel programming, i.e. being able to develop software exploiting the entire capabilities of manycore architectures, but also the challenge of programming heterogeneous platforms. The question of “on which processing element to map a specific computational unit?”, is well known in the embedded community. With the introduction of general-purpose graphics processing units (GPGPUs), digital signal processors (DSPs) along with many-core processors on different system-on-chip platforms, heterogeneous parallel platforms are nowadays widespread over several domains, from consumer devices to media processing platforms for telecom operators. Finding mapping together with a suitable hardware architecture is a process called design-space exploration. This process is very challenging in heterogeneous many-core architectures, which promise to offer benefits in terms of energy efficiency. The main problem is the exponential explosion of space exploration. With the recent trend of increasing levels of heterogeneity in the chip, selecting the parameters to take into account when mapping software to hardware is still an open research topic in the embedded area. For example, the current Linux scheduler has poor performance when mapping tasks to computing elements available in hardware. The only metric considered is CPU workload, which as was shown in recent work does not match true performance demands from the applications. Doing so may produce an incorrect allocation of resources, resulting in a waste of energy. The origin of this research work comes from the observation that these approaches do not provide full support for the dynamic behavior of stream processing applications, especially if these behaviors are established only at runtime. This research will contribute to the general goal of developing energy-efficient solutions to design streaming applications on heterogeneous and parallel hardware platforms. Streaming applications are nowadays widely spread in the software domain. Their distinctive characiteristic is the retrieving of multiple streams of data and the need to process them in real time. The proposed work will develop new approaches to address the challenging problem of efficient runtime coordination of dynamic applications, focusing on energy and performance management.Efter en oföränderlig tillväxt i prestandakrav hos processorer, började den flerkärniga processor-revolutionen för ungefär 20 år sedan. Denna revolution skedde till största del som en lösning till begränsningar i energieffekten allt eftersom klockfrekvensen kontinuerligt höjdes i en-kärniga processorer. Den flerkärniga processor-revolutionen medförde inte enbart utmaningen gällande parallellprogrammering, m.a.o. förmågan att utveckla mjukvara som använder sig av alla delelement i de flerkärniga processorerna, men också utmaningen med programmering av heterogena plattformar. Frågeställningen ”på vilken processorelement skall en viss beräkning utföras?” är väl känt inom ramen för inbyggda datorsystem. Efter introduktionen av grafikprocessorer för allmänna beräkningar (GPGPU), signalprocesserings-processorer (DSP) samt flerkärniga processorer på olika system-on-chip plattformar, är heterogena parallella plattformar idag omfattande inom många domäner, från konsumtionsartiklar till mediaprocesseringsplattformar för telekommunikationsoperatörer. Processen att placera beräkningarna på en passande hårdvaruplattform kallas för utforskning av en designrymd (design-space exploration). Denna process är mycket utmanande för heterogena flerkärniga arkitekturer, och kan medföra fördelar när det gäller energieffektivitet. Det största problemet är att de olika valmöjligheterna i designrymden kan växa exponentiellt. Enligt den nuvarande trenden som förespår ökad heterogeniska aspekter i processorerna är utmaningen att hitta den mest passande placeringen av beräkningarna på hårdvaran ännu en forskningsfråga inom ramen för inbyggda datorsystem. Till exempel, den nuvarande schemaläggaren i Linux operativsystemet är inkapabel att hitta en effektiv placering av beräkningarna på den underliggande hårdvaran. Det enda mätsättet som används är processorns belastning vilket, som visats i tidigare forskning, inte motsvarar den verkliga prestandan i applikationen. Användning av detta mätsätt vid resursallokering resulterar i slöseri med energi. Denna forskning härstammar från observationerna att dessa tillvägagångssätt inte stöder det dynamiska beteendet hos ström-processeringsapplikationer (stream processing applications), speciellt om beteendena bara etableras vid körtid. Denna forskning kontribuerar till det allmänna målet att utveckla energieffektiva lösningar för ström-applikationer (streaming applications) på heterogena flerkärniga hårdvaruplattformar. Ström-applikationer är numera mycket vanliga i mjukvarudomän. Deras distinkta karaktär är inläsning av flertalet dataströmmar, och behov av att processera dem i realtid. Arbetet i denna forskning understöder utvecklingen av nya sätt för att lösa det utmanade problemet att effektivt koordinera dynamiska applikationer i realtid och fokus på energi- och prestandahantering

