A new charging scheme for ATM based on QoS

PhDNew services are emerging rapidly within the world of telecommunications. Charging strategies that were appropriate for individual transfer capabilities are no longer appropriate for an integrated broadband communications network. There is currently a range of technologies (such as cable television, telephony and narrow band ISDN) for the different services in use and a limited number of charging schemes are applicable for each of the underlying technologies irrespective of the services used over it. Difficulties arise when a wide range of services has to be supported on the same integrated technology such as asynchronous transfer mode (ATM); in such cases the type of service in use and the impact it has on the network becomes much more important. The subject of this thesis, therefore, is the charging strategies for integrated broadband communications networks. That is, the identification of the requirements associated with ATM charging schemes and the proposal of a new approach to charging for ATM called the “quality of service based charging scheme”. Charging for ATM is influenced by three important components: the type and content of a service being offered; the type of customer using the services; and the traffic characteristics belonging to the application supporting the services. The first two issues will largely be dependent on the business and regulatory requirements of the operators. The last item, and an essential one for ATM, is the bridge between technology and business; how are the resources used by a service quantified? Charging that is based on resource usage at the network level was the prime focus of the research reported here. With the proposed charging scheme, a distinction is first made between the four different ATM transfer capabilities that will support various services and the different quality of service requirements that may be applicable to each of them. Then, resources are distributed among buffers set-up to support the combination of these transfer capabilities and quality of services. The buffers are dimensioned according to the M/D/1/K and the ND/D/1 queuing analysis to determine the buffer efficiency and quality of service requirements. This dimensioning provides the basis for fixing the price per unit of resource and time. The actual resource used by a connection is based on the volume of cells transmitted or peak cell rate allocation in combination with traffic shapers if appropriate. Shapers are also dimensioned using the quality of service parameters. Since the buffer 4 efficiency is dependent on the quality of service requirements, users (customers) of ATM networks buy quality of service. The actual price of a connection is further subjected to a number of transformations based on the size of the resource purchased, the time of the day at which a connection is made, and the geographical locality of the destination switch. It is demonstrated that the proposed charging scheme meets all the requirements of customers and of network operators. In addition the result of the comparison of the new scheme with a number of existing, prominent, ATM charging schemes is presented, showing that the performance of the proposed scheme is better in terms of meeting the expectations of both the customers and the network operators

Quality of service over ATM networks

PhDAbstract not availabl

Resource management for multimedia traffic over ATM broadband satellite networks

PhDAbstract not availabl

Analytical models for the multiplexing of worst case traffic sources and their application to ATM traffic control.

Postprint (published version

Design of traffic shaper / scheduler for packet switches and DiffServ networks : algorithms and architectures

The convergence of communications, information, commerce and computing are creating a significant demand and opportunity for multimedia and multi-class communication services. In such environments, controlling the network behavior and guaranteeing the user\u27s quality of service is required. A flexible hierarchical sorting architecture which can function either as a traffic shaper or a scheduler according to the requirement of the traffic load is presented to meet the requirement. The core structure can be implemented as a hierarchical traffic shaper which can support a large number of connections with a wide variety of rates and burstiness without the loss of the granularity in cells\u27 conforming departure time. The hierarchical traffic shaper can implement the exact sorting scheme with a substantial reduced memory size by using two stages of timing queues, and with substantial reduction in complexity, without introducing any sorting inaccuracy. By setting a suitable threshold to the length of the departure queue and using a lookahead algorithm, the core structure can be converted to a hierarchical rateadaptive scheduler. Based on the traffic load, it can work as an exact sorting traffic shaper or a Generic Cell Rate Algorithm (GCRA) scheduler. Such a rate-adaptive scheduler can reduce the Cell Transfer Delay and the Maximum Memory Occupancy greatly while keeping the fairness in the bandwidth assignment which is the inherent characteristic of GCRA. By introducing a best-effort queue to accommodate besteffort traffic, the hierarchical sorting architecture can be changed to a near workconserving scheduler. It assigns remaining bandwidth to the best-effort traffic so that it improves the utilization, of the outlink while it guarantees the quality of service requirements of those services which require quality of service guarantees. The inherent flexibility of the hierarchical sorting architecture combined with intelligent algorithms determines its multiple functions. Its implementation not only can manage buffer and bandwidth resources effectively, but also does not require no more than off-the-shelf hardware technology. The correlation of the extra shaping delay and the rate of the connections is revealed, and an improved fair traffic shaping algorithm, Departure Event Driven plus Completing Service Time Resorting algorithm, is presented. The proposed algorithm introduces a resorting process into Departure Event Driven Traffic Shaping Algorithm to resolve the contention of multiple cells which are all eligible for transmission in the traffic shaper. By using the resorting process based on each connection\u27s rate, better fairness and flexibility in the bandwidth assignment for connections with wide range of rates can be given. A Dual Level Leaky Bucket Traffic Shaper(DLLBTS) architecture is proposed to be implemented at the edge nodes of Differentiated Services Networks in order to facilitate the quality of service management process. The proposed architecture can guarantee not only the class-based Service Level Agreement, but also the fair resource sharing among flows belonging to the same class. A simplified DLLBTS architecture is also given, which can achieve the goals of DLLBTS while maintain a very low implementation complexity so that it can be implemented with the current VLSI technology. In summary, the shaping and scheduling algorithms in the high speed packet switches and DiffServ networks are studied, and the intelligent implementation schemes are proposed for them

Satellite Networks: Architectures, Applications, and Technologies

Since global satellite networks are moving to the forefront in enhancing the national and global information infrastructures due to communication satellites' unique networking characteristics, a workshop was organized to assess the progress made to date and chart the future. This workshop provided the forum to assess the current state-of-the-art, identify key issues, and highlight the emerging trends in the next-generation architectures, data protocol development, communication interoperability, and applications. Presentations on overview, state-of-the-art in research, development, deployment and applications and future trends on satellite networks are assembled

Traffic control mechanisms with cell rate simulation for ATM networks.

PhDAbstract not availabl

ATM network impairment to video quality

Includes bibliographical reference

Dynamic bandwidth allocation in ATM networks

Includes bibliographical references.This thesis investigates bandwidth allocation methodologies to transport new emerging bursty traffic types in ATM networks. However, existing ATM traffic management solutions are not readily able to handle the inevitable problem of congestion as result of the bursty traffic from the new emerging services. This research basically addresses bandwidth allocation issues for bursty traffic by proposing and exploring the concept of dynamic bandwidth allocation and comparing it to the traditional static bandwidth allocation schemes