Indoor wireless communications and applications

Chapter 3 addresses challenges in radio link and system design in indoor scenarios. Given the fact that most human activities take place in indoor environments, the need for supporting ubiquitous indoor data connectivity and location/tracking service becomes even more important than in the previous decades. Specific technical challenges addressed in this section are(i), modelling complex indoor radio channels for effective antenna deployment, (ii), potential of millimeter-wave (mm-wave) radios for supporting higher data rates, and (iii), feasible indoor localisation and tracking techniques, which are summarised in three dedicated sections of this chapter

Context-aware Self-Optimization in Small-Cell Networks

Most mobile communications take place at indoor environments, especially in commercial and corporate scenarios. These places normally present coverage and capacity issues due to the poor signal quality, which degrade the end-user Quality of Experience (QoE). In these cases, mobile operators are offering small cells to overcome the indoor issues, being femtocells the main deployed base stations. Femtocell networks provide significant benefits to mobile operators and their clients. However, the massive integration and the particularities of femtocells, make the maintenance of these infrastructures a challenge for engineers. In this sense, Self-Organizing Networks (SON) techniques play an important role. These techniques are a key feature to intelligently automate network operation, administration and management procedures. SON mechanisms are based on the analysis of the mobile network alarms, counters and indicators. In parallel, electronics, sensors and software applications evolve rapidly and are everywhere. Thanks to this, valuable context information can be gathered, which properly managed can improve SON techniques performance. Within possible context data, one of the most active topics is the indoor positioning due to the immediate interest on indoor location-based services (LBS). At indoor commercial and corporate environments, user densities and traffic vary in spatial and temporal domain. These situations lead to degrade cellular network performance, being temporary traffic fluctuations and focused congestions one of the most common issues. Load balancing techniques, which have been identified as a use case in self-optimization paradigm for Long Term Evolution (LTE), can alleviate these congestion problems. This use case has been widely studied in macrocellular networks and outdoor scenarios. However, the particularities of femtocells, the characteristics of indoor scenarios and the influence of users’ mobility pattern justify the development of new solutions. The goal of this PhD thesis is to design and develop novel and automatic solutions for temporary traffic fluctuations and focused network congestion issues in commercial and corporate femtocell environments. For that purpose, the implementation of an efficient management architecture to integrate context data into the mobile network and SON mechanisms is required. Afterwards, an accurate indoor positioning system is developed, as a possible inexpensive solution for context-aware SON. Finally, advanced self-optimization methods to shift users from overloaded cells to other cells with spare resources are designed. These methods tune femtocell configuration parameters based on network information, such as ratio of active users, and context information, such as users’ position. All these methods are evaluated in both a dynamic LTE system-level simulator and in a field-trial

Interference diagnosis in wireless systems by using NI USRP

In both industrial and domestic environments, there will be a large increase of wireless communication systems. The density of wireless devices and need of additional bandwidth is expanding which is increasing the wireless interference. Interference emerges from unintended radiators is the main cause of degrading the Electromagnetic Compatibility and wireless communication performance in near field region and far field region and decrease the robustness and reliability. This paper presents methods of detection and removal of interference to improve EMC performance and wireless communication. We used NI USRP equipment for the diagnosis and provided the solutions to remove interference. The presented methods of interference diagnosis can efficiently optimize the performance of any wireless network

Mobile Signal Path Losses in Microcells behind Buildings

The paper presents measurement results of the GSM (900 MHz band), UMTS (2100 MHz band), and LTE (1800 MHz band) propagation path loss (PL) in the urban area behind the buildings of ten different heights. The results were compared with the 7 most popular models. It was found that the existing models approximate the experimental results with relatively large errors. The new model, which evaluates the path loss variation nature behind the buildings, is proposed. This new model shows good agreement with measurements for all three mobile technologies. The average relative error is less than 6.5 %

Mobile Networks

The growth in the use of mobile networks has come mainly with the third generation systems and voice traffic. With the current third generation and the arrival of the 4G, the number of mobile users in the world will exceed the number of landlines users. Audio and video streaming have had a significant increase, parallel to the requirements of bandwidth and quality of service demanded by those applications. Mobile networks require that the applications and protocols that have worked successfully in fixed networks can be used with the same level of quality in mobile scenarios. Until the third generation of mobile networks, the need to ensure reliable handovers was still an important issue. On the eve of a new generation of access networks (4G) and increased connectivity between networks of different characteristics commonly called hybrid (satellite, ad-hoc, sensors, wired, WIMAX, LAN, etc.), it is necessary to transfer mechanisms of mobility to future generations of networks. In order to achieve this, it is essential to carry out a comprehensive evaluation of the performance of current protocols and the diverse topologies to suit the new mobility conditions

Design of in-building wireless networks deployments using evolutionary algorithms

In this article, a novel approach to deal with the design of in-building wireless networks deployments is proposed. This approach known as MOQZEA (Multiobjective Quality Zone Based Evolutionary Algorithm) is a hybr id evolutionary algorithm adapted to use a novel fitness function, based on the definition of quality zones for the different objective functions considered. This approach is conceived to solve wireless network design problems without previous information of the required number of transmitters, considering simultaneously a high number of objective functions and optimizing multiple configuration parameters of the transmitters

Quality of service differentiation for multimedia delivery in wireless LANs

Delivering multimedia content to heterogeneous devices over a variable networking environment while maintaining high quality levels involves many technical challenges. The research reported in this thesis presents a solution for Quality of Service (QoS)-based service differentiation when delivering multimedia content over the wireless LANs. This thesis has three major contributions outlined below: 1. A Model-based Bandwidth Estimation algorithm (MBE), which estimates the available bandwidth based on novel TCP and UDP throughput models over IEEE 802.11 WLANs. MBE has been modelled, implemented, and tested through simulations and real life testing. In comparison with other bandwidth estimation techniques, MBE shows better performance in terms of error rate, overhead, and loss. 2. An intelligent Prioritized Adaptive Scheme (iPAS), which provides QoS service differentiation for multimedia delivery in wireless networks. iPAS assigns dynamic priorities to various streams and determines their bandwidth share by employing a probabilistic approach-which makes use of stereotypes. The total bandwidth to be allocated is estimated using MBE. The priority level of individual stream is variable and dependent on stream-related characteristics and delivery QoS parameters. iPAS can be deployed seamlessly over the original IEEE 802.11 protocols and can be included in the IEEE 802.21 framework in order to optimize the control signal communication. iPAS has been modelled, implemented, and evaluated via simulations. The results demonstrate that iPAS achieves better performance than the equal channel access mechanism over IEEE 802.11 DCF and a service differentiation scheme on top of IEEE 802.11e EDCA, in terms of fairness, throughput, delay, loss, and estimated PSNR. Additionally, both objective and subjective video quality assessment have been performed using a prototype system. 3. A QoS-based Downlink/Uplink Fairness Scheme, which uses the stereotypes-based structure to balance the QoS parameters (i.e. throughput, delay, and loss) between downlink and uplink VoIP traffic. The proposed scheme has been modelled and tested through simulations. The results show that, in comparison with other downlink/uplink fairness-oriented solutions, the proposed scheme performs better in terms of VoIP capacity and fairness level between downlink and uplink traffic

Project Final Report – FREEDOM ICT-248891

This document is the final publishable summary report of the objective and work carried out within the European Project FREEDOM, ICT-248891.This document is the final publishable summary report of the objective and work carried out within the European Project FREEDOM, ICT-248891.Preprin