54 research outputs found

    Low-complexity iterative detection techniques for Slow-Frequency-Hop spread-spectrum communications with Reed-Solomon coding.

    Get PDF
    Slow-frequency-hop (SFH) spread-spectrum communications provide a high level of robustness in packet-radio networks for both military and commercial applications. The use of a Reed-Solomon (R-S) code has proven to be a good choice for use in a SFH system for countering the critical channel impairments of partial-band fading and partial-band interference. In particular, it is effective when reliability information of dwell intervals and individual code symbols can be obtained and errors-and-erasures decoding (EE) can be employed at the receiver. In this dissertation, we consider high-data-rate SFH communications for which the channel in each frequency slot is frequency selective, manifesting itself as intersymbol interference (ISI) at the receiver. The use of a packet-level iterative equalization and decoding technique is considered in conjunction with a SFH system employing R-S coding. In each packet-level iteration, MLSE equalization followed by bounded distance EE decoding is used in each dwell interval. Several per-dwell interleaver designs are considered for the SFH systems and it is shown that packet-level iterations result in a significant improvement in performance with a modest increase in detection complexity for a variety of ISI channels. The use of differential encoding in conjunction with the SFH system and packet-level iterations is also considered, and it is shown to provide further improvements in performance with only a modest additional increase in detection complexity. SFH systems employing packet-level iterations with and without differential encoding are evaluated for channels with partial-band interference. Comparisons are made between the performance of this system and the performance of SFH systems using some other codes and iterative decoding techniques

    Performance evaluation of communication systems with transmit diversity

    Get PDF
    Transmit diversity is a key technique to combat fading with multiple transmit antennae for next-generation wireless communication systems. Space-time block code (STBC) is a main component of this technique. This dissertation consists of four parts: the first three discuss performance evaluation of STBCs in various circumstances, the fourth outlines a novel differential scheme with full transmit diversity. In the first part, closed-form expressions for the bit error rate (BER) are derived for STBC based on Alamouti\u27s scheme and utilizing M-ary phase shift keying (MPSK) modulation. The analysis is carried out for a slow, flat Rayleigh fading channel with coherent detection and with non-coherent differential encoding/decoding. The BER expression for coherent detection is exact. But for differential detection it is an approximation appropriate for a high signal-to-noise ratio. Numerical results are provided for analysis and simulations for BPSK and QPSK modulations. A signal-to-noise ratio loss of approximately 3 dB always occurs with conventional differential detection for STBC compared to coherent detection. In the second part of this dissertation, a multiple-symbol differential detection (MSDD) technique is proposed for MPSK STBCs, which greatly reduces this performance loss by extending the observation interval for decoding. The technique uses maximum likelihood block sequence detection instead of traditional block-by-block detection and is carried out on the slow, flat Rayleigh fading channel. A generalized decision metric for an observation interval of N blocks is derived. It is shown that for a moderate number of blocks, MSDD provides more than 1.0 dB performance improvement corresponding to conventional differential detection. In addition, a closed-form pairwise error probability for differential BPSI( STBC is derived for an observation interval of N blocks, and an approximate BER is obtained to evaluate the performance. In the third part, the BER performance of STBC over a spatio-temporal correlated channel with coherent and noncoherent detection is illustrated, where a general space-time correlation model is utilized. The simulation results demonstrate that spatial correlation negatively effects the performance of the STBC scheme with differential detection but temporal correlation positively impacts it. However, with coherent detection, spatial correlation still has negative effect on the performance but temporal correlation has no impact on it. In the final part of this dissertation, a differential detection scheme for DS/CDMA MIMO link is presented. The transmission provides for full transmit and receive diversity gain using a simple detection scheme, which is a natural extension of differential detection combined with an orthogonal transmit diversity (OTD) approach. A capacity analysis for this scheme is illustrated

    Multicarrier Frequency Hopping Spread Spectrum Techniques With Quasi-Cyclic Low Density Parity Check Codes Channel Coding

    Get PDF
    This work presents a new proposed Multicarrier Frequency Hopping Spread Spectrum (MCFH-SS) system employing Quasi-Cyclic Low Density Parity Check (QC-LDPC) codes instead of the conventional LDPC codes. A new technique for constructing the QC-LDPC codes based on row division method is proposed. The new codes offer more flexibility in terms of high girth, multiple code rates and block length. Moreover, a new scheme for channel prediction in MCFH-SS system is proposed. The technique adaptively estimates the channel conditions and eliminates the need for the system to transmit a request message prior to transmitting the packet data. The ready-to-use channel will be occupied with a Pseudonoise (PN) code and use for transmission or else, it will be banned

    Borman Expressway Point-to-Point Wireless Modem

    Get PDF
    The Federal Highway Administration has a nationwide allocation of five frequency pairs in the 220-222 MHz Narrowband Radio Services band which are intended for application in Intelligent Transportation Systems. These frequencies are available for use by state DOTs (subject to FHWA approval) and provide an attractive solution for certain low to medium bit rate data communications applications. However, given the limited bandwidth available in these channels, very efficient modems will be required to make maximum beneficial use of this resource. The goal of this project was to design, field test, and deploy a digital radio which uses the 220-222 MHz spectral allocation and is suitable for stationary point-to-point data communications applications. The target application for this project was the control (pan, tilt, and zoom) of a video camera located at the interchange of I-65 and the Borman Expressway. The wireless link extends from the camera location to the traffic operations center (approximately 1.5 miles). There were three main tasks needed to produce a deployable modem: 1) interface circuitry was required between the 220 MHz modem and the camera control keypad and the camera pan/tilt/zoom receiver, 2) the fabrication of a compact and rugged transmitter was required, and 3) the fabrication of a compact and rugged receiver was required. The receiver size constraints were more exacting than those of the transmitter as the receiver is deployed in a roadside cabinet, while the transmitter is deployed in the traffic management center. The work plan was divided into a set of twelve tasks. The 220 MHz modem can serve INDOT as a general purpose link for low to medium rate data communications in a wide variety of applications. The most significant issue outstanding with regard to widespread implementation of the technology is the mass production cost and the availability of a reliable source of production versions of the device. Efforts are continuing at both Purdue and Ohio State toward further simplifications aimed at complexity reduction in the receiver. As topics for further study, the following should be considered: 1) a detailed cost/benefit analysis should be made comparing the 220 MHz technology to other alternative technologies, and 2) a preliminary design study of interoperability issues should be performed for the 220 MHz technology in transportation applications

    Advanced Modulation and Coding Technology Conference

    Get PDF
    The objectives, approach, and status of all current LeRC-sponsored industry contracts and university grants are presented. The following topics are covered: (1) the LeRC Space Communications Program, and Advanced Modulation and Coding Projects; (2) the status of four contracts for development of proof-of-concept modems; (3) modulation and coding work done under three university grants, two small business innovation research contracts, and two demonstration model hardware development contracts; and (4) technology needs and opportunities for future missions

    Optical repetition MIMO transmission with multipulse PPM

    Full text link

    Proceedings of the Second International Mobile Satellite Conference (IMSC 1990)

    Get PDF
    Presented here are the proceedings of the Second International Mobile Satellite Conference (IMSC), held June 17-20, 1990 in Ottawa, Canada. Topics covered include future mobile satellite communications concepts, aeronautical applications, modulation and coding, propagation and experimental systems, mobile terminal equipment, network architecture and control, regulatory and policy considerations, vehicle antennas, and speech compression
    corecore