A Model-based Design Framework for Application-specific Heterogeneous Systems

The increasing heterogeneity of computing systems enables higher performance and power efficiency. However, these improvements come at the cost of increasing the overall complexity of designing such systems. These complexities include constructing implementations for various types of processors, setting up and configuring communication protocols, and efficiently scheduling the computational work. The process for developing such systems is iterative and time consuming, with no well-defined performance goal. Current performance estimation approaches use source code implementations that require experienced developers and time to produce. We present a framework to aid in the design of heterogeneous systems and the performance tuning of applications. Our framework supports system construction: integrating custom hardware accelerators with existing cores into processors, integrating processors into cohesive systems, and mapping computations to processors to achieve overall application performance and efficient hardware usage. It also facilitates effective design space exploration using processor models (for both existing and future processors) that do not require source code implementations to estimate performance. We evaluate our framework using a variety of applications and implement them in systems ranging from low power embedded systems-on-chip (SoC) to high performance systems consisting of commercial-off-the-shelf (COTS) components. We show how the design process is improved, reducing the number of design iterations and unnecessary source code development ultimately leading to higher performing efficient systems

Proceedings of the 5th International Workshop on Reconfigurable Communication-centric Systems on Chip 2010 - ReCoSoC\u2710 - May 17-19, 2010 Karlsruhe, Germany. (KIT Scientific Reports ; 7551)

ReCoSoC is intended to be a periodic annual meeting to expose and discuss gathered expertise as well as state of the art research around SoC related topics through plenary invited papers and posters. The workshop aims to provide a prospective view of tomorrow\u27s challenges in the multibillion transistor era, taking into account the emerging techniques and architectures exploring the synergy between flexible on-chip communication and system reconfigurability

Lightweight asynchronous scheduling in heterogeneous reconfigurable systems

The trend for heterogeneous embedded systems is the integration of accelerators and general-purpose CPU cores on the same die. In these integrated architectures, like the Zynq UltraScale+ board (CPU+FPGA) that we target in this work, hardware support for shared memory and low-overhead synchronization between the accelerator and the CPU cores make the case for exploring strategies that exploit a tight collaboration between the CPUs and the accelerator. In this paper we propose a novel lightweight scheduling strategy, FastFit, targeted to FPGA accelerators, and a new scheduler based on it, named MultiFastFit, which asynchronously tackles heterogeneous systems comprised of a variety of CPU cores and FPGA IPs. Our strategy significantly reduces the overhead to automatically compute the near-optimal chunksizes when compared to a previous state-of-the-art auto-tuned approach, which makes our approach more suitable for fine-grained applications. Additionally, our scheduler MultiFastFit has been designed to enable the efficient co-execution of work among compute devices in such a way that all the devices are busy while minimizing the load unbalance. Our approaches have been evaluated using four benchmarks carefully tuned for the low-power UltraScale+ platform. Our experiments demonstrate that the FastFit strategy always finds the near-optimal FPGA chunksize for any device configuration at a reasonable cost, even for fine-grained and irregular applications, and that heterogeneous CPU+FPGA co-executions that exploit all the compute devices are usually faster and more energy efficient than the CPU-only and FPGA-only executions. We have also compared MultiFastFit with other state-of-the-art scheduling strategies, finding that it outperforms other auto-tuned approach up to 2x and it achieves similar results to manually-tuned schedulers without requiring an offline search of the ideal CPU-FPGA partition or FPGA chunk granularity. © 2022 The Author

Design Space Exploration and Resource Management of Multi/Many-Core Systems

The increasing demand of processing a higher number of applications and related data on computing platforms has resulted in reliance on multi-/many-core chips as they facilitate parallel processing. However, there is a desire for these platforms to be energy-efficient and reliable, and they need to perform secure computations for the interest of the whole community. This book provides perspectives on the aforementioned aspects from leading researchers in terms of state-of-the-art contributions and upcoming trends

MPSoCBench : um framework para avaliação de ferramentas e metodologias para sistemas multiprocessados em chip

