Design thinking support: information systems versus reasoning

Numerous attempts have been made to conceive and implement appropriate information systems to support architectural designers in their creative design thinking processes. These information systems aim at providing support in very diverse ways: enabling designers to make diverse kinds of visual representations of a design, enabling them to make complex calculations and simulations which take into account numerous relevant parameters in the design context, providing them with loads of information and knowledge from all over the world, and so forth. Notwithstanding the continued efforts to develop these information systems, they still fail to provide essential support in the core creative activities of architectural designers. In order to understand why an appropriately effective support from information systems is so hard to realize, we started to look into the nature of design thinking and on how reasoning processes are at play in this design thinking. This investigation suggests that creative designing rests on a cyclic combination of abductive, deductive and inductive reasoning processes. Because traditional information systems typically target only one of these reasoning processes at a time, this could explain the limited applicability and usefulness of these systems. As research in information technology is increasingly targeting the combination of these reasoning modes, improvements may be within reach for design thinking support by information systems

Information system support in construction industry with semantic web technologies and/or autonomous reasoning agents

Information technology support is hard to find for the early design phases of the architectural design process. Many of the existing issues in such design decision support tools appear to be caused by a mismatch between the ways in which designers think and the ways in which information systems aim to give support. We therefore started an investigation of existing theories of design thinking, compared to the way in which design decision support systems provide information to the designer. We identify two main strategies towards information system support in the early design phase: (1) applications for making design try-outs, and (2) applications as autonomous reasoning agents. We outline preview implementations for both approaches and indicate to what extent these strategies can be used to improve information system support for the architectural designer

BIM semantic-enrichment for built heritage representation

In the built heritage context, BIM has shown difficulties in representing and managing the large and complex knowledge related to non-geometrical aspects of the heritage. Within this scope, this paper focuses on a domain-specific semantic-enrichment of BIM methodology, aimed at fulfilling semantic representation requirements of built heritage through Semantic Web technologies. To develop this semantic-enriched BIM approach, this research relies on the integration of a BIM environment with a knowledge base created through information ontologies. The result is knowledge base system - and a prototypal platform - that enhances semantic representation capabilities of BIM application to architectural heritage processes. It solves the issue of knowledge formalization in cultural heritage informative models, favouring a deeper comprehension and interpretation of all the building aspects. Its open structure allows future research to customize, scale and adapt the knowledge base different typologies of artefacts and heritage activities

Integrating the common variability language with multilanguage annotations for web engineering

Web applications development involves managing a high diversity of files and resources like code, pages or style sheets, implemented in different languages. To deal with the automatic generation of custom-made configurations of web applications, industry usually adopts annotation-based approaches even though the majority of studies encourage the use of composition-based approaches to implement Software Product Lines. Recent work tries to combine both approaches to get the complementary benefits. However, technological companies are reticent to adopt new development paradigms such as feature-oriented programming or aspect-oriented programming. Moreover, it is extremely difficult, or even impossible, to apply these programming models to web applications, mainly because of their multilingual nature, since their development involves multiple types of source code (Java, Groovy, JavaScript), templates (HTML, Markdown, XML), style sheet files (CSS and its variants, such as SCSS), and other files (JSON, YML, shell scripts). We propose to use the Common Variability Language as a composition-based approach and integrate annotations to manage fine grained variability of a Software Product Line for web applications. In this paper, we (i) show that existing composition and annotation-based approaches, including some well-known combinations, are not appropriate to model and implement the variability of web applications; and (ii) present a combined approach that effectively integrates annotations into a composition-based approach for web applications. We implement our approach and show its applicability with an industrial real-world system.Universidad de Málaga. Campus de Excelencia Internacional Andalucía Tech

Technology adoption in the BIM implementation for lean architectural practice

Justification for Research: the construction companies are facing barriers and challenges in BIM adoption as there is no clear guidance or best practice studies from which they can learn and build up their capacity for BIM use in order to increase productivity, efficiency, quality, and to attain competitive advantages in the global market and to achieve the targets in environmental sustainability. Purpose: this paper aims to explain a comprehensive and systemic evaluation and assessment of the relevant BIM technologies as part of the BIM adoption and implementation to demonstrate how efficiency gains have been achieved towards a lean architectural practice. Design/Methodology/Approach: The research is undertaken through a KTP (Knowledge transfer Partnership) project between the University of Salford and the John McCall Architects based in Liverpool, which is an SME (Small Medium Enterprise). The overall aim of KTP is to develop Lean Design Practice through the BIM adoption and implementation. The overall BIM implementation approach uses a socio-technical view in which it does not only consider the implementation of technology but also considers the socio-cultural environment that provides the context for its implementation. The technology adoption methodology within the BIM implementation approach is the action research oriented qualitative and quantitative research for discovery, comparison, and experimentation as the KTP project with JMA provides an environment for “learning by doing” Findings: research has proved that BIM technology adoption should be undertaken with a bottom-up approach rather than top-down approach for successful change management and dealing with the resistance to change. As a result of the BIM technology adoption, efficiency gains are achieved through the piloting projects and the design process is improved through the elimination of wastes and value generation. Originality/Value: successful BIM adoption needs an implementation strategy. However, at operational level, it is imperative that professional guidelines are required as part of the implementation strategy. This paper introduces a systematic approach for BIM technology adoption based on a case study implementation and it demonstrates a guideline at operational level for other SME companies of architectural practices

Evaluation of Cognitive Architectures for Cyber-Physical Production Systems

Cyber-physical production systems (CPPS) integrate physical and computational resources due to increasingly available sensors and processing power. This enables the usage of data, to create additional benefit, such as condition monitoring or optimization. These capabilities can lead to cognition, such that the system is able to adapt independently to changing circumstances by learning from additional sensors information. Developing a reference architecture for the design of CPPS and standardization of machines and software interfaces is crucial to enable compatibility of data usage between different machine models and vendors. This paper analysis existing reference architecture regarding their cognitive abilities, based on requirements that are derived from three different use cases. The results from the evaluation of the reference architectures, which include two instances that stem from the field of cognitive science, reveal a gap in the applicability of the architectures regarding the generalizability and the level of abstraction. While reference architectures from the field of automation are suitable to address use case specific requirements, and do not address the general requirements, especially w.r.t. adaptability, the examples from the field of cognitive science are well usable to reach a high level of adaption and cognition. It is desirable to merge advantages of both classes of architectures to address challenges in the field of CPPS in Industrie 4.0

Multimedia and Knowledge-based Computer-aided Architectural Design

It appears by now fairly accepted to many researchers in the field of the Computer Aided Architectural Design that the way to realize support tools for these aims is by means of the realization of Knowledge Based Assistants. This kind of computer programs, based on the knowledge engineering, finds their power and efficaciousness by their knowledge bases. Nowdays this kind of tools is leaving the research world and it appears evident that the common graphic interfaces and the modalities of dialogue between the architect and the computer, are inadequate to support the exchange of information that the use of these tools requires. The use of the knowledge bases furthermore, presupposes that the conceptual model of the building realized by others, must be made entirely understandable to the architect . The CAAD Laboratory has carried out a system software prototype based on Knowledge Engineering in the field of hospital buildings. In order to overcame the limit of software systems based on usual Knowledge Engineering, by improving architect-computer interaction, at CAAD Lab it is refining building model introducing into the knowledge base two complementary each other methodologies: the conceptual clustering and multimedia technics. This research will make it possible for architects navigate consciously through the domain of the knowledge base already implemented

Report from GI-Dagstuhl Seminar 16394: Software Performance Engineering in the DevOps World

This report documents the program and the outcomes of GI-Dagstuhl Seminar 16394 "Software Performance Engineering in the DevOps World". The seminar addressed the problem of performance-aware DevOps. Both, DevOps and performance engineering have been growing trends over the past one to two years, in no small part due to the rise in importance of identifying performance anomalies in the operations (Ops) of cloud and big data systems and feeding these back to the development (Dev). However, so far, the research community has treated software engineering, performance engineering, and cloud computing mostly as individual research areas. We aimed to identify cross-community collaboration, and to set the path for long-lasting collaborations towards performance-aware DevOps. The main goal of the seminar was to bring together young researchers (PhD students in a later stage of their PhD, as well as PostDocs or Junior Professors) in the areas of (i) software engineering, (ii) performance engineering, and (iii) cloud computing and big data to present their current research projects, to exchange experience and expertise, to discuss research challenges, and to develop ideas for future collaborations