goSLP: Globally Optimized Superword Level Parallelism Framework

Modern microprocessors are equipped with single instruction multiple data (SIMD) or vector instruction sets which allow compilers to exploit superword level parallelism (SLP), a type of fine-grained parallelism. Current SLP auto-vectorization techniques use heuristics to discover vectorization opportunities in high-level language code. These heuristics are fragile, local and typically only present one vectorization strategy that is either accepted or rejected by a cost model. We present goSLP, a novel SLP auto-vectorization framework which solves the statement packing problem in a pairwise optimal manner. Using an integer linear programming (ILP) solver, goSLP searches the entire space of statement packing opportunities for a whole function at a time, while limiting total compilation time to a few minutes. Furthermore, goSLP optimally solves the vector permutation selection problem using dynamic programming. We implemented goSLP in the LLVM compiler infrastructure, achieving a geometric mean speedup of 7.58% on SPEC2017fp, 2.42% on SPEC2006fp and 4.07% on NAS benchmarks compared to LLVM's existing SLP auto-vectorizer.Comment: Published at OOPSLA 201

Libra: Achieving Efficient Instruction- and Data- Parallel Execution for Mobile Applications.

Mobile computing as exemplified by the smart phone has become an integral part of our daily lives. The next generation of these devices will be driven by providing richer user experiences and compelling capabilities: higher definition multimedia, 3D graphics, augmented reality, and voice interfaces. To meet these goals, the core computing capabilities of the smart phone must be scaled. But, the energy budgets are increasing at a much lower rate, thus fundamental improvements in computing efficiency must be garnered. To meet this challenge, computer architects employ hardware accelerators in the form of SIMD and VLIW. Single-instruction multiple-data (SIMD) accelerators provide high degrees of scalability for applications rich in data-level parallelism (DLP). Very long instruction word (VLIW) accelerators provide moderate scalability for applications with high degrees of instruction-level parallelism (ILP). Unfortunately, applications are not so nicely partitioned into two groups: many applications have some DLP, but also contain significant fractions of code with low trip count loops, complex control/data dependences, or non-uniform execution behavior for which no DLP exists. Therefore, a more adaptive accelerator is required to be able to deploy resources as needed: exploit DLP on SIMD when it’s available, but fall back to ILP on the same hardware when necessary. In this thesis, we first focus on various compiler solutions that solve inefficiency problem in both VLIW and SIMD accelerators. For SIMD accelerators, a new vectorization pass, called SIMD Defragmenter, is introduced to uncover hidden DLP using subgraph identification in SIMD accelerators. CGRA express effectively accelerates sequential code regions using a bypass network in VLIW accelerators, and Resource Recycling leverages stream-graph modulo scheduling technique for scheduling of multiple code regions in multi-core accelerators. Second, we propose the new scalable multicore accelerator referred to as Libra for mobile systems, which can support execution of code regions having both DLP and ILP, as well as hybrid combinations of the two. We believe that as industry requires higher performance, the proposed flexible accelerator and compiler support will put more resources to work in order to meet the performance and power efficiency requirements.PHDElectrical EngineeringUniversity of Michigan, Horace H. Rackham School of Graduate Studieshttp://deepblue.lib.umich.edu/bitstream/2027.42/99840/1/yjunpark_1.pd

Whole-function vectorization

Abstract—Data-parallel programming languages are an impor-tant component in today’s parallel computing landscape. Among those are domain-specific languages like shading languages in graphics (HLSL, GLSL, RenderMan, etc.) and “general-purpose” languages like CUDA or OpenCL. Current implementations of those languages on CPUs solely rely on multi-threading to imple-ment parallelism and ignore the additional intra-core parallelism provided by the SIMD instruction set of those processors (like Intel’s SSE and the upcoming AVX or Larrabee instruction sets). In this paper, we discuss several aspects of implementing data-parallel languages on machines with SIMD instruction sets. Our main contribution is a language- and platform-independent code transformation that performs whole-function vectorization on low-level intermediate code given by a control flow graph in SSA form. We evaluate our technique in two scenarios: First, incorpo-rated in a compiler for a domain-specific language used in real-time ray tracing. Second, in a stand-alone OpenCL driver. We observe average speedup factors of 3.9 for the ray tracer and factors between 0.6 and 5.2 for different OpenCL kernels. I