Orientador: Rodolfo Jardim de AzevedoTese (doutorado) - Universidade Estadual de Campinas, Instituto de ComputaçãoResumo: Recentes metodologias e ferramentas de projetos de sistemas multiprocessados em chip (MPSoC) aumentam a produtividade por meio da utilização de plataformas baseadas em simuladores, antes de definir os últimos detalhes da arquitetura. No entanto, a simulação só é eficiente quando utiliza ferramentas de modelagem que suportem a descrição do comportamento do sistema em um elevado nível de abstração. A escassez de plataformas virtuais de MPSoCs que integrem hardware e software escaláveis nos motivou a desenvolver o MPSoCBench, que consiste de um conjunto escalável de MPSoCs incluindo quatro modelos de processadores (PowerPC, MIPS, SPARC e ARM), organizado em plataformas com 1, 2, 4, 8, 16, 32 e 64 núcleos, cross-compiladores, IPs, interconexões, 17 aplicações paralelas e estimativa de consumo de energia para os principais componentes (processadores, roteadores, memória principal e caches). Uma importante demanda em projetos MPSoC é atender às restrições de consumo de energia o mais cedo possível. Considerando que o desempenho do processador está diretamente relacionado ao consumo, há um crescente interesse em explorar o trade-off entre consumo de energia e desempenho, tendo em conta o domínio da aplicação alvo. Técnicas de escalabilidade dinâmica de freqüência e voltagem fundamentam-se em gerenciar o nível de tensão e frequência da CPU, permitindo que o sistema alcance apenas o desempenho suficiente para processar a carga de trabalho, reduzindo, consequentemente, o consumo de energia. Para explorar a eficiência energética e desempenho, foram adicionados recursos ao MPSoCBench, visando explorar escalabilidade dinâmica de voltaegem e frequência (DVFS) e foram validados três mecanismos com base na estimativa dinâmica de energia e taxa de uso de CPUAbstract: Recent design methodologies and tools aim at enhancing the design productivity by providing a software development platform before the definition of the final Multiprocessor System on Chip (MPSoC) architecture details. However, simulation can only be efficiently performed when using a modeling and simulation engine that supports system behavior description at a high abstraction level. The lack of MPSoC virtual platform prototyping integrating both scalable hardware and software in order to create and evaluate new methodologies and tools motivated us to develop the MPSoCBench, a scalable set of MPSoCs including four different ISAs (PowerPC, MIPS, SPARC, and ARM) organized in platforms with 1, 2, 4, 8, 16, 32, and 64 cores, cross-compilers, IPs, interconnections, 17 parallel version of software from well-known benchmarks, and power consumption estimation for main components (processors, routers, memory, and caches). An important demand in MPSoC designs is the addressing of energy consumption constraints as early as possible. Whereas processor performance comes with a high power cost, there is an increasing interest in exploring the trade-off between power and performance, taking into account the target application domain. Dynamic Voltage and Frequency Scaling techniques adaptively scale the voltage and frequency levels of the CPU allowing it to reach just enough performance to process the system workload while meeting throughput constraints, and thereby, reducing the energy consumption. To explore this wide design space for energy efficiency and performance, both for hardware and software components, we provided MPSoCBench features to explore dynamic voltage and frequency scalability (DVFS) and evaluated three mechanisms based on energy estimation and CPU usage rateDoutoradoCiência da ComputaçãoDoutora em Ciência da Computaçã

Task Mapping and Scheduling in FPGA-based Heterogeneous Real-time Systems: A RISC-V Case-Study

Heterogeneous platforms, that integrate CPU and FPGA-based processing units, are emerging as a promising solu- tion for accelerating various applications in the embedded system domain. However, in this context, comprehensive studies that combine the theoretical aspects of real-time scheduling of tasks along with practical runtime architectural characteristics have mostly been neglected so far. To fill this gap, in this paper we propose a real-time scheduling algorithm with the objective of minimizing the overall execution time under hardware resource constraints for heterogeneous CPU+FPGA architectures. In particular, we propose an Integer Linear Programming (ILP) based technique for task allocation and scheduling. We then show how to implement a given scheduling on a practical CPU+FPGA system regarding current technology restrictions and validate our methodology using a practical RISC- V case-study. Our experiments demonstrate that performance gains of 40% and area usage reductions of 67% are possible compared to a full software and hardware execution, respectively