Compiler-Driven Reconfiguration of Multiprocessors

Hussmann M, Thies M, Kastens U, Purnaprajna M, Porrmann M, Rückert U. Compiler-Driven Reconfiguration of Multiprocessors. In: Proceedings of the Workshop on Application Specific Processors (WASP) 2007. 2007.Multiprocessors enable parallel execution of a single large application to achieve a performance improvement. An application is split at instruction, data or task level (based on the granularity), such that the overhead of partitioning is minimal. Parallelization for multiprocessors is mostly restricted to a fixed granularity. Reconfiguration enables architectural variations to allow multiple granularities of operation within a multiprocessor. This adaptability optimizes resource utilization over a fixed organization. Here, a unified hardware-software approach to design a reconfigurable multiprocessor system called QuadroCore is presented. In our holistic methodology, compiler-driven reconfiguration selects from a fixed set of modes. Each mode relies on matching program analysis to exploit the architecture efficiently. For instance, a multiprocessor may adapt to different parallelization paradigms. The compiler can determine the best execution mode for each piece of code by analyzing the parallelism in a program. A fast, singlecycle, run-time reconfiguration between these predetermined modes is enabled by executing special instructions which switch coarse-grained components like instruction decoders, ALUs and register banks. Performance is evaluated in terms of execution cycles and achieved clock frequency. First results indicate suitability especially in audio and video processing applications

Optimizing SIMD execution in HW/SW co-designed processors

SIMD accelerators are ubiquitous in microprocessors from different computing domains. Their high compute power and hardware simplicity improve overall performance in an energy efficient manner. Moreover, their replicated functional units and simple control mechanism make them amenable to scaling to higher vector lengths. However, code generation for these accelerators has been a challenge from the days of their inception. Compilers generate vector code conservatively to ensure correctness. As a result they lose significant vectorization opportunities and fail to extract maximum benefits out of SIMD accelerators. This thesis proposes to vectorize the program binary at runtime in a speculative manner, in addition to the compile time static vectorization. There are different environments that support runtime profiling and optimization support required for dynamic vectorization, one of most prominent ones being: 1) Dynamic Binary Translators and Optimizers (DBTO) and 2) Hardware/Software (HW/SW) Co-designed Processors. HW/SW co-designed environment provides several advantages over DBTOs like transparent incorporations of new hardware features, binary compatibility, etc. Therefore, we use HW/SW co-designed environment to assess the potential of speculative dynamic vectorization. Furthermore, we analyze vector code generation for wider vector units and find out that even though SIMD accelerators are amenable to scaling from the hardware point of view, vector code generation at higher vector length is even more challenging. The two major factors impeding vectorization for wider SIMD units are: 1) Reduced dynamic instruction stream coverage for vectorization and 2) Large number of permutation instructions. To solve the first problem we propose Variable Length Vectorization that iteratively vectorizes for multiple vector lengths to improve dynamic instruction stream coverage. Secondly, to reduce the number of permutation instructions we propose Selective Writing that selectively writes to different parts of a vector register and avoids permutations. Finally, we tackle the problem of leakage energy in SIMD accelerators. Since SIMD accelerators consume significant amount of real estate on the chip, they become the principle source of leakage if not utilized judiciously. Power gating is one of the most widely used techniques to reduce leakage energy of functional units. However, power gating has its own energy and performance overhead associated with it. We propose to selectively devectorize the vector code when higher SIMD lanes are used intermittently. This selective devectorization keeps the higher SIMD lanes idle and power gated for maximum duration. Therefore, resulting in overall leakage energy reduction.Postprint (published version

An evaluation of current SIMD programming models for C++

SIMD extensions were added to microprocessors in the mid '90s to speed-up data-parallel code by vectorization. Unfortunately, the SIMD programming model has barely evolved and the most efficient utilization is still obtained with elaborate intrinsics coding. As a consequence, several approaches to write efficient and portable SIMD code have been proposed. In this work, we evaluate current programming models for the C++ language, which claim to simplify SIMD programming while maintaining high performance. The proposals were assessed by implementing two kernels: one standard floating-point benchmark and one real-world integer-based application, both highly data parallel. Results show that the proposed solutions perform well for the floating point kernel, achieving close to the maximum possible speed-up. For the real-world application, the programming models exhibit significant performance gaps due to data type issues, missing template support and other problems discussed in this paper

Performance comparison between Java and JNI for optimal implementation of computational micro-kernels

General purpose CPUs used in high performance computing (HPC) support a vector instruction set and an out-of-order engine dedicated to increase the instruction level parallelism. Hence, related optimizations are currently critical to improve the performance of applications requiring numerical computation. Moreover, the use of a Java run-time environment such as the HotSpot Java Virtual Machine (JVM) in high performance computing is a promising alternative. It benefits from its programming flexibility, productivity and the performance is ensured by the Just-In-Time (JIT) compiler. Though, the JIT compiler suffers from two main drawbacks. First, the JIT is a black box for developers. We have no control over the generated code nor any feedback from its optimization phases like vectorization. Secondly, the time constraint narrows down the degree of optimization compared to static compilers like GCC or LLVM. So, it is compelling to use statically compiled code since it benefits from additional optimization reducing performance bottlenecks. Java enables to call native code from dynamic libraries through the Java Native Interface (JNI). Nevertheless, JNI methods are not inlined and require an additional cost to be invoked compared to Java ones. Therefore, to benefit from better static optimization, this call overhead must be leveraged by the amount of computation performed at each JNI invocation. In this paper we tackle this problem and we propose to do this analysis for a set of micro-kernels. Our goal is to select the most efficient implementation considering the amount of computation defined by the calling context. We also investigate the impact on performance of several different optimization schemes which are vectorization, out-of-order optimization, data alignment, method inlining and the use of native memory for JNI methods.Comment: Part of ADAPT Workshop proceedings, 2015 (arXiv:1412.2347

Compilation techniques for short-vector instructions

Thesis (Ph. D.)--Massachusetts Institute of Technology, Dept. of Electrical Engineering and Computer Science, 2006.Includes bibliographical references (p. 127-133).Multimedia extensions are nearly ubiquitous in today's general-purpose processors. These extensions consist primarily of a set of short-vector instructions that apply the same opcode to a vector of operands. This design introduces a data-parallel component to processors that exploit instruction-level parallelism, and presents an opportunity for increased performance. In fact, ignoring a processor's vector opcodes can leave a significant portion of the available resources unused. In order for software developers to find short-vector instructions generally useful, the compiler must target these extensions with complete transparency and consistent performance. This thesis develops compiler techniques to target short-vector instructions automatically and efficiently. One important aspect of compilation is the effective management of memory alignment. As with scalar loads and stores, vector references are typically more efficient when accessing aligned regions. In many cases, the compiler can glean no alignment information and must emit conservative code sequences. In response, I introduce a range of compiler techniques for detecting and enforcing aligned references. In my benchmark suite, the most practical method ensures alignment for roughly 75% of dynamic memory references.(cont.) This thesis also introduces selective vectorization, a technique for balancing computation across a processor's scalar and vector resources. Current approaches for targeting short-vector instructions directly adopt vectorizing technology first developed for supercomputers. Traditional vectorization, however, can lead to a performance degradation since it fails to account for a processor's scalar execution resources. I formulate selective vectorization in the context of software pipelining. My approach creates software pipelines with shorter initiation intervals, and therefore, higher performance. In contrast to conventional methods, selective vectorization operates on a low-level intermediate representation. This technique allows the algorithm to accurately measure the performance trade-offs of code selection alternatives. A key aspect of selective vectorization is its ability to manage communication of operands between vector and scalar instructions. Even when operand transfer is expensive, the technique is sufficiently sophisticated to achieve significant performance gains. I evaluate selective vectorization on a set of SPEC FP benchmarks. On a realistic VLIW processor model, the approach achieves whole-program speedups of up to 1.35x over existing approaches. For individual loops, it provides speedups of up to 1.75x.by Samuel Larsen.Ph